SOMFY Dexxo Pro 800 Manuale utente

Installation instruction for the gate drive

Series Dexxo

Before programming the drive, the upper gate's limit switch must be installed.

The drive uses a movement limiter as reference points for automatically setting the upper end position. Upper position

limiter (when the door is fully open).

[1] [2]

The engine rail mounting bracket should be mounted in the lintel or on the ceiling, however not more than

200 mm from the lintel (see drawing)

AUTOSET function, setting the gate end positions.

Dexxo Pro/io 800/1000 [N]

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

The learning mode (AUTOSET) can be started each time the need arises.

The servomotor automatically selects the thrust force to the specic gate.

1. Press the key for approx. 2 seconds, the drive lamp will light up and go o. S2 will appear on the display.

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position.

4. Press to start the learning cycle (Autoset).

5. The gate will start a full OPEN / CLOSE cycle to automatically select the force.

6. C1 on the display - means conrmation of the correct execution of the Autoset function.

7. S0 or S1 is the negative result of the AUTOSET function. In this case, check the mechanics of the gate and try again.

Learning function, setting the gate end positions.

Dexxo Optimo 800N

The learning mode (AUTOSET) can be started each time the need arises.

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

1. Press the key for approx. 2 seconds until the lamp switches on. The display range indicator light ashes .

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position. Release the key before the drive will force

the gate.

4. Press to start the learning cycle.

5. The gate will start a full OPEN / CLOSE cycle to determine the upper end position.

6. If the learning cycle has been successfully completed, the indicator light is on.

7. If the learning cycle has not been completed correctly, the indicator light continues to ash.

PROGRAMMING OF REMOTE CONTROLS - Dexxo: Optimo, Pro, io

Press and hold the key for approx. 2 seconds (the bulb will light up). Press the selected key on the remote control

(the bulb will start ashing).

Reprogramming the same remote control (channel) removes it from the Dexxo memory.

ERASE SETTING

Pressing the button for 7 seconds (the - lamp will go o - ashing) will erase all saved settings.

Detailed information about Somfy Dexxo engines can be found in the package with the engine.

DELETION OF REMOTE CONTROL

Pressing the button for 7 seconds (the lamp will light - go o - ashing) will erase all previously saved transmitters.

www.ekookna.com

1/2018

Altri manuali per Dexxo Pro 800

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SOMFY Apricancello

SOMFY

SOMFY IXENGO J S 230V Manuale utente

SOMFY

SOMFY QuickCopy Manuale utente

SOMFY

SOMFY WISNIOWSKI Metro 800 RTS Manuale utente

SOMFY

SOMFY AXOVIA 220B RTS Manuale utente

SOMFY

SOMFY Elixo 500 3S RTS Manuale utente

SOMFY

SOMFY ELIXO 2000 230V RTS Manuale utente

SOMFY

SOMFY Axovia 220A Manuale utente

SOMFY

SOMFY FX230 Manuale utente

SOMFY

SOMFY Elixo 500 Manuale utente

SOMFY

SOMFY Ixengo L Manuale utente

SOMFY

SOMFY Ixengo L Manuale utente

SOMFY

SOMFY Telis 1 io Manuale utente

SOMFY

SOMFY SGS 201 Manuale utente

SOMFY

SOMFY tecnoShades NR0-Rn Manuale di installazione

SOMFY

SOMFY Axovia 170 SNS Manuale utente

SOMFY

SOMFY TaHoma Istruzioni per l'installazione

SOMFY

SOMFY ROLLIXO io Manuale utente

SOMFY

SOMFY FREEVIA 400 Manuale utente

SOMFY

SOMFY Passeo 500 Manuale utente

SOMFY

SOMFY FREEVIA Series Manuale utente

SOMFY

SOMFY Maestria 50 RTS Manuale utente

SOMFY

SOMFY SGA 2000 Manuale utente

SOMFY

SOMFY ELIXO SMART io Manuale utente

SOMFY

SOMFY Control Box 3S io Manuale utente

Manuali Apricancello popolari di altre marche

Elite

Elite CSW200UL Manuale utente

CAME

CAME FROG-PM4 Manuale utente

Aprimatic

Aprimatic ONDA 500 Manuale utente

Turnstiles

Turnstiles FSW 900 Manuale utente

Erreka

Erreka BUL BL33 Istruzioni operative

Erreka

Erreka VULCAN S Manuale utente

Beninca

Beninca R1-2 WBV Manuale utente

Erreka

Erreka VULCAN D Manuale utente

Motorline professional

Motorline professional FORT Manuale di istruzioni

Beninca

Beninca BOB5024 Manuale utente

AGA

AGA GATEMASTER 900 HD Manuale utente

Chamberlain

Chamberlain MotorLift HC280ML Manuale utente

Cardin

Cardin BL Series Manuale utente

Westfalia

Westfalia 85 27 06 Manuale utente

CAME

CAME F500 Manuale utente

Extel

Extel VERA Manuale utente

Comunello Automation

Comunello Automation ABACUS 220 Manuale utente

CAME

CAME FA40230CB Manuale utente