SOMFY Sonesse Ultra 50 RTS Manuale utente

Ref. 5120786B

EN INSTRUCTIONS

FR NOTICE

IT MANUALE

ES MANUAL

PT GUIA

ZH 䇈ᯢ

KO ໕ᆳხᆹ

ΏϳϛέΗϟ΍ϝϳϟΩ AR

Sonesse Ultra 50 RTS

Sonesse Ultra 50 RTS RH

www.somfy.com

Images not contractually binding

ORIGINAL GUIDE

1. PREREQUISITE INFORMATION

1.1 FIELDS OF APPLICATION

The Sonesse 50 motor is designed to operate indoor applications (Roller blinds and projection

screens).

The Sonesse 50 motor is designed to operate multi-banding roller blinds.

The Sonesse 50 motor is designed to operate multiple roller blinds simultaneously, where these are

interconnected by an intermediate bracket.

The Sonesse 50 motor is not designed to be used with a compensating spring.

$Q\XVHRXWVLGHWKH¿HOGVRIDSSOLFDWLRQLVSURKLELWHGLQSDUWLFXODU

7KH6RQHVVHPRWRULVQRWGHVLJQHGIRURXWGRRUDSSOLFDWLRQVHJRXWGRRUYHUWLFDOEOLQGV

roller shutters, etc.).

7KH LQVWDOOHU ZKR PXVW EH D PRWRULVDWLRQ DQG KRPH DXWRPDWLRQ SURIHVVLRQDO PXVW HQVXUH WKDW WKH

PRWRULVHGSURGXFWLVLQVWDOOHGLQDFFRUGDQFHZLWKWKHVWDQGDUGVLQIRUFHLQWKHFRXQWU\LQZKLFKLWLVLQVWDOOHG

such as EN 13120 relating to interior blinds.

7KH6RQHVVH8OWUD576PRWRUKDVEHHQGHYHORSHGIRULQGRRUXVH

,WVTXLHWRSHUDWLRQHQVXUHVXVHUFRPIRUWDQGZHOOEHLQJ

)RUPRUHLQIRUPDWLRQ DQG WR RSWLPLVH WKH DFRXVWLFSHUIRUPDQFHRI\RXU LQGRRU DSSOLFDWLRQ

SOHDVHFRQWDFWD6RPI\DGYLVHU

These instructions apply to all Sonesse Ultra 50 RTS and Sonesse Ultra 50 RTS RH motor

LUUHVSHFWLYHRIWRUTXHDQGVSHHGYDULDWLRQV

CONTENTS

1. Prerequisite information 2

)LHOGVRIDSSOLFDWLRQ 

1.2 Liability 3

2. Installation 3

2.1. Installation 3

2.2. Wiring 4

2.3. Commissioning 5

7LSVDQGUHFRPPHQGDWLRQVIRULQVWDOODWLRQ 

3. Use and maintenance 8

3.1. Up and Down buttons 8

6723IXQFWLRQ 

)DYRULWHSRVLWLRQP\ 

$GGLWLRQDOVHWWLQJV 

7LSVDQGUHFRPPHQGDWLRQVIRUXVH 

4. Technical data 10

1.2 LIABILITY

%HIRUHLQVWDOOLQJDQGXVLQJWKHPRWRUSOHDVHUHDGoperating and installation guide carefully.

,Q DGGLWLRQ WR IROORZLQJ WKH LQVWUXFWLRQV JLYHQ LQ WKLV JXLGH WKH LQVWUXFWLRQV GHWDLOHG LQ WKH

attached Safety instructionsGRFXPHQWPXVWDOVREHREVHUYHG

The motor must be installed by a motor and home automation professional, according

to instructions from Somfy and the regulations applicable in the country in which it is

commissioned.

,WLVSURKLELWHGWRXVHWKHPRWRURXWVLGHWKH¿HOGVRIDSSOLFDWLRQGHVFULEHGDERYH6XFKXVH

DQGDQ\IDLOXUHWRFRPSO\ZLWKWKHLQVWUXFWLRQVJLYHQLQWKLVJXLGHDQGLQWKHDWWDFKHGSafety

instructionsGRFXPHQWDEVROYHV6RPI\IURPDQ\OLDELOLW\DQGLQYDOLGDWHVWKHZDUUDQW\

7KHLQVWDOOHUPXVWLQIRUPLWVFXVWRPHUVRIWKHRSHUDWLQJDQGPDLQWHQDQFHFRQGLWLRQVIRUWKH

PRWRUDQGPXVWSURYLGHWKHPZLWKWKHLQVWUXFWLRQVIRUXVHDQGPDLQWHQDQFHDQGWKHDWWDFKHG

Safety instructionsGRFXPHQWDIWHULQVWDOOLQJWKHPRWRU$Q\ $IWHU6DOHV6HUYLFHRSHUDWLRQRQ

WKHPRWRUPXVWEHSHUIRUPHGE\DPRWRUDQGKRPHDXWRPDWLRQSURIHVVLRQDO

,ILQGRXEWZKHQLQVWDOOLQJWKHPRWRURUWRREWDLQDGGLWLRQDOLQIRUPDWLRQFRQWDFWD6RPI\DGYLVHU

RUJRWRWKHZHEVLWHZZZVRPI\FRP

2. INSTALLATION

Instructions which mustEHIROORZHGE\WKHPRWRUDQGKRPHDXWRPDWLRQSURIHVVLRQDO

installing the motor.

1HYHUGURSNQRFNGULOORUVXEPHUJHWKHPRWRU

,QVWDOODVHSDUDWHFRQWUROSRLQWIRUHDFKPRWRU

To optim ize ultra quiet operation, the mecha nic al p lay s be twe en m otor, access ories, tube

DQGHQGRIWXEHPXVWEHGHFUHDVHGWRWKHPD[LPXP

2.1. INSTALLATION

2.1.1. Preparing the motor

&KHFN WKDW WKH LQQHU GLDPHWHU RI WKH WXEH JUHDWHU WKDQ

47mm.

1) Fit the accessories required to integrate the motor in the

UROOHUWXEH

• Fit the crown a, the motor wheel b and the stop wheel c

on the motor.

The stop wheel must be screwed with a torque ranging

between 1.5 and 1.8 Nm.

0HDVXUHWKHOHQJWK/EHWZHHQWKHLQQHUHGJHRIWKH

PRWRUKHDGDQGWKHHGJHRIWKHPRWRUZKHHO

2.1.2. Tube preparation

1) Cut the roller tube to the required length, depending on

the motorised product.

'HEXUUWKHUROOHUWXEHDQGUHPRYHWKHVZDUI

1) 2)

6DIHW\ZDUQLQJ ,QIRUPDWLRQ ȁ Up V Down

1&DXWLRQ

L1 = …

Ø > 47 mm

ba c

Images not contractually binding

2.2. WIRING

Cables which pass through a metal wall must be protected and isolated using a grommet

RUVOHHYH

$WWDFKFDEOHVWRSUHYHQWDQ\FRQWDFWZLWKPRYLQJSDUWV

7KHFDEOHRQWKH6RQHVVH8OWUDFDQEHUHPRYHG,ILWLVGDPDJHGUHSODFHLWZLWKDQLGHQWLFDOFDEOH

1/HDYHWKHPRWRUSRZHUVXSSO\FDEOHDFFHVVLEOHLWPXVWEHSRVVLEOHWRUHSODFHLWHDVLO\

- 6ZLWFKRIIWKHSRZHUVXSSO\

- &RQQHFWWKHPRWRUDFFRUGLQJWRWKHLQIRUPDWLRQLQWKHWDEOHEHORZ

Neutral (N) /LYH/ Earth ( )

120V +] White Black Green

230V 50 Hz Blue Brown Yellow/Green

220V +]

US PIGTAIL CONNECTOR CABLE

Neutral (N) /LYH/ Earth ( )

9+] White Black Green

2.1.3. Motor/tube assembly

1) Slide the motor into the roller tube.

7KHPRWRUZKHHOPXVWEHORFNHGLQSODFHWRSUHYHQW

PRYHPHQWLQVLGHWKHUROOHUWXEH

• 7KLVFDQEHGRQHHLWKHUE\¿[LQJWKHUROOHUWXEHWRWKH

PRWRUZKHHOXVLQJ[PPVHOIWDSSLQJVFUHZV

RU E\ XVLQJ  [   PP VWHHO SRS ULYHWV SODFHG

 PP WR  PP IURP WKH RXWHU HGJH RI WKH PRWRU

ZKHHOUHJDUGOHVVRIWKHUROOHUWXEH

7KH VFUHZV RU SRS ULYHWV PXVW RQO\ EH DWWDFKHG WR WKH PRWRU

wheel and not to the motor.

3) Slide the end cap into the roller tube and ensure that the

assembly is solid.

2.1.4. Installing the motor/tube assembly

1The motorised product must not be compressed between the brackets.

,QVWDOODQG¿[WKHPRWRUWXEHDVVHPEO\RQWRWKHHQG

bracket f and onto the motor bracket g

1Ensure that the motor/tube assembly is secured onto the

HQG EUDFNHW 7KLV RSHUDWLRQ SUHYHQWV WKH PRWRUWXEH

DVVHPEO\ IURP FRPLQJ RXW RI WKH HQG EUDFNHW PRXQWLQJ

when the roller blind reaches the lower end limit position.

2) For star head motors, ensure the stop ring h in place.

15 mm

5 mm

20 mm

2.3. COMMISSIONING

2.3.1. Pre-programming the RTS control point

1) Switch on the power supply.

2) Press the ȁ and V buttons on the RTS control

SRLQWDWWKHVDPHWLPH7KHPRWRULVHGSURGXFWPRYHV

XSDQGGRZQIDVWUDLVLQJDQGORZHULQJDQGWKH576

control point is pre-programmed in the motor.

2.3.2. Checking the direction of rotation

1) Press the ȁEXWWRQRQWKH576FRQWUROSRLQW

D,IWKHPRWRULVHGSURGXFWULVHVDWKHGLUHFWLRQ

RI URWDWLRQ LV FRUUHFW 0RYH RQWR WKH VHFWLRQ

entitled “Setting the end limits”.

E,IWKHPRWRULVHGSURGXFWORZHUVEWKHGLUHFWLRQ

RIURWDWLRQLVLQFRUUHFW0RYHRQWRWKHQH[WVWHS

2) Press the my button on the RTS control point

XQWLOWKHPRWRULVHGSURGXFWPRYHVXSDQGGRZQ7KH

GLUHFWLRQRIURWDWLRQKDVEHHQPRGL¿HG

3) Press the ȁ button on the RTS control point to

FKHFNWKHGLUHFWLRQRIURWDWLRQ

2.3.3. Setting the end limits

The end limits can be set in any order.

1) Raise the motorised product to the desired position

by pressing the ȁ button.

2) Press the my and V buttons at the same time until

WKHPRWRULVHGSURGXFWPRYHV

The upper end limit is memorised.

3) Press the my button when the motorised product

UHDFKHVWKHGHVLUHG ORZHUHG SRVLWLRQ ,I QHFHVVDU\

DGMXVWWKHSRVLWLRQRIWKHPRWRULVHGSURGXFWXVLQJWKH

ȁ and V buttons.

4) Press the my and ȁ buttons at the same time until

WKHPRWRULVHGSURGXFWPRYHV

The lower end limit is memorised. The motorised product rises and stops in the raised position.

2.3.4. Validation of the setting

7R FRQ¿UP WKH HQG OLPLWV SUHVV WKH my button until

WKHPRWRULVHGSURGXFWPRYHVXSDQGGRZQ

The end limits are programmed.

2) 3)

1) 2)

3) 4)

Images not contractually binding

2.3.5. Recording the RTS control point

7KHPRWRULVDWLRQLVLQSURJUDPPLQJPRGH

-- Quickly press the PROG button on the RTS control

SRLQWWREHSURJUDPPHG

ĺ7KH PRWRULVHG SURGXFW PRYHV XS DQG GRZQ WKLV

RTS control point is programmed in the motorisation.

If the motorisation is no longer in programming mode, repeat Step 2.3.1 then perform

Step 2.3.4.

2.3.6. Adding/Deleting Somfy control points and sensors

5HIHUWRWKHFRUUHVSRQGLQJJXLGH

2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1. Questions about the Sonesse Ultra 50 RTS?

PROG.

2EVHUYDWLRQV Possible causes Solutions

The motorised

product does not

operate.

The wiring is incorrect. &KHFNWKHZLULQJDQGPRGLI\LWLI

necessary.

The Motor is in thermal protection. Wait until the motor cools down.

The control point battery is weak. Check whether the battery is weak and

UHSODFHLWLIQHFHVVDU\

The control point is not

compatible. &KHFNIRUFRPSDWLELOLW\DQGUHSODFHWKH

FRQWUROSRLQWLIQHFHVVDU\

The control point used has not

been programmed into the motor.

Use a programmed control point or

program this control point.

The motorised

SURGXFWLVQRLV\ The motor wheel and the crown

DUHQRWVXLWDEOHIRUWKHWXEH Replace the motor wheel and the crown

The motorised product is com-

pressed between the brackets Increase the play between the brackets

7KHWXEHFRQWDLQVVZDUIDQG

screws. Clean the roller tube.

The motorised

product stop to soon

or to late.

7KHHQGOLPLWVRIWKHPRWRULVHG

SURGXFWGULIW Readjust the end-limits

11) 2)

3) 4)



PROG.

2.4.2. Readjusting the end limits

Readjusting the upper end limit

1) Press the ȁ button to bring the motorised

product to the end limit to be readjusted.

2) Press the ȁ and V buttons at the same time

until the motorised productPRYHVXSDQGGRZQ

3) Press the ȁ or V EXWWRQWRPRYHWKHmotorised

product to the new desired position.

7RFRQ¿UPWKHQHZHQGOLPLWSUHVVWKHmy

button until the motorised productPRYHVXSDQG

down.

Readjusting the lower end limit

1) Press the V button to bring the motorised

product to the end limit to be readjusted.

2) Press the ȁ and V buttons at the same time

until the motorised productPRYHVXSDQGGRZQ

3) Press the ȁ or V EXWWRQWRPRYHWKHmotorised

product to the new desired position.

7RFRQ¿UPWKHQHZHQGOLPLWSUHVVWKHmy

button until the motorised productPRYHVXSDQG

down.

2.4.3. Replacing a lost or broken Somfy control point

2QO\ VZLWFK RII WKH SRZHU WR WKH DSSOLFDWLRQ WR

be reset.

This reset deletes all the local control points,

KRZHYHU WKH VHQVRUV HQG OLPLW VHWWLQJV DQG

IDYRXULWHSRVLWLRQDUHUHWDLQHG

1) Position the motorised product at the mid-height

position.

2) 6ZLWFKRIIWKHSRZHUVXSSO\IRUVHFRQGV

3) 6ZLWFK WKH SRZHU VXSSO\ EDFN RQ IRU  WR 

seconds.

4) 6ZLWFKRIIWKHSRZHUVXSSO\IRUVHFRQGV

5) 6ZLWFK WKH SRZHU VXSSO\ EDFN RQ WKH motorised

productPRYHVIRUDIHZVHFRQGV,IWKHDSSOLFDWLRQ

is in the upper or lower limit position, it will make a

EULHIXSDQGGRZQPRYHPHQW

Press the PROG button on the new control point

until the motorised productPRYHVXSDQGGRZQ

the new control point is programmed and all the

other control points are deleted.

1) 2)

3) 4)

1) 2)

3) 4)

Images not contractually binding

5HVWRULQJWKHRULJLQDOFRQ¿JXUDWLRQ

2QO\ VZLWFK RII WKH SRZHU WR WKH DSSOLFDWLRQ WR

be reset.

This reset deletes all control points, all the sensors

and all the end limit settings, and resets the motor’s

IDYRXULWHSRVLWLRQP\

1) Position the motorised product at the mid-height

position.

2) &6ZLWFKRIIWKHSRZHUVXSSO\IRUVHFRQGV

3) 6ZLWFK WKH SRZHU VXSSO\ EDFN RQ IRU  WR 

seconds.

4) 6ZLWFKRIIWKHSRZHUVXSSO\IRUVHFRQGV

5) 6ZLWFK WKH SRZHU VXSSO\ EDFN RQ WKH motorised

productPRYHVIRUDIHZVHFRQGV,IWKHDSSOLFDWLRQ

LVDWWKHXSSHURUORZHUHQGOLPLWLWZLOOPDNHDEULHI

XSDQGGRZQPRYHPHQW

3UHVV WKH 352* EXWWRQ RQ WKH 6RPI\ ORFDO

control point IRU§VHFRQGVXQWLOWKHmotorised

productPRYHVXSDQGGRZQWZLFH

ĺThe motorisation is reset to the original

FRQ¿JXUDWLRQ

- Repeat the commissioning procedure (see

Commissioning) section.

