Cartridge tracking force adjustment
4-a Ensure that the tracking force adjustment knob is set to the
zero position.
4-b With the cartridge permanently tted in the correct position,
adjust the counterweight so that the arm is oating with the stylus
approximately 3–5mm above a vinyl record. (This adjustment
should be made with the anti-skating knob to zero.)
4-c Rotate the counterweight and move it forward. Each
graduation is equivalent to 0.25 grams tracking force.
* The applied range of weight of headshell with cartridge is from
15grams - 32grams (TA-1). And 15grams - 35(TA-1L).
For TA-1L,maximum total weight is 55 grams with option "325"
weight.
Anti-Skating (bias) adjustment
5-a Set the bias adjustment knob to the same number as the
required tracking force.
Headshell Azimuth Adjustment
6-a Sorane tonearms come with azimuth adjustable headshells.
There is an Allen or hex set-screw in the side of the headshell.
There is a corresponding Hex Key to allow the user to adjust the
headshell.
6-b As shipped from the factory, the headshell adjustment Hex
set-screw is set to approximately 90 degrees, with the intention
that customers should adjust the headshell to match their unique
setup (cartridge, plinth, platter, etc.). Customers are requested
to make final adjustments after mounting the cartridge, then
installing the headshell on your Sorane tonearm. It is important to
make sure the stylus is perpendicular to the surface of the record.
Often it is helpful to use a mirror (if you do not have a mirror, a CD
will also work). The main thing is to understand that many stylus
assemblies are not perfectly perpendicular, and sometimes platters
are concave, so that it is important to adjust the stylus until it is
perpendicular with the groove.
Thank you for choosing Sorane! As IT Industry values the
customer, and strives to oer the best performance, we are sure
you will enjoy many hours of clear and dynamic sound.
Happy listening!
