Solectron FORCE SPARC/CPU-5V Manuale utente

SPARC/CPU-5V

Installation Guide

P/N 203652 Revision AB

November 2001

The information in this publication is subject to change without notice. Force Computers, GmbH reserves the right to make

changes without notice to this, or any of its products, to improve reliability, performance, or design.

Force Computers, GmbH shall not be liable for technical or editorial errors or omissions contained herein, nor for indirect, special,

incidental, or consequential damages resulting from the furnishing, performance, or use of this material. This information is pro-

vided “as is” and Force Computers, GmbH expressly disclaims any and all warranties, express, implied, statutory, or otherwise,

including without limitation, any express, statutory, or implied warranty of merchantability, fitness for a particular purpose, or

non-infringement.

This publication contains information protected by copyright. This publication shall not be reproduced, transmitted, or stored in

a retrieval system, nor its contents used for any purpose, without the prior written consent of Force Computers, GmbH.

Force Computers, GmbH assumes no responsibility for the use of any circuitry other than circuitry that is part of a product of

Force Computers, GmbH. Force Computers, GmbH does not convey to the purchaser of the product described herein any license

under the patent rights of Force Computers, GmbH nor the rights of others.

The Force logo is a trademark of Force Computers, GmbH.

IEEE is a registered trademark of the Institute for Electrical and Electronics Engineers, Inc.

PICMG, CompactPCI, and the CompactPCI logo are registered trademarks and the PICMG logo is a trademark of the PCI Indus-

trial Computer Manufacturer’s Group.

MS-DOS, Windows95, Windows98, Windows2000 and Windows NT are registered trademarks and the logos are a trademark of

the Microsoft Corporation.

Intel and Pentium are registered trademarks and the Intel logo is a trademark of the Intel Corporation.

Other product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.

203652 420 000 AB

World Wide Web: www.forcecomputers.com

24-hour access to on-line manuals, driver updates, and application notes

is provided via SMART, our SolutionsPLUS customer support program

that provides current technical and services information.

Headquarters

The Americas Europe Asia

Force Computers Inc.

5799 Fontanoso Way

San Jose, CA 95138-1015

U.S.A.

Tel.: +1 (408) 369-6000

Fax: +1 (408) 371-3382

Email: [email protected]

Force Computers GmbH

Prof.-Messerschmitt-Str. 1

D-85579 Neubiberg/München

Germany

Tel.: +49 (89) 608 14-0

Fax: +49 (89) 609 77 93

Email: [email protected]e

Force Computers Japan KK

Shiba Daimon MF Building 4F

2-1-16 Shiba Daimon

Minato-ku, Tokyo 105-0012 Japan

Tel.: +81 (03) 3437 3948

Fax: +81 (03) 3437 3968

Email: [email protected]

Contents

SPARC/CPU-5V Page v

Table of Contents

1 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 5

3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1 Location Diagram of the SPARC CPU-5V Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.2 Before Powering Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.2.1 Default Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3 Powering Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.3.1 VME Slot-1 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.3.2 VMEbus SYSRESET Enable/Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.3.2.1 SYSRESET Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.3.2.2 SYSRESET Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.3.3 Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.4 RESET and ABORT Key Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.5 CSI Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.5.1 SCSI Termination at the Front Panel . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.5.2 SCSI Termination at P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.6 Boot Flash Memory Write Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.7 User Flash Memory Write Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3.8 Reserved Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.3.9 Parallel Port or Floppy Interface via VME P2 Connector . . . . . . . . . . . . . . . . . 18

3.3.10 Ethernet via Front Panel or VME P2 Connector . . . . . . . . . . . . . . . . . . . . . . . 19

3.4 OpenBoot Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4.1 Boot the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.4.2 NVRAM Boot Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.4.3 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.4.4 Display System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Contents

Page vi SPARC/CPU-5V

3.4.5 Reset the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.4.6 OpenBoot Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.5 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.5.1 Features of the Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.6 SPARC CPU-5V Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.6.1 Ethernet Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.6.2 Serial Port A and B Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

3.6.3 SCSI Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.6.4 Keyboard/Mouse Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.6.5 VME P2 Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.6.6 The IOBP-10 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.7 Ethernet Address and Host ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

3.8 History of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Product Error Report

Contents

SPARC/CPU-5V Page vii

List of Figures

Figure 1. Diagram of the CPU-5V (Top View) .......................................................10

Figure 2. Diagram of the CPU-5V (Bottom View) ..................................................11

Figure 3. Floppy Interface Via VME P2 Connector ................................................18

Figure 4. Ethernet Interface via Front Panel ............................................................20

