Speco O2P30 Manuale utente

V1.0

MODEL

O2P30

Please read this manual carefully before operating the unit and retain it for future reference.

OWNER’S MANUAL

O2P30

Full HD Indoor/Outdoor PTZ IP Camera

Contents

Introduction................................................................................... 3

Operation and settings ................................................................. 4

Before using the system .....................................................................4

Recommended PC Requirements...................................................4

Accessing the unit.................................................................................5

Web Viewer Overview .........................................................................6

Conguration menu overview..........................................9

Conguring the Device.......................................................................9

Accessing the Conguration menu.................................9

System settings....................................................................10

Audio & Video settings...................................................... 15

Network settings.................................................................27

User settings .........................................................................34

Event settings.......................................................................36

Reference ..................................................................................... 42

Troubleshooting.................................................................................42

Specications.......................................................................................46

Introduction 3

This Speco IP Camera is designed for use on an Ethernet network and must be assigned an IP address to make it accessible.

This manual contains instructions on how to install and manage the Speco IP Camera in your networking environment. Some knowledge of

networking environments is recommended.

Should you require any technical assistance, please contact Speco Technologies Technical Support.

Introduction

4Operation and settings

Operation and settings

Before using the system

• Before using the device make sure the connections are correct

and verify that proper power supply is used.

• Check the connections of the device for the correct conditions.

• Check that the device is connected to the network and that

power is supplied.

• Once the connections are made you need to IP Scanner utility

from the PC that you wish to use.

• To view streaming video in Internet Explorer, set your browser

to allow ActiveX controls. If you find this message “This website

wants to install the following add-on: ‘IPCam_Streamer.cab’ from

‘Speco Technologies’, Click ‘allow’ to enable live video in the web

viewer.

Recommended PC Requirements

The Speco IP device can be used with most standard operating

systems and browsers.

Items Requirements

Operating System Windows XP Professional,

Windows Vista, Windows 7

CPU Intel Core2 Quad Q6700 (2.66 GHz) or

above

Web Browser Microsoft Internet Explorer (32 bit) 7/8/9

DirectX DirectX 9.0c(Windows XP),

DirectX 11(Windows Vista/7) or above

Memory 2 GB or above RAM

Graphics Card 256 MB or above Video RAM

Resolution 2048 x 1536 (with 32 bit color) or higher

Operation and settings 5

Accessing the unit

You can access the Speco IP device by following the below steps.

1. Launch IP Scanner

2. Discover the Speco IP device

IP Scanner can automatically discover and display Speco IP

devices on your network.

IP Scanner shows the MAC address, IP address, and Model

Name of the device.

Note:

The computer running IP Scanner must be on the same

network segment (physical subnet) as the Speco IP device.

2.1 After a few seconds of launching the utility, the

Speco IP device will show up in the window.

3. Logging in to the Web Viewer

3.1 Run IP Scanner and locate the Speco IP device.

3.2 When IP devices appear in the window, double-click

IP address to open up the browser and start the

web viewer. When accessing the web viewer, the

authentication dialog appears on the screen.

3.3 Enter the user name and password. (Note that the

default administrator user name and password are

“admin” and “1234”, respectively.)

Note:

It is highly recommended to change the default

password after initial connection for security

purposes.

3.4 Click the [OK] button and then the web viewer is

displayed in your browser.

Note:

• You can also access the web viewer as shown below.

3.1 Start your Web browser.

3.2 Enter the IP address of the device in the address bar

of the browser.

3.3 Enter the user name and password set by the

administrator.

• If the login window is not displayed, check the pop-up

blocker. If you set the pop-up blocker, the login window

is not displayed. You must allow pop-ups.

• If you connect to the web viewer for the first time, it

may prompt you to install the ActiveX control, which is

required to show live video.

• If you have trouble connecting to the device or getting a

video stream, check to see if your computer or network

is protected by a proxy of firewall.

6Operation and settings

Web Viewer Overview

Item Description

Select the video image size from the

drop-down list.

Note:

• Select [FULL SCREEN] to enable

full screen view. To return previous

screen, press ESC key or double click.

• When you select [AUTO RESIZE], size

of live view screen will be revised to

fit the window.

Displays Video Codec, Resolution and FPS

of the selected video stream.

Network connection type (TCP or UDP). If

checked, the client connects to the server

using TCP connection.

Select buffering time of live stream.

Click to display the check box of

[Hostname], [Framerate] and [Bitrate]

options.

Video Analysis

> Hide: Video Analysis display

function is not in use.

> MD: Displays the Motion

Detection function in the live

view window.

Note:

When you use the DPTZ function,

all of the Display functions are

deactivated.

Operation and settings 7

Click to expand and then check the [Edge

Enhancement] option. The user gets a

more sharp reception on the live view

window.

Note:

This feature only affects the live view

window.

Click to save the current image in JPEG

format on your computer.

1. Click the [Snapshot] button and then

the Snapshot window is displayed.

2. Click the [Save] button in the

Snapshot window.

3. Enter the file name (JPEG format) and

select the folder to save it.

4. Click the [Save] button to confirm it.

5. Click the [Cancel] button in the

Snapshot window to close it.

Displays the PTZ control window. Use

these buttons to control the PTZ unit.

This button is not displayed with normal

or anonymous user.

Select the video stream. From the Live

view drop-down list, select the desired

video image source.

Note:

You can set the stream configurations

independently.

Provides all the necessary tools

for setting up the device to your

requirements. The user will need

administrator level to do this.

Note:

If you want to exit the Setup menu, select

the Live button.

Displays the current surveillance live

screen.

Click this button and drag the area to use

the digital PTZ function. Right-clicking

on the screen will bring up the previous

magnification.

(Color icon: On, Gray scale icon: Off.)

8Operation and settings

1. Click this button to open the folder

browse window for local recording

on the PC. After the folder selection,

video is recorded automatically

without selection of the folder when

the button is clicked again.

Note:

If you want to change the folder,

move to other pages or press the

refresh button.

2. Recording button is activated and

recording will be started.

Note:

If recording exceed 1 hour or 1 GB

of storage, recording is stopped

automatically with warning.

3. To stop the recording, click this

button during the recording.

Click this button to connect or

disconnect the audio communication

between the IP device and the

connected PC.

(Color icon: On, Gray scale icon: Off.)

Click this button to switch the

microphone off and on for the computer.

(Color icon: On, Gray scale icon: Off.)

Click this button to switch the sound off

and on, for the speaker of the computer.

(Color icon: On, Gray scale icon: Off.)

Operation and settings 9

Conguration menu overview

The following table shows the list of menu items.

The configuration images are different from each model.

Main Menu Sub Menu Note

Audio & Video

Basic Setup

Video Setup

Audio Setup

PTZ Config

Preset Setup

Auto Tracking

Network Setup

Basic Setup

IP Address Setup

Multicast

IP Filtering

SNMP

QoS

802.1x

SIP

User Admin User Setup

Event Setup

Email & FTP Setup

Sensor & Relay

Motion Detection

Triggered Event

Scheduled Event

System

Current Version

Time Setup

Upgrade & Reset

Storage

Status Report

Conguring the Speco IP Camera Device

The features and options of the Speco IP device are configured

through the Setup menu.

Only administrator-level users have permission to access the Setup

menu.

Accessing the Conguration menu

Click the [Setup] button to display the Web Viewer configuration

window.

Warning

The Configuration setup should be made by qualified service

personnel or system installers.

10 Operation and settings

System settings

Current Version

Displays the current Model Name and Software version.

Time Setup

Time zone

Set the time difference from GMT in the area where the IP device

is installed. Select the time zone in the area where the IP device is

installed from the drop down list.

Time setup

> Synchronize with an Internet Time Server: Select if you want

to synchronize the IP device’s date and time with an NTP

(Network Time Protocol) server. Specify the NTP server’s

name. Click the [Test] button for connection test to the

server.

> Synchronize with computer: Select if you want to

synchronize the IP device’s date and time with your

computer.

> Set manually: Select if you want to set the IP device’s date

and time manually. Select the year, month and date by

clicking the calendar button. Set hour, minutes and seconds

in the edit boxes.

Note:

• When system reboots after time setting, time of

the system could be delayed a little. To set the time

accurately, use the NTP option.

Server time

> Server time: Displays the current date and time of the IP

device.

• Save: Click this button to confirm the settings.

Indice

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente