Sony LBT-V8900AV Manuale utente
©1998 by Sony Corporation
Operating Instructions
3-864-160-11(1)
Compact Hi-Fi
Stereo System
LBT-V8900AV
2
This system can
play the following
discs:
VIDEO CDs Audio CDs
Disc logo
Contents Audio + Video Audio
(moving pictures)
Disc size 12 cm/8 cm 12 cm/8 cm
Play time 74 min./20 min. 74 min./20 min.
Note on VIDEO CDs
This system conforms to VIDEO CDs without PBC*
functions (Ver. 1.1) and VIDEO CDs with PBC*
functions (Ver. 2.0) of VIDEO CD standards. You
can enjoy two kinds of playback according to the
disc type.
Disc type You can
VIDEO CDs without Enjoy video playback
PBC functions (moving pictures) as
(Ver. 1.1 discs) well as audio CDs.
VIDEO CDs with Play interactive
PBC functions software using menu
(Ver. 2.0 discs) screens displayed on
the TV screen (menu
playback), in addition
to the video playback
function of VIDEO
CDs without PBC
functions.
Moreover, you can
play high or standard
quality still picture.
* PBC = PlayBack Control
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This stereo system is equipped with the Dolby Pro
Logic Surround system* and the Dolby B-type noise
reduction system.
* Manufactured under license from Dolby
Laboratories Licensing Corporation.
DOLBY, the double-D symbol aand “PRO
LOGIC” are trademarks of Dolby Laboratories
Licensing Corporation.
This appliance is
classified as a CLASS 1
LASER product. The
CLASS 1 LASER
PRODUCT MARKING
is located on the rear
exterior.
3
ES
F
P
Table of Contents
Getting Started
Step 1: Hooking up the system ............ 4
Step 2: Setting up the speakers ............ 7
Step 3: Setting the time ....................... 10
Step 4: Presetting radio stations ........ 11
Connecting optional AV
components .................................... 12
Basic Operations
Playing a VIDEO CD ........................... 14
Playing a CD ......................................... 16
Recording a CD/VIDEO CD .............. 18
Listening to the radio ........................... 19
Recording from the radio .................... 20
Playing a tape........................................ 21
Recording from a tape ......................... 23
Singing along: Karaoke ....................... 24
The VIDEO CD/CD Player
Playing a VIDEO CD with PBC
functions (Ver 2.0) ......................... 26
Using the CD display........................... 27
Using the on-screen display ............... 28
Locating a specific part of a disc ........ 30
Playing a VIDEO CD from where it was
last stopped ..................................... 35
Reducing distortion of the picture with
advanced DNR ............................... 36
Setting the sharpness ........................... 37
Adding trails to moving pictures....... 37
Playing CD tracks repeatedly ............. 38
Playing CD tracks in random order .. 38
Programming CD tracks ..................... 39
Playing CDs without interruption ..... 41
The Tape Deck
Recording on a tape manually ........... 42
Recording CDs by specifying the track
order ................................................ 43
DJ Mix
Looping part of a CD ........................... 45
Flashing part of a CD ........................... 45
Waving the equalizer ........................... 46
Sound Adjustment
Adjusting the sound ............................ 47
Selecting the audio emphasis ............. 48
Adjusting the audio emphasis............ 49
Making a personal audio emphasis
file .................................................... 51
Enjoying Dolby Pro Logic Surround
sound ............................................... 52
Other Features
Mixing and recording sounds ............ 53
Falling asleep to music ........................ 54
Waking up to music ............................. 54
Timer-recording radio programs ....... 56
Additional Information
Precautions ............................................ 57
Troubleshooting ................................... 58
Specifications ........................................ 60
Glossary ................................................. 63
Index........................................ Back cover
4
Step 1: Hooking up the system
Follow steps 1through 7to hook up your system using the supplied cords and accessories.
Getting Started
Right front speaker
AM loop antenna
FM antenna
Left rear surround
speaker
Right rear surround
speaker
Center surround speaker
To the
video
input
Left front speaker
5
1Connect the speakers.
1 Connecting the front speakers
Connect the speaker cords to FRONT
SPEAKER jacks of the same color.
2 Connecting the center surround
speaker
Connect the speaker cords to the
SURROUND SPEAKER CENTER
jacks.
3 Connecting the rear surround
speakers
Connect the speaker cords to the
SURROUND SPEAKER REAR jacks.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Insert only the stripped portion of the cord.
Inserting the vinyl portion will interfere with the
speaker connection and no sound will come from
the speaker.
2Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
AM loop antenna
Extend the FM wire
antenna horizontally.
FM75
AM
continued
VIDEO OUT
S VIDEO OUT
3Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video connecting cable.
When using a TV
Turn on the TV and select the video input so you
can view the pictures from this system.
Tip
For even higher quality video images, you can use
an optional S VIDEO cord to connect the S VIDEO
input jack on your TV to the S VIDEO OUT jack.
4Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
SYSTEM SELECT
NTSC PALAUTO
Black (’)Red (‘)
+
_
L
R
Gray with black stripe (’)Gray (‘)
+
_
L
R
CENTER
REAR
+
_
Gray with black stripe (’)
Gray (‘)
_
+
_
L
R
CENTER
REAR
+
6
To attach the center surround
speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center surround
speaker.
Inserting two size AA (R6)
batteries into the remote
Step 1: Hooking up the system
(continued)
If your TV automatically changes the color
system according to the input signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD. If you turn off the system, the
color system will be set to NTSC
automatically when you turn on the system
again.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Picture recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Picture recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Note
Be sure to turn off the system before changing the
SYSTEM SELECT setting.
5Set VOLTAGE SELECTOR to the
position of your local power line
voltage (except for Chinese model).
6Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the plug on this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (except for Chinese
model).
7Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
Using the remote
You can use the shaded buttons shown below
to operate Sony TV.
220-240V
VOLTAGE SELECTOR
110-120V
TV POWER
TV VOL +/–
TV CH +/–
TV/VIDEO
7
continued
To Press on the remote
Turn the TV on or TV POWER.
off
Switch the TV’s TV/VIDEO.
video input
Change the TV TV CH +/–.
channels
Adjusts the volume TV VOL +/–.
of the TV speaker(s)
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1Press FUNCTION repeatedly until “CD”
appears in the display.
2Hold down PLAY MODE and press 1/uto
turn off the system.
Step 2: Setting up
the speakers
By connecting the supplied speakers, you can
enjoy Dolby Pro Logic Surround sound.
Dolby Pro Logic Surround is a decoding
system standardized in TV programs and
movies. Dolby Pro Logic Surround improves
the sound image by using four separate
channels. These channels manipulate the
sound to enhance the action as it happens on
the screen.
Since the center surround speaker cannot
produce enough bass, the bass sound of the
center channel is output from the front
speakers.
Front
speaker (L) Front
speaker (R)
Center surround
speaker
Rear surround
speaker (R)
Rear surround
speaker (L)
8
Step 2: Setting up the speakers
(continued)
Positioning the speakers
Before you connect them, determine the best
location for your speakers.
1Place the front speakers at an angle
of 45 degrees from your listening
position.
2Place the center surround speaker so
it is placed at about the same height
as the front speakers (A). Align the
center surround speaker with the
front speakers or place it a little
behind the front speakers’ position
(B).
3Place the rear surround speakers
facing each other at about 60 to 90
cm above your listening position.
Rear surround
speaker
60 to 90 cm
Front
speaker
(L)
Front
speaker
(R)
Center surround
speaker
Rear surround
speaker (L) Rear surround
speaker (R)
45
Center surround
speaker
B
A
9
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker using the
test tone that the system provides.
1Press PRO LOGIC (or PRO LOGIC
ON/OFF on the remote).
The indicator on this button lights up.
2Press T. TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
nFront (left) nCenter
Rear NFront (right) N
3From your listening position, press
CENTER LEVEL +/– and REAR
LEVEL +/– on the remote to adjust
the volume levels.
The volume levels from each speaker
should be the same.
4Press T. TONE ON/OFF when you
are done adjusting.
The test tone is turned off.
Tip
If you turn VOLUME (or press VOL +/– on the
remote), all the speaker volumes change.
1VOLUME
1/u
(Power)
1
3
2,4
VOL +/–
10
Step 3: Setting the
time
3,51 2,4
You must set the time before using the timer
functions.
1Press t/CLOCK SET.
The hour indication flashes.
2Press TUNING +/– to set the hour.
The clock uses the 12-hour system.
3Press ENTER/NEXT.
The minutes indication flashes.
4Press TUNING +/– to set the
minutes.
5Press ENTER/NEXT.
The clock starts.
Tips
• If you make a mistake, start over from step 1.
• To change the time while the power is on, do the
following:
1Press t/CLOCK SET.
2Press TUNING +/– to select “SET CLOCK.”
3Press ENTER/NEXT.
4Perform steps 2 through 5 above.
Indice
Altri manuali Sony Impianto stereo
Sony
Sony HCD-GX25 - System Components Manuale utente
Sony
Sony CMT-PX333 Manuale utente
Sony
Sony HMC-NX5MD Manuale utente
Sony
Sony LBT-ZTX7 - Compact Hi-fi Stereo System Manuale utente
Sony
Sony CMT-MX500i Manuale utente
Sony
Sony ZS-2000 Primary Manuale utente
Sony
Sony MHC-GX750 Manuale utente
Sony
Sony HCD-DP900P Manuale utente
Sony
Sony CMT-SE5 Manuale utente
Sony
Sony mhc-gzr88d Manuale utente
Sony
Sony SRS-BTX500 Guida utente
Sony
Sony CMT-SE7 Manuale utente
Sony
Sony LBT-XB44KS Manuale utente
Sony
Sony GTK-XB72 Manuale utente
Sony
Sony SRS-ZR5 Manuale utente
Sony
Sony ICF-C11iP Manuale utente
Sony
Sony HCD-GN800 Manuale utente
Sony
Sony SRS-X55 Guida utente
Sony
Sony HCD-RG121 Manuale utente
Sony
Sony HCD-A490 Manuale utente