Figure 5. Diagram of the Front Panel ......................................................................30

Figure 6. Pinout of the Ethernet Cable Connector ...................................................33

Figure 7. Serial Ports A and B Connector Pinout ....................................................34

Figure 8. Pinout of SCSI Connector ........................................................................36

Figure 9. Keyboard/Mouse Connector .....................................................................37

Figure 10. The IOBP-10 .............................................................................................39

Contents

Page viii SPARC/CPU-5V

List of Tables

Default Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Tab. 1

Device Alias Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Tab. 2

Setting Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Tab. 3

Diagnostic Routines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Tab. 4

Commands to Display System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Tab. 5

Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Tab. 6

SPARC CPU-5V Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Tab. 7

Ethernet Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Tab. 8

Serial Port A and B Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Tab. 9

SCSI 50-Pin Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Tab. 10

Keyboard/Mouse Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Tab. 11

VME P2 Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Tab. 12

IOBP-10 P1 Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Tab. 13

IOBP-10 P2 Pinout (SCSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Tab. 14

IOBP-10 P3 Pinout (Floppy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Tab. 15

IOBP-10 P4 Pinout (Centronics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Tab. 16

IOBP-10 P5 Pinout (Serial) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Tab. 17

IOBP-10 P6 Pinout (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Tab. 18

Safety Notes

SPARC/CPU-5V Page 1

1 Safety Notes

This section provides safety precautions to follow when installing, op-

erating, and maintaining the SPARC/CPU-5V. For your protection,

follow all warnings and instructions found in the following text.

General

Notes This Installation Guide provides the necessary information to install

and handle the SPARC/CPU-5V. As the product is complex and its

usage manifold, we do not guarantee that the given information is

complete. In case you need additional information, ask your Force

Computers representative.

The SPARC/CPU-5V has been designed to meet the standard indus-

trial safety requirements. It must not be used except in its specific

area of office telecommunication industry and industrial control.

Only personnel trained by Force Computers or qualified persons in

electronics or electrical engineering are authorized to install, unin-

stall or maintain the SPARC/CPU-5V. The information given in this

manual is meant to complete the knowledge of a specialist and must

not be taken as replacement for qualified personnel.

Make sure that contacts and cables of the board cannot be touched

while the board is operating.

Installation Electrostatic discharge and incorrect board installation and uninstal-

lation can damage circuits or shorten their life. Therefore:

• Before installing the board or uninstalling the board, read this

Installation Guide.

• Before installing or uninstalling the board in a VME rack:

– Check all installed boards for steps that you have to take

before turning off the power.

– Take those steps.

– Finally turn off the power.

• Before touching integrated circuits, ensure that you are working

in an electrostatic free environment.

• Ensure that the board is connected to the VMEbus via both con-

nectors, the P1 and the P2 and that power is available on both.

Safety Notes

Page 2 SPARC/CPU-5V

• When operating the board in areas of strong electro-magnetic

radiation, ensure that the board is:

– Bolted on the VME rack

– Shielded by closed housing

• When plugging the board in or removing it, do not press on the

front panel but use the handles.

• Before installing or uninstalling the board, read section 3 “Intro-

duction” on page 9.

• Before installing or uninstalling an additional device or module,

read the respective documentation.

• Software must not enable or disable the VME Slot 1 Function in

a way which contradicts with the switch setting of SW8-2. Take

care not to change the value of bit 1 in the Global Control and

Status Register (GCSR) of the FGA-5000. Please see the FGA-

5000 Reference Guide for further details.

• Before installing the SPARC CPU-5V in a miniforce chassis,

please first disable the VMEbus System Controller function by

setting switch SW8-2 to OFF and also setting SW7-4 to OFF.

Operation • When operating the board in areas of strong electromagnetic

radiation ensure that the board is bolted on the VME rack and

shielded by closed housing.

• Do not switch SW7-4 (SYSRESET output) to ON and SW8-2

(VMEbus Slot-1 device) to OFF at the same time.

• When the Ethernet interface is configured via VMEbus P2, do

not connect the Ethernet at the front panel.

• The IOBP-10 back panel is especially designed for the SPARC

CPU-5V. Do not use any other I/O back panels on the SPARC

CPU-5V, for example, the IOBP-1.

EMC • If boards are integrated into open systems, always cover empty

slots.

Expansion • Check the total power consumption of all components installed

(see the technical specification of the respective components).

• Ensure that any individual output current of any source stays

within its acceptable limits (see the technical specification of the

respective source).

Indice

Altri manuali Solectron Computer a scheda singola

Solectron

Solectron Force Computers Alpha VME 5/352 Manuale utente

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente