SonicWALL APL43-0C2 Manuale del proprietario

SonicWall SonicWave 432e

Safety and Regulatory Information

SonicWall SonicWave 432e Safety and

Regulatory Information

Regulatory Model Number APL43‐0C2

October 2019

Products with “UL 2043” printed on their product labels are within the limit specified in the “UL 2043 Standard for

Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air‐Handling Spaces” (Plenum).

Applies only when powered through PoE. The PoE power supply is not covered the by the UL 2043 evaluation of

this Access Point.

This document contains safety and regulatory information for the SonicWall SonicWave 432e. The SonicWave 432e

is a wireless access point with an internal wireless radio that can provide wireless access on either 5GHz or 2.4GHz

and supports the 802.11 ac/n/g/a/b standards.

Topics:

•Mounting the SonicWave 432e

•Safety Information for Installation and Operation

•Consignes de sécurité pour l'installation et l'utilisation

•Sicherheitshinweise für den Einbau und Betrieb

•安全信息安裝和操作

•安全信息安装和操作

•インストールと操作のための安全性情報

•설치 및운영에 대한안전 정보

•Informações Normativas e de Segurança

•Agency Specific Information

•Electromagnetic compatibility information

•EMC Agency Specific Information

SonicWall SonicWave 432e

Safety and Regulatory Information

Mounting the SonicWave 432e

You can mount your SonicWave 432e to a wall or ceiling, or you can simply set it on a flat surface. For safety tips

when mounting the SonicWave 432e, see Safety Information for Installation and Operation.

Topics:

•Mounting Using Ceiling Brackets

•Mounting Using Anchor Screws

Mounting Using Ceiling Brackets

The SonicWave 432e comes with a ceiling mounting bracket and screws. This section describes how to use the

mounting hardware to attach the SonicWave to the ceiling or an indoor wall.

Ceiling Bracket(1)

The underside of the orginal SonicWave 432e has two insertion points where you can insert the provided screws to

help secure the bracket. You can use these insertion points to attach the large bracket to the SonicWave 432e.

SonicWall SonicWave 432e

Safety and Regulatory Information

To attach the SonicWave 432e to a T-bar in the ceiling:

NOTE: Product may differ from illustrations.

1. Use the two provided screws to attach the mounting bracket(1) to the underside of the

SonicWave.

2. Supporting the SonicWave in one hand, position the edge clips of the bracket over the edge of the

ceiling T-bar.

3. Rotate the SonicWave counterclockwise (to the left when looking up at it) until the bracket is

securely attached to the T-bar.

To remove the original configuration SonicWave 432e from the ceiling t‐crossbar, gently pressing upward,

rotate it clockwise (to the right when looking up at it) until the bracket detaches from the crossbar.

SonicWall SonicWave 432e

Safety and Regulatory Information

Ceiling Bracket(2)

NOTE: Product may differ from illustrations.

This ceiling bracket(2) can be mounted on a ceiling (or wall) using either the four provided anchors and screws, or

clipped to a ceiling t‐crossbar for a less permanent solution. The underside of the later SonicWave 432e

configuration has two insertion points where you can hang the SonicWave by two plastic insertion stubs located on

the underside of the ceiling bracket. You can use these insertion stubs to attach the large bracket to the

SonicWave 432e after the bracket has been installed on the ceiling or wall.

Holes to secure bracket

SonicWall SonicWave 432e

Safety and Regulatory Information

To mount the SonicWave 432e to a t-crossbar between ceiling panels using bracket(2):

1Slide and click the bracket into place using the SonicWave’s two insertion points and the bracket stubs

located on the underside of the ceiling bracket to attach the bracket to the underside of the

SonicWave.

NOTE: Product may differ from illustrations.

2Supporting the SonicWave in one hand, position the edge clips of the bracket(2) over the edge of the

ceiling t‐crossbar and rotate the SonicWave counterclockwise (to the left when looking up at it) until

the bracket is securely attached to the crossbar.

To remove the SonicWave 432e from the ceiling t‐crossbar, gently pressing upward, rotate it

clockwise (to the right when looking up at it) until the bracket detaches from the crossbar.

SonicWall SonicWave 432e

Safety and Regulatory Information

Bracket(3)

The SonicWave 432e comes with a mounting bracket so it can be mounted on the ceiling or other flat surface. This

section describes how to attach the mounting bracket to the ceiling or an indoor wall. The mounting bracket provides

two pairs of T-bar locking tabs that support two ceiling T-bar widths: 15/16 inch and 9/16 inch. For mounting on a

flat surface, holes in the T-bar clips on the bracket provide insertion points for screws. Use #6 (3.5mm) zinc plated

pan head machine screws (sheet metal screws) of length 1.25 inches (31.75 mm). When mounting on drywall,

anchors should be used. Anchors must accommodate the screws and be rated to hold at least 10 lbs (4.5 kg).

Mounting Bracket(3) Top

Mounting Bracket(3) Bottom

SonicWall SonicWave 432e

Safety and Regulatory Information

To attach the mounting bracket(3) to the ceiling using T-bar clips:

1. Press the top side of the mounting bracket against the ceiling tile T-bar so that the T-bar locking

tabs on the mounting bracket are depressed.

2. T-bar clips on the mounting bracket and the T-bar locking tabs click into place.

To attach the SonicWave 432e to the mounting bracket

1Line up the two mounting bracket attachment slots on the bottom of the SonicWave 432e with the

mounting tabs on the mounting bracket.

2Insert the mounting tabs into the SonicWave 432e and slide the access point sideways until the locking

tab on the bracket clicks into place on the SonicWave.

NOTE: To detach the SonicWave from the bracket, press on the locking tab to

release it, then slide the SonicWave in the reverse direction to free the mounting

tabs.

SonicWall SonicWave 432e

Safety and Regulatory Information

Mounting Using Screws

To mount the SonicWave 432e using screws:

1Measure the distance between the two screw attachment points on the underside of the SonicWave.

2On the mounting surface, mark the locations for the two screw insertion points. The marks should be

horizontally parallel to each other.

3Drill starter holes at the marked locations. For a wood surface, use a drill bit that fits the screws. For

drywall, use a drill bit that fits the anchors.

4For drywall, screw in the anchors.

5Insert the screws into the wall or anchors, and screw them in deep enough to leave minimal space

between the screw heads and the wall surface.

6Supporting the SonicWave in your hands, securely fit the underside slots of the SonicWave onto the

screw heads.

SonicWall SonicWave 432e

Safety and Regulatory Information

To mount SonicWave 432e using anchor screws and bracket(2):

1On the mounting surface, mark the location to make four screw holes. The marks should match the

holes of the later configuration mounting bracket.

2Screw the anchor screws into the ceiling tile or drywall to their full depth.

3Align the bracket with the anchors. Insert the screws into the anchors through the bracket holes, and

then screw them in securely.

4Supporting the SonicWave in your hands, securely slide and click the SonicWave onto the bracket

stubs.

NOTE: Product may differ from illustrations.

SonicWall SonicWave 432e

Safety and Regulatory Information

To attach the mounting bracket(3) to the ceiling or to a wall using:T-bar clips:

1Place the top side of the mounting bracket against the ceiling or wall and mark the locations for the two

screw insertion points.

2Drill starter holes at the marked locations. For a wood wall, use a drill Drill starter holes at the marked

locations. For a wood wall, use a drill.Drill starter holes at the marked locations. For a wood wall, use a

drill bit that fits the screws. For drywall, use a drill bit that fits the anchors.

3For drywall, screw in the anchors.

4Place the mounting bracket against the wall with the holes lined up on the marks or anchors.

5Using the screws and a screwdriver, securely attach the mounting bracket to the ceiling or wall.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SonicWALL Punto di accesso wireless

SonicWALL

SonicWALL APL29-0B6 Manuale del proprietario

SonicWALL

SonicWALL SonicWave 224w Manuale del proprietario

SonicWALL

SonicWALL SonicWave 432o Manuale utente

SonicWALL

SonicWALL SOHO 250 Manuale del proprietario

SonicWALL

SonicWALL SonicWave 200 Series Guida di riferimento rapido

SonicWALL

SonicWALL SonicWave 681 Manuale utente

SonicWALL

SonicWALL SonicWave 231o Manuale del proprietario

SonicWALL

SonicWALL SonicWave 200 Series Guida di riferimento rapido

SonicWALL

SonicWALL SonicPoint Manuale utente

SonicWALL

SonicWALL SMA 100 Series Guida di riferimento rapido

SonicWALL

SonicWALL APL13-02C Manuale utente

SonicWALL

SonicWALL APL62-0F7 Manuale del proprietario

SonicWALL

SonicWALL SonicWave 200 Series Guida di riferimento rapido

SonicWALL

SonicWALL sonicpoint ACI Manuale utente

SonicWALL

SonicWALL SonicPoint ACe Manuale utente

SonicWALL

SonicWALL TZ300P Manuale del proprietario

SonicWALL

SonicWALL E-Class SonicPoint-Ne Manuale utente

SonicWALL

SonicWALL APL30-0B8 Manuale del proprietario

SonicWALL

SonicWALL SonicWave 432i Manuale del proprietario

SonicWALL

SonicWALL SonicWave 641 Manuale utente

SonicWALL

SonicWALL SonicPoint N2 Manuale utente

SonicWALL

SonicWALL SonicWave 432o Manuale utente

SonicWALL

SonicWALL SonicWave 200 Series Guida di riferimento rapido

SonicWALL

SonicWALL ex9000 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente