Sony BKS-R6010 Manuale utente

INSTALLATION MANUAL

1st Edition (Revised 2)

Serial No. 10001 and Higher

UNIVERSAL LCD REMOTE PANEL

BKS-R6010

!WARNING

This manual is intended for qualified service personnel only.

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so. Refer all servicing to

qualified service personnel.

!WARNUNG

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

!AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin

de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les

réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.

Pour toute réparation faire appel à une personne compétente uniquement.

BKS-R6010 IM

WARNING

This unit has no power switch.

When installing the unit, incorporate a readily

accessible disconnect device in the fixed wiring, or

connect the power cord to a socket-outlet which must be

provided near the unit and easily accessible, so that the

user can turn off the power in case a fault should occur.

WARNUNG

Dieses Gerät hat keinen Netzschalter.

Beim Einbau des Geräts ist daher im Festkabel ein

leicht zugänglicher Unterbrecher einzufügen, oder das

Netzkabel mu

mit einer in der Nähe des Geräts

befindlichen, leicht zugänglichen Wandsteckdose

verbunden werden, damit sich bei einer

Funktionsstörung die Stromversorgung zum Gerät

jederzeit unterbrechen lä

Attention-when the product is installed in Rack:

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

make sure that the rack does not overload the supply

circuit.

2. Providing protective earth

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

confirm that the outlet is provided with a suitable

protective earth connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the

rack is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous

condition due to uneven mechanical loading.

5. Install the equipment while taking the operating

temperature of the equipment into consideration

For the operating temperature of the equipment, refer

to the specifications of the Operation Manual.

6. When performing the installation, keep the

following space away from walls in order to

obtain proper exhaust and radiation of heat.

Rear: 10 cm (4 inches) or more

For safety, do not connect the connector for peripheral

device wiring that might have excessive voltage to the

following port(s).

: NETWORK connector

Follow the instructions for the above port(s).

1 (P)

BKS-R6010 IM

Table of Contents

Manual Structure

Purpose of this manual ................................................................. 3

Related manuals ........................................................................... 3

Trademarks ................................................................................... 4

1. Installation

1-1. Installation Procedure ..................................................... 1-1

1-2. Operating Environment .................................................. 1-2

1-3. Power Supply ..................................................................1-2

1-3-1. Power Specifications ............................................. 1-2

1-3-2. Recommended Power Cord ................................... 1-2

1-4. Installation Space ............................................................ 1-3

1-5. Rack Mounting ............................................................... 1-4

1-6. For Use in an OB Van ....................................................1-4

1-7. Matching Connectors ......................................................1-4

1-8. Input and Output Signals of Connectors ......................... 1-5

1-9. Setting the On-Board Switches and Description

of LEDs ........................................................................... 1-6

1-10. How to Attach the Key Label ......................................... 1-8

1-11. Installing and Removing a Touch Plate .......................... 1-9

1-12. System Connection ....................................................... 1-10

1-12-1. S-BUS Data Link ................................................ 1-10

1-13. Setup Menu at Startup .................................................. 1-16

1-13-1. BKS-R6010 (V1.00 - V1.01) .............................. 1-16

1-13-2. BKS-R6010 (Ver. 2.00 or higher) ....................... 1-20

1-14. Setting Network Connection (IP Address) ...................1-36

1-14-1. Connection .......................................................... 1-36

1-14-2. Downloading the BZR-25 ................................... 1-36

1-14-3. Installing the BZR-25 .......................................... 1-36

1-14-4. Setting Security Software .................................... 1-37

1-15. Example of the Network Connection Settings .............. 1-40

1-16. Subnet Functions <BKS-R6010 (V2.10 or higher)> .... 1-48

1-16-1. Outline ................................................................. 1-48

1-17. Downloading the Font Data

<BKS-R6010 (Ver.2.00 or higher)> ............................. 1-53

2. Service Overview

2-1. Error Messages ............................................................... 2-1

2-2. Checking Equipment Status ............................................2-2

2-2-1. BKS-R6010 (V1.00 - V1.01) ................................ 2-2

2-2-2. BKS-R6010 (Ver. 2.00 or higher) ......................... 2-3

2-3. User Default <BKS-R6010 (Ver. 2.00 or higher)> ........ 2-7

2-4. Periodic Inspection ......................................................... 2-9

2-5. Lithium Battery ............................................................... 2-9

2-6. Data Backup .................................................................... 2-9

BKS-R6010 IM

Purpose of this manual

This manual is the installation manual of Universal LCD Remote Panel BKS-R6010.