3. USE AND MAINTENANCE

7KLVPRWRULVPDLQWHQDQFHIUHH

)RUWKHVDIHW\RIJRRGVDQGSHRSOH6RPI\PRWRUVDUHHTXLSSHGZLWKWKHUPDOSURWHFWLRQ

WKDWZLOOWULJJHUWKHPRWRUVWRSVLQWKHHYHQWRIRYHUKHDWLQJ

5HSHDWHGDFWLYDWLRQRIWKLVSURWHFWLRQFDQGHJUDGHPRWRUSHUIRUPDQFH

,IWKHPRWRUJRHVWRWKHUPDOSURWHFWLRQSOHDVHFKHFN\RXULQVWDOODWLRQDQGFKHFNWKDWWKH

PRWRULVUDWHGIRUWKHLQWHQGHGXVH

$QRUPDOLQVWDOODWLRQLVQRWH[SHFWHGWRWULJJHUWKLVSURWHFWLRQ

7RDYRLGWKHGULIWRIWKHHQGO LPLWVG RQRWFXWWKHSRZHUVXSSO\PRUHWKDQZHHN

3.1. UP AND DOWN BUTTONS

Pressing the ȁ or VEXWWRQIXOO\UDLVHVRUORZHUVWKH

motorised product.

3.2. STOP FUNCTION

7KHPRWRULVHGSURGXFWLVPRYLQJ

-%ULHÀ\ press my WKH PRWRULVHG SURGXFW VWRSV

automatically.

11) 2)

3) 4)



PROG.

X 2



3.3. FAVORITE POSITION (my)

%HVLGHV WKH XSSHU DQG ORZHU SRVLWLRQV DQ LQWHUPHGLDWH SRVLWLRQNQRZQDVWKH³IDYRXULWH

position (my)” can be programmed in the Sonesse 50.

7RXVHWKHIDYRXULWHSRVLWLRQ P\

-%ULHÀ\ press myWKHPRWRULVHGSURGXFWVWDUWVWR

PRYHDQGVWRSVLQWKHIDYRXULWHSRVLWLRQP\

7R P RG LI \ R U GH OH WH  WK H ID YR XU LW H P \  SR VL WLR Q  VH H 

the section entitled “Additional settings”.

3.4. ADDITIONAL SETTINGS

3.4.1. Record or Modify the favourite position

(my)

1) Place the motorised productLQWKHGHVLUHGIDYRXULWH

position (my).

2) Press myIRU§VHFRQGVXQWLOWKHmotorised

productPRYHVXSDQGGRZQWKHGHVLUHGIDYRXULWH

position (my) has been programmed.

3.4.2. Deleting the favourite position (my)

1) Press myWKHmotorised productVWDUWVWRPRYH

DQGVWRSVLQWKHIDYRXULWHSRVLWLRQP\

2) Press my again until the PRWRULVHGSURGXFWPRYHV

WKHIDYRXULWHSRVLWLRQP\LVGHOHWHG

3.5. TIPS AND RECOMMENDATIONS FOR USE

3.5.1. Questions about the Sonesse Ultra 50 RTS?

,I WKH PRWRULVHG SURGXFW VWLOO GRHV QRW ZRUN FRQWDFW D PRWRULVDWLRQ DQG KRPH DXWRPDWLRQ

SURIHVVLRQDO

3.5.2. Replacing a lost or broken Somfy control point

To replace a lost or broken control point, contact a motorisation and home automation

SURIHVVLRQDO

2EVHUYDWLRQV Possible causes Solutions

The motorised

product does not

operate.

The control point battery is weak. Check whether the battery is weak and

UHSODFHLWLIQHFHVVDU\

The motor is in thermal protection

mode. :DLWIRUWKHPRWRUWRFRROGRZQ

1) 2)

Images not contractually binding

4. TECHNICAL DATA

Power supply 230V 50 Hz 120V +] 220V +]

5DGLRIUHTXHQF\ 433.42 MHz 447.7 MHz

Operating temperature &WR&

,QGH[SURWHFWLRQUDWLQJ IP 31

6DIHW\OHYHO Class I

0D[LPXPQXPEHURIFRQWUROSRLQWV 12

0D[LPXPQXPEHURIVHQVRUV 3

6RPI\6$6)&/86(6DVPDQXIDFWXUHUKHUHE\GHFODUHVWKDWWKHGULYHFRYHUHGE\WKHVHLQVWUXFWLRQVZKHQ

PDUNHGIRULQSXWYROWDJH9a+]DQGXVHGDVLQWHQGHGDFFRUGLQJWRWKHVHLQVWUXFWLRQVLVLQFRPSOLDQFHZLWKWKH

HVVHQWLDOUHTXLUHPHQWVRIWKHDSSOLFDEOH(XURSHDQ'LUHFWLYHVDQGLQSDUWLFXODURIWKH0DFKLQHU\'LUHFWLYH

2006/42/ECDQGWKH5DGLR'LUHFWLYH2014/53/EU.

7KHIXOOWH[WRIWKH(8GHFODUDWLRQRIFRQIRUPLW\LVDYDLODEOHDWZZZVRPI\FRPFH

$QWRLQH&Up]p$SSURYDOPDQDJHUDFWLQJRQEHKDOIRI$FWLYLW\GLUHFWRU&OXVHV

Altri manuali per Sonesse Ultra 50 RTS

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali SOMFY Motore

SOMFY

SOMFY Cord Lift 32 RTS Manuale utente

SOMFY

SOMFY Tilt Only 50 WF RTS Manuale utente

SOMFY

SOMFY Glydea Ultra WT Manuale utente

SOMFY

SOMFY Sonesse 50 PA Manuale utente

SOMFY

SOMFY ILT 2 Manuale utente

SOMFY

SOMFY Sonesse 30 Manuale utente

SOMFY

SOMFY Roll Up Basic 28 WFRTS Li-ion Manuale utente

SOMFY

SOMFY VRA 10 Manuale utente

SOMFY

SOMFY RDO 50 CSI Manuale utente

SOMFY

SOMFY J4 RTS Istruzioni per il montaggio

SOMFY

SOMFY Elixo 500 230 V Manuale utente

SOMFY

SOMFY Altus Manuale utente

SOMFY

SOMFY LT RTS CMO Manuale operativo

SOMFY

SOMFY tecnoShades NO25 Manuale utente

SOMFY

SOMFY Sonesse 40 PA Manuale utente

SOMFY

SOMFY Altus Manuale utente

SOMFY

SOMFY Sonesse 40 io Manuale utente

SOMFY

SOMFY Sonesse Ultra 50 RTS Manuale utente

SOMFY

SOMFY ilmo 50 S WT Manuale utente

SOMFY

SOMFY ilmo 50 WT Manuale utente

SOMFY

SOMFY Sonesse Ultra 50 DC RS485 Manuale utente

SOMFY

SOMFY Irismo Wirefree Manuale utente

SOMFY

SOMFY Ilmo 40 WT Manuale utente

SOMFY

SOMFY Elite Smart Shades R28 WireFree RTS Istruzioni operative

Manuali Motore popolari di altre marche

Rotax

Rotax 125 senior MAX evo Manuale utente

Kohler

Kohler K361 Manuale utente

MTD

MTD OHV Series Manuale utente

Kohler

Kohler COMMAND CH18-745 Manuale utente

Mercury

Mercury D4.2L D-Tronic Manuale utente

Selve

Selve SE Plus-RC Series Manuale utente

Perkins

Perkins 1206E-E66TA Manuale utente

Skov

Skov DA 174 Manuale

Rossi

Rossi TX11 Series Manuale utente

Siemens

Siemens SIMOTICS T-1FW3 Foglio di istruzioni

AL-KO

AL-KO PRO 350 Manuale utente

MTU

MTU 12 V 4000 Lx4 Manuale utente

Nanni

Nanni N3.30 Manuale di istruzioni

Nanni

Nanni N5.160 CR2 Manuale utente

KSB

KSB SuPreme Series Istruzioni per l'installazione

Hiwin

Hiwin EM1 Series Manuale utente

Rotax

Rotax 912 i series Istruzioni operative

Siemens

Siemens SIMOTICS XP 1MB1 Manuale utente