Sonoff RF Bridge Manuale utente
Sonoff RF Bridge
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –12
Čeština
13 –22
Slovenčina
23 –32
Magyar
33 –43
Deutsch
44 –53
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Operating Instruction
1. Download “eWeLink”APP
Android™ & iOS
2. Power on
After powering on, the device will enter the quick pairing mode (Touch) during the first
use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you
want to enter this mode, please long press the pairing button for about 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash and release.
5
3. Add Bridge
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
Compatible Pairing Mode
1 If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode” to
pair. Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
two short flashes and one long flash and release. Long press Pairing button for 5s again
until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing
Mode.
2 Tap “+” and select “Compatible Pairing Mode” on APP. Select Wi-Fi SSID with ITEAD-
****** and enter the password 12345678, and then go back to eWeLink APP and tap
“Next”. Be patient until pairing completes.
6
Add sub-devices
Tap "+" and select the remote controller type, then a "Beep" indicates that the device
enter quick pairing mode. Proceed to operate on the sub-device to pair and "Beep Beep"
indicates that the pairing is successful.
! Please refer to the user manual of the sub-device for pairing method.
! The device can add up to 16 sub-devices.
Specifications
Model
RF Bridge/RF BridgeR2
Input
5V 1A
RF
433.92MHz
Wi-Fi
IEEE 802.11 b/g/n 2.4GHz
Operating systems
Android & iOS
Working temperature
-10℃~40℃
Material
RF Bridge: ABS V0/RF BridgeR2: PC V0
Dimension
62x62x20mm
7
Product Introduction
! The device weight is less than 1 kg. The installation height of less than 2 m is
recommended.
LED indicator status instruction
LED indicator status
Status instruction
Blue LED flashes (one long and two short)
Quick Pairing Mode
Blue LED flashes quickly
Compatible Pairing Mode (AP)
Blue LED keeps on
Device is connected successfully
Blue LED flashes quickly once
Unable to discover the router
Blue LED flashes quickly twice
Connect to the router but fail to connect
to Wi-Fi
Blue LED flashes quickly three times
Upgrading
Red LED flashes quickly
Searching and adding ...
RF LED indicator (red)
Wi-Fi LED indicator (blue)
Input
Pairing Button
8
Features
This is a 433MHz RF bridge with multiple features that allows you to connect a variety of
433MHz wireless devices through switching 433MHz to Wi-Fi. You can set schedules,
countdowns, alarm notifications and more.
Remote Control
Single/Countdown Timing
Voice Control
Share Control
Sync Status
Alarm notification
Smart Scene
Camera Feature
9
Factory Reset
Long press the pairing button for about 5 s until the Wi-Fi LED indicator changes in a
cycle of two short and one long flash and release, then the reset is successful. The
device enters quick pairing mode (Touch).
Please reset the device to factory defaults if you want to change the Wi-Fi network, then
reconnect the new network.
Common Problems
Q: Why my device stays “Offline”?
A: The newly added device needs 1 –2mins to connect Wi-Fi and network. If it stays off-
line for a long time, please judge these problems by the blue Wi-Fi indicator status:
1. The blue Wi-Fi indicator quickly flashes once per second, which means that the switch
failed to connect your Wi-Fi:
①Maybe you have entered a wrong Wi-Fi password.
②Maybe there's too much distance between the switch your router or the environment
causes interference, consider getting close to the router. If failed, please add it again.
③The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless
network.
④Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile
datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quickly flashes twice per second, which means your device has
connected to Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means you
access an unsteady network, not a product problem. If thenetwork is normal, try to turn
off the power to restart the switch.
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
Altri manuali per RF Bridge
3
Indice
Lingue:
Altri manuali Sonoff Punto di accesso wireless
