Sony UP-CX1 series Manuale utente
2-699-693-11 (1)
Printer Driver
(for Mac OS X)
Installation Guide
This guide describes installation and the use of the Printer
Drivers for Mac OS X.
Before using the printer driver, be sure to read the “ReadMe”
file located on the CD-ROM.
Before Using this Software
© 2006 Sony Corporation
UP-CX1 Series
2
Windows 2000
Table of Contents
Operation Environment Requirements ................3
About This Document ............................................3
Installing the Printer Driver .................................4
Before Installation ..............................................4
Installation Procedure .........................................4
Using More Than One Printer ..............................7
Installation Procedure .........................................7
Uninstalling the Printer Driver .............................9
Uninstallation Procedure ....................................9
Making Page Settings ..........................................10
Making Print Settings ..........................................11
Setting the Number of Copies ...........................11
Setting the Graphics Attributes .........................11
Checking the Print Settings ..............................12
Printing .............................................................12
Apple, Mac, Macintosh, and Mac OS are registered
trademarks of Apple Computer Inc. in the United States
of America and other countries.
Other company names and product names appearing in
this document are generally registered trademarks or
trademarks of their respective owners.
Operation Environment Requirements / About This Document 3
Windows 2000
Operation Environment
Requirements
The system requirements for use of the printer driver are
as follows.
• Operating system: Mac OS X 10.3 or later
• Computer: Macintosh computer running Mac OS X,
with USB port as standard equipment
• Memory: 128 MB or more
• Hard disk: At least 2 MB of free space at time of
installation
About USB 2.0
• The UP-CX1 series conforms to USB 2.0
specifications.
• USB 2.0 is fully backward compatible with USB 1.1.
• USB 2.0 supports conventional Full (low) speed and
Hi-Speed operation.
• In a USB 1.1 environment, connection and operation
at Full speed is possible. For Hi-Speed operation, the
following requirements must be met.
– Operating system
Mac OS X 10.3 or later
– Computer
Macintosh computer providing USB 2.0 port as
standard equipment
– Certified USB 2.0 cable
Note
The printer will not operate in a Mac OS X Classic
environment.
About This Document
The screen messages and other information shown in
this document assume connection of the UP-CX1. If
another printer model from the UP-CX1 series is
connected, read any occurrence of “UP-CX1” as the
model name of your printer.
The screen messages and other information shown in
this document assume the use of Mac OS X 10.4.x.
Actual messages may differ slightly depending on your
system and application software.
Installing the Printer Driver 4
Windows 2000
Installing the Printer
Driver
Before Installation
Connecting multiple printers
When several UP-CX1 series printers are connected to a
single computer, install the printer driver for the first
printer, according to the explanation in “Installation
Procedure.” Then connect the subsequent UP-CX1
series printers to the computer and refer to the section
“Using More Than One Printer.”
Installation Procedure
1
With the printer not yet connected to the computer,
turn power to the computer on.
2
Insert the supplied CD-ROM “PRINTER DRIVER
& INSTRUCTIONS FOR USE UP-CX1” into the
CD-ROM drive and double-click the [UP-
CX1Series] icon on the desktop. If you have
downloaded the driver from a web site, double-
click the downloaded file to mount it, and then
double-click the [UP-CX1Series] icon on the
desktop.
The following screen appears.
3
Double-click the [UP-CX1Series.pkg] icon.
The following installation screen appears.
4
Click [Continue].
The Software License Agreement screen appears.
5
Read the Software License Agreement and then
click [Continue].
The Software License Agreement acceptance sheet
appears.
Installing the Printer Driver 5
Windows 2000
6
To accept the Software License Agreement, click
[Agree].
The installation destination screen appears.
7
Select the boot disk as destination volume and click
[Continue].
The installation type screen appears.
8
Click [Install] or [Upgrade].
The Authenticate screen appears.
9
Enter the administrator [Name] and [Password],
and click [OK].
The restart confirmation sheet appears.
10
Click [Continue Installation].
The installation begins. When the procedure is
finished, the following restart message appears.
11
Click [Restart].
The computer restarts and the installation is
complete.
12
After the computer has restarted, connect the
printer to the computer using a USB cable, and turn
power to the printer on.
After a while, the printer will be automatically
recognized and available for use.
Installing the Printer Driver 6
Windows 2000
To verify that the printer is ready for use, bring up the
Printer List in the Printer Setup Utility. If the model
name of your UP-CX1 series printer is shown in the list,
the printer can be used.
To start the Printer Setup Utility, open [Applications] -
[Utilities] - [Printer Setup Utility].
Note
In Mac OS X 10.4.x, you can also check the Printer List
from [Print and Fax] under System Preferences.
If the printer is not recognized automatically, make the
setting manually as follows.
Using Mac OS X 10.4.x
1
Open [Applications] - [Utilities] - [Printer Setup
Utility].
The Printer List screen appears.
2
Click the [Add] button.
The Printer Browser screen appears.
You can also bring up the Printer Browser screen by
clicking the [+] button in [Print and Fax].
3
Select the printer with your printer name in [Printer
Name] and “USB” in [Connection].
4
For [Print Using], select “SONY UP-CX1 series
printer”, and click the [Add] button.
The printer is now available for use.
Using Mac OS X 10.3.x
1
Open [Applications] - [Utilities] - [Printer Setup
Utility].
The Printer List screen appears.
Using More Than One Printer 7
Windows 2000
2
Click the [Add] button.
The following screen appears.
3
In the popup menu, select [USB].
4
Select the printer with your printer name in
[Product] and “Sony” in [Type]. Select “SONY UP-
CX1 series printer” for [Printer Model]. Then click
the [Add] button.