This manual is intended for use by trained system and service engineers, and

deicribes the information on installing the BKS-R6010.

Related manuals

Besides this Installation Manual, the following manuals are prepared for the BKS-

R6010.

.Operation and Installation Guide (Supplied with the unit)

This manual describes the cautions on the operation of this unit and the setting of

station numbers.

.Operation Manual (Available on request)

This manual describes the detailed information on how to operate this unit.

The operation manual is stored as a PDF file in the CD-ROM supplied with the

IXS-6600-C/IXS-6700-C.

If this manual is required, please contact your local Sony Sales Office/Service

Center.

.System Setup Manual (Available on request)

This manual describes the routing switcher system setting and operation confirma-

tion.

The system setup manual is stored as a PDF file in the CD-ROM supplied with the

IXS-6600-C/IXS-6700-C.

If this manual is required, please contact your local Sony Sales Office/Service

Center.

.Maintenance Manual (Available on request)

This manual describes the information that premises the parts level service (parts

replacement, parts list, diagrams, etc.).

If this manual is required, please contact your local Sony Sales Office/Service

Center.

.Protocol Manual (Available on request)

This manual describes the protocol for controlling this unit.

The manual below is provided for the protocol that this unit can support.

If this manual is required, please contact your local Sony Sales Office/Service Center.

SONY ROUTING SWITCHER SYSTEM

REMOTE1 (S-BUS/ROT16) PROTOCOL and COMMAND SPECIFICATIONS

Part No.: 9-977-477-xx

SONY ROUTING SWITCHER SYSTEM

REMOTE2 (Cart++) PROTOCOL and COMMAND SPECIFICATIONS

Part No.: 9-967-261-2x

Manual Structure

4BKS-R6010 IM

Trademarks

Trademarks and registered trademarks used in this manual are follows.

.Ethernet is a registered trademark of Xerox Corporation.

.IBM and AT are registered trademarks of International Business Machines

Corporation.

.Windows is a registered trademark of Microsoft Corporation.

1-1

BKS-R6010 IM

Section 1

Installation

1-1. Installation Procedure

The following chart shows the procedure for installing the unit.

For details of the following chart, refer to the relevant section or related manual.

Start

Selection of installation

place

Rack mounting

Connection

1-2.

1-3.

1-4.

1-5.

1-7.

1-8.

1-12.

Operating Environment

Power Supply

Installation Space

Rack Mounting

Matching Connectors

Input and Output Signals of Connectors

System Connection

End

System Setup Manual

Initial setting 2

Operation check

Initial setting 1 1-13.

1-14.

Setup Menu at Startup

Setting Network Connection (IP Address)

1-2 BKS-R6010 IM

1-2. Operating Environment

Operating guaranteed temperature : +5dC to +40dC

Performance guaranteed temperature : +10dC to +35dC

Operating humidity : 10 % to 90 %

Storage temperature : _20dC to +60dC

Mass :

BKS-R6010 : Approx. 2.2 kg

To prevent overheating of the unit ensure that there is good

air circulation around the unit.

Select an installation place as operating temperature of the

unit is 5 dC to 40 dC. Do not place the unit near heart

sources.

1-3. Power Supply

1-3-1. Power Specifications

A switching regulator (+12 V) is used for the power

supply of this unit. A voltage within the range of AC 100

to 240 V can be used without changing the supply voltage.

Power requirements : AC 100 to 240 V

Power frequency : 50/60 Hz

Current consumption :

BKS-R6010 : 0.7 to 0.3 A

As the inrush current at turn-on is a maximum of 21 A (at

100 V) /40 A (at 240 V), the capacity of the AC power

must be commensurate with this source load.

If the capacity of the AC power is not adequately large, the

AC power source breaker will operate or the unit will

abnormally operate.

For customers in the U.S.A. and Canada

1Power cord, 125 V 10 A (2.4 m) : !1-551-812-31

AC inlet

For customers in the all European countries

1Power cord, 250 V 10 A (2.5 m) : !1-782-929-12

AC inlet

1-3-2. Recommended Power Cord

.Use the approved Power Cord (3-core mains lead)/

Appliance Connector/Plug with earthing-contacts that

conforms to the safety regulations of each country if

applicable.

.Use the Power Cord (3-core mains lead)/Appliance

Connector/Plug conforming to the proper ratings (Volt-

age, Ampere).

If you have questions on the use of the above Power Cord/

Appliance Connector/Plug, please contact your local Sony

Sales Office/Service Center.

.Never use an injured power cord.

.Plugging the power cord in the AC inlet, push as far as it

will go.

Altri manuali per BKS-R6010

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche