Specac ARROW Manuale di istruzioni

ARROW™ QUICK START MANUAL

QS-10880-1 1

Quest Preparation

Sample Loading

To avoid damage to your quest and spectrometer samples should be loaded away from the spectrometer.

Liquids

Solids

Sample Measurement

Background Spectrum Collection

Install Quest into

your IR

spectrometer

(Consult Quest

manual for further

details). If present

remove existing

puck.

Fit Arrow Puck to

Quest.

Pipette liquid into

sample well. Silicon

MUST be completely

covered.

(Optional) sample cap

can be fitted to

suppress spillage and

reduce evaporation.

Pipette solution/dispersion into

sample well. Crystal MUST be

completely covered.

Dissolve/disperse

solid sample in

solvent.

Allow solvent to

evaporate fully.

Record a background

spectrum.

Remove bank slide.

Insert blank slide into Quest

puck.

ARROW™ QUICK START MANUAL

QS-10880-1 2

Sample Spectrum Collection

Tips and Tricks

These terms apply to and form part of the terms of use and any contract between Specac Limited and any purchaser of Arrow and when issued shall supersede

any other terms. Specac Limited shall not be liable for any for any defects appearing in an Arrow sold or supplied by Specac Limited to the extent that such

defects arise as a result of the purchaser or any user modifying or tampering with the goods or failing to operate Arrow in accordance with instructions issued

by Specac Limited from time to time in relation to installation, operation, storage or maintenance. All warranties other than those expressly given by Specac

Limited in its conditions of sale, or which are implied and may not be excluded by virtue of an applicable statute or regulation shall be excluded to the fullest

extent permitted by law.

Record a sample

spectrum.

Remove sample slide.

Insert sample slide into

Quest puck.



Do NOT apply a load to

the slide.

Do NOT overfill the sample well.

For easy insertion into the puck grasp slide

by edges rather than top/bottom.