The printer is now ready for use.
Using More Than One
Printer
Installation Procedure
If more than one UP-CX1 series printer is to be
connected to the computer, perform the installation
procedure for the second and subsequent printers as
described below.
The installation for the first printer must have been
completed correctly, as described in the preceding
section.
The explanation below applies for installing the second
printer.
Using Mac OS X 10.4.x
1
Connect to the computer the UP-CX1 series
printers for which installation has been completed.
If more than two UP-CX1 series printers have
already been installed, connect them all to the
computer.
2
Turn power to all connected printers on.
3
Open [Applications] - [Utilities] - [Printer Setup
Utility].
4
Verify that all connected UP-CX1 series printers
are shown in the Printer List.
Using More Than One Printer 8
Windows 2000
5
Connect the printer to be added to the computer,
and turn power to that printer on.
After a while, the connected printer will be
automatically recognized and added to the Printer
List.
When the printer is added to the list, the installation
is complete.
You can also check the Printer List from [Print and Fax]
under System Preferences.
Using Mac OS X 10.3.x
1
Connect to the computer the UP-CX1 series
printers for which installation has been completed.
If more than two UP-CX1 series printers have
already been installed, connect them all to the
computer.
2
Turn power to all connected printers on.
3
Open [Applications] - [Utilities] - [Printer Setup
Utility].
4
Verify that all connected UP-CX1 series printers
are shown in the Printer List.
If there is already a printer with the same name as
the printer to be added, change the name of the
existing printer. For example, if the new printer is
“UP-CX1” and there is already a “UP-CX1” in the
Printer List, change the name of that printer as
follows.
1Select the printer for which the name should be
changed in the Printer List, and click the [Show
Info] button.
2Enter the new name in the [Printer Name] field,
and click the [Apply Changes] button.
5
Connect the printer to be added to the computer,
and turn power to that printer on.
After a while, the connected printer will be
automatically recognized and added to the Printer
List.
When the printer is added to the list, the installation
is complete.
Uninstalling the Printer Driver 9
Windows 2000
Uninstalling the Printer
Driver
Uninstallation Procedure
To uninstall the printer driver, proceed as follows.
1
Shut down all running applications.
2
Turn power to all UP-CX1 series printers connected
to the computer off and disconnect the USB cables.
3
Open [Applications] - [Utilities] - [Printer Setup
Utility].
The Printer List screen appears.
4
Select the printer model that you want to uninstall
in the Printer List and click the [Delete] button.
Perform this operation for all printers of the same
type that you want to uninstall.
(In Mac OS X 10.4.x, you can also select the printer
in the Printer List of [Print and Fax] under System
Preferences and delete the printer by clicking the
[-] button.)
5
Open [Library] - [Receipts].
6
Move [UP-CX1Series.pkg] to the trash.
7
Open [Library] - [Printers] - [SONY] - [UP].
8
Move the files [UPCX1PM.plugin] and
[UPCX1PrintColorSetup.plugin] to the trash.
9
In the [Finder] menu, select [Empty Trash].
The printer driver is now uninstalled.
Making Page Settings 10
Windows 2000
Making Page Settings
Before printing from an application, you should make
the required page attribute settings.
Page attributes include the printer to use, the paper size,
the paper orientation, and scale settings.
1
From the [File] menu in the application, select Page
Setup.
The Page Attributes sheet appears.
2
Select the printer to use from the [Format for] list.
3
For [Paper Size], select either [UPC-C13], [UPC-
C14], [UPC-C15], or [UPC-C48PF], depending on
the paper size inserted in the printer.
If another setting is selected, printing will not be
possible.
The maximum print area size according to the
[Paper Size] setting is as follows.
4
Select the desired paper [Orientation] setting.
5
Select the desired [Scale] setting when wishing to
enlarge or reduce the image while printing.
When the settings have been made, click the [OK]
button.
Paper Size Maximum print area
UPC-C13 1,536 ×1,100 (pixels)
UPC-C14 1,848 ×1,248 (pixels)
UPC-C15 2,148 ×1,536 (pixels)
UPC-C48PF 2,448 ×1,248 (pixels)
Altri manuali per UP-CX1 series
2
Indice
Altri manuali Sony Software
Sony
Sony SonicStage Simple Burner Manuale utente
Sony
Sony Memory Stick Autorun Manuale utente
Sony
Sony MZ-N1 Manuale utente
Sony
Sony DCR-IP5 MovieShaker v3.1 Manuale utente
Sony
Sony MEX 1GP - Giga Panel Radio Manuale utente
Sony
Sony TDM-NC1 - Wi-fi Client For Streaming Music Manuale utente
Sony
Sony PEGA-GC10 Manuale utente
Sony
Sony MZ-DH10P Hi-MD Music Transfer Version 1 for Mac (User... Manuale utente
Sony
Sony CLIE PEG-TJ37 Manuale utente
Sony
Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... Manuale di istruzioni
Sony
Sony VRD-MC1 Nero 6 Manuale utente
Sony
Sony BDP-BX57 - Blu-ray Disc™ Player Manuale tecnico
Sony
Sony CLIE World Alarm Clock Manuale utente
Sony
Sony ICD-SX46 - Ic Recorder Manuale utente
Sony
Sony DSC-F55 Manuale utente
Sony
Sony CLIE Manuale utente
Sony
Sony Walkman D-NE319 Guida alla risoluzione dei problemi
Sony
Sony DVP-NW50 - In-wall Dvd Player Manuale utente
Sony
Sony VGF-AP1L - Vaio Pocket Digital Music Player Guida alla risoluzione dei problemi
Sony
Sony PEG-NZ90 Read This First Manuale utente
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente