Spatz SWITCH-4X2 Manuale utente

SWITCH-4X2

4 Input switch with 2 simultanous

outputs

Operation Manual

SWITCH-4X2

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. SPATZ assumes no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

SPATZ assumes no responsibility for any inaccuracies that may be

contained in this document. SPATZ also makes

no commitment to update or to keep current the information

contained in this document.

SPATZ reserves the right to make improvements to this

document and/or product at any time and without notice.

Notice

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer

file,

in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

SPATZ.

January 2011

Trademark

Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety

Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

Always follow basic safety precautions to reduce the risk of

fire,

electrical shock and injury to persons.

To prevent

fire

or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

Never spill liquid of any kind on or into this product.

Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

Do not attach the power supply cabling to building surfaces.

Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

RDV1 20110103 Preliminary Release

Table of Contents

1. Introduction.................................................................................. 1

2. Applications................................................................................. 1

3. Package Contents ...................................................................... 1

4. System Requirements.................................................................. 1

5. Features ........................................................................................ 2

6. Specifications .............................................................................. 2

7. Operation Controls and Functions............................................. 3

7.1 Front Panel...................................................................... 3

7.2 Rear Panel ...................................................................... 4

8. Remote Control............................................................................ 5

9. RS-232 Protocol............................................................................ 5

9.1 Pin Definition................................................................... 5

9.2 Command ...................................................................... 5

10. Connection and Installation ........................................................ 6

1. Introduction

This is a high performance four input & two outputs switcher.

The output ports support Audio Return Channel (ARC) and HDMI Ethernet

Channel (HEC) according to HDMI v1.4

specification.

The SWITCH-4X2 provides

a S/PDIF link from the sink to feed an AV receiver to get digital audio from the

sink decoder. The most typical application for this is a TV with built in Satellite

receiver that decodes digital audio and forwards the SPDIF signal through the

HDMI cable to the SWITCH-4X2 instead of running an additional SPDIF

connection wire.

Another HDMI 1.4 feature is the HEC that adds a connection to the HDMI

link that is capable of carrying the same data as a full duplex, 100Mbps

Ethernet connection. Connection a Fast speed HDMI cable with Ethernet allows

convenient integration of Digital Televisions (DTVs) into the end user’s home

network system. Simply connect the network cable to the SWITCH-4X2 and make

your TV part of the IP network through the HDMI cable.

2. Applications

•Simultaneously display one HDMI source on 2 TVs

•Professional audio display

•Showroom display

•Education demo

•Commercial usage

3. Package Contents

•4 x 2 HDMI Switcher with HEAC

•5V/2.6A DC power supply adaptor

•Operation Manual

4. System Requirements

•Source equipments with HDMI output connector(s)

•Displays TV/monitor with HDMI input connector(s)

•Two output ports can be connect to the Ethernet Channel (HEC) of Digital

Televisions (DTVs) from end user’s home network system and Audio Return

Channel (ARC) can output to the AVR to get true audio from the sink.

5. Features

•Automatic input selection for active source

•Both outputs ports support Ethernet Channel (HEC) and Audio Return

Channel (ARC) according to HDMI v1.4

specification

•HDMI 1.4 support:

√ Audio Return Channel (ARC)

√ 3D

√ CEC 1.4

√ HDMI Ethernet Channel (HEC), enabling high-speed, bi-directional

networking at up to 100Mb/sec

•HDCP repeater support

•Deep Color support 36/30/24-bit, 1080p@60Hz

•EDID fowarding selectable from Standard or Learned from Output 1

•Audio support:

√ HDMI 1.4 compatible audio interface

√ Dolby TrueHD

√ DTS-HD Master Audio

6. Specifications

Frequency Bandwidth 2.25Gbps (single link)

Input Ports 4x HDMI (Female type)

Output Ports 2 x HDMI (Female type)

2 x Ethernet

2 x ARC

Output Resolution 480i ~1080p 50/60, 1080p24, VGA~UXGA

ESD Protection Human Body model: ±8kV (air-gap discharge)

± 4kV (contact discharge)

Dimensions (mm) (W) x (D) x (H)

Weight(g)

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0°C ~ 40°C/ 32°F ~104°F

Storage Temperature -20°C ~ 60°C/ -4°F ~140°F

Relative Humidity 20~90% RH (non-condensing)

Power Consumption 4.1W

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Front Panel

. IR Remote Control Sensor.

. Audio/3D content indicator: The system will automatically detect

incoming audio/video signal and the Green LEDs will illuminate

accordingly.

. Input selection: Press input button to select input source, the Blue LED will

illuminate accordingly.

. EDID selection: This EDID control button is determining if the SWITCH-4X2 is

forwarding the EDID from the display attached to output 1 or use the

preprogrammed EDID. The STD or TV Green LED will illuminate

accordingly. When press EDID button longer then 3 seconds, the RED LED

will illuminate which means the EDID has been locked to STD or TV EDID as

selected previously.

. Power LED Indicator: The LED will illuminate when the power is

connected.

7.2 Rear Panel

. RS-232: This slot is for RS-232 control signal and for service only.

. The Audio return and Ehternet connectors are part of the new HDMI 1.4

features. Both outputs have their own individual audio return and Ethernet

channel. To make these outputs work the TV connected to the HDMI OUT 1

and 2 have to support HDMI 1.4 and the cable must be of the Fast Speed

with Ethernet type.

Typically the digital audio outputs are used to feed an AV receiver that is

located at the SWITCH-4X2 location receiving the decoded audio signal

from the TV through the HDMI cable. No additional audio return wire is

necessary.

The Ethernet port serves a similar purpose, you may connect your IP

connection to the SWITCH-4X2 and supply a network connection through

the HDMI cable to your TVs.

One HDMI cable can carry HD Video to your TV, receive the decoded

audio and pass IP network signals in both directions !

. HDMI input 1~4: Connect these to HDMI or DVI source equipment such

as DVD player or set-top-box.

. Power: Plug the DC 5V power supply into the sSWITCH-4X2 and

connect the adaptor to AC wall outlet.

8. Remote Control

①Power button: Press to switch On the device,

press it again to set the device in standby mode.

②1~4: Press the number button to select the

input source.

9. RS-232 Protocol

9.1 Pin Definition

SWITCH-4X2

Remote Control Console

Definition

►

◄

Definition

GND

Baud Rate: 9600bps

Data bit: 8bits

Parity: None

Stop bit: 1 bit

Flow Control: None

9.2 Command

Command

Action

POWER 00

Power Off (standby)

POWER 01

Power On

PORT 11

Output Select Input 1

PORT 12

Output Select Input 2

PORT 13

Output Select Input 3

PORT 14

Output Select Input 4

PORT 21

Output Select Input 1

PORT 22

Output Select Input 2

PORT 23

Output Select Input 3

PORT 24

Output Select Input 4

10. Connection and Installation

Indice

Altri manuali Spatz Interruttore

Spatz

Spatz PROSWITCH-8 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente