Sony MP-CL1 Guida di riferimento
MP-CL1 3-MP0-107-01
120
inches
80
inches
40
inches
3.45 m
1.15 m
2.3 m
Help guide
MP-CL1
© 2015 Sony Corporation
3-MP0-107-01
MP-CL1 3-MP0-107-01
Parts and controls
CAUTION
Do not point the laser light directly at eyes or people, nor look into it. Doing so may
cause serious injuries such as loss of eyesight.
Strap hole
Micro USB jack
Use an AC power adaptor with a 1.5 A or
greater output to charge this product.
(power) button
Press and hold the (power) button for
longer than 1 second to turn the power
on or off.
MP-CL1 3-MP0-107-01
Jog lever (−/ENTER/+)
Press the jog lever while at the ENTER position to display the menu. Slide it to +
or − to move to next or previous menu item, and then press while at the ENTER
position to select the highlighted item.
Speaker
Built-in Wi-Fi antenna
HDMI/MHL IN jack
AUDIO OUT jack
Connect headphones or speakers to this jack.
USB OUT jack (for power supply)
Connect another device to this jack to charge it. The lamp lights up in green
while charging the device.
Ventilation holes
(charge) lamp
(power) lamp
Lens
Laser radiates from this aperture.
MP-CL1 3-MP0-107-01
Adjusting the volume
Slide the Jog Lever to + or − while the menu is not displayed to adjust the volume.
Checking the remaining battery power
Press and quickly release the button (within 1 second). The lamp blinks in
orange, showing the battery status. The lamp blinks in one of the following patterns
according to the remaining battery power.
(Once): 0% to 30% remaining
(Twice): 30% to 70% remaining
(Three times): 70% to 100% remaining
MP-CL1 3-MP0-107-01
Using the menu
Navigating the menu
Learn how to navigate through the menu here.
1Press the jog lever while at the ENTER
position.
The menu is projected.
2Slide the jog lever to + or − to move to the next or previous menu item.
3Press the jog lever while at the ENTER position with the desired menu
item highlighted.
One of the following is displayed according to the selected menu item.
MP-CL1 3-MP0-107-01
Values to choose from
Slide the jog lever to + or − to move to the next or
previous value, and then press the lever while at the
ENTER position with the desired value highlighted.
Submenu
Slide the jog lever to + or − to move to the next or
previous submenu item, and then press the lever
while at the ENTER position with the desired item
highlighted. The adjustment bar or another screen is
displayed according to the selected item.
MP-CL1 3-MP0-107-01
Adjustment bar
Slide the jog lever to + or − to change the value
shown in the bar, and then press the lever while at
the ENTER position to confirm.
To exit the menu
Press and hold the jog lever for about 2 seconds while at the ENTER position.
MP-CL1 3-MP0-107-01
Description of the menu items
Close Exits the menu.
Input change Selects an input source from HDMI/MHL and screen mirroring
according to the connection method.
Keystone
Keystone
Preset 1/
Preset 2/
OFF
If the projected image is distorted and looks trapezoidal, select
[Keystone Preset 1] or [ Keystone Preset 2] to apply the
keystone adjustment. The default values of [ Keystone Preset 2]
is suitable for correcting distortion when using the 2 Way Stand
(supplied). The preset values can be customized by changing the
settings in [ V keystone] and/or [ H keystone] below.
V keystone Corrects vertical distortion. The
value set here overwrites the
selected preset value.
MP-CL1 3-MP0-107-01
H keystone Corrects horizontal distortion.
The value set here overwrites the
selected preset value.
Flip (left-right) Flips the image horizontally. Use
this mode for rear projection.
To flip the image back to normal,
select this menu again.
Picture setting
Contrast Adjusts the contrast of the projected image.
Hue Adjusts the color tones.
Saturation Adjusts the color intensity.
MP-CL1 3-MP0-107-01
Setup
Device
name
Displays the device name of this product. You can change the
name (up to 15 characters) by selecting the name field and using
the on-screen keyboard. Select [Save] to save the new name.
Sleep timer Turns this product off automatically after a set length of time up
to 150 minutes in increments of 30 minutes.
Optical
alignment
Adjusts the horizontal/vertical alignment of the color items. Try
this if the projected image is unclear.
Biphase
alignment
Adjusts the synchronization timing of input signals. Try this if the
projected image is flickering or blurred.
Factory
reset
Resets all setting values (except for the Optical and Biphase
alignment settings) to the factory default.
Altri manuali per MP-CL1
1
Indice
Altri manuali Sony Proiettore
Sony
Sony VPL-PS10 Manuale utente
Sony
Sony HDMI VPL-FH300L Manuale di servizio
Sony
Sony VPL-DX270 Manuale di servizio
Sony
Sony VPL-EX4 Manuale utente
Sony
Sony VPL-FH500L Manuale di servizio
Sony
Sony VPL-CX70 Manuale utente
Sony
Sony VPH-D50Q Manuale utente
Sony
Sony VPL-CX4 Manuale utente
Sony
Sony VPL-CX76 Manuale utente
Sony
Sony VPL-FHZ91L Manuale di servizio
Sony
Sony VPH-V20M Manuale utente
Sony
Sony VPL-AW10 (VPLAW10 and VPLAW15) Manuale utente
Sony
Sony HDMI VPL-EW7 Manuale di servizio
Sony
Sony VPL-FX51 Manuale utente
Sony
Sony VPL-HW45ES Istruzioni operative
Sony
Sony VPL-CX70 Manuale utente
Sony
Sony 338 Manuale utente
Sony
Sony VPL-FX50 Manuale utente
Sony
Sony VPL-FHZ55 Manuale utente
Sony
Sony VPL-HW50ES Manuale d'uso e manutenzione
