Speco CLPR67B4B Manuale utente

Altri manuali Speco Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

CLPR67B4B

Installation Precautions

1. Avoid installing camera where there are frequent vibrations or shocks.

2. Please keep the glass in front of the camera clean. Do not touch it directly.

Use a soft cloth with alcohol to wipe glass if necessary.

3. The available IR range of this camera is shown in the specification.

Please be sure to place the camera within the specified range.

4. In order to prevent damage to the camera, please do not loosen any screws or

covers unless modifying settings.

5. Please do not operate camera beyond conditions listed in the specification.

Use 12V DC regulated power supply to avoid damaging camera.

Included Accessories

1. User Manual x1

2. Screws x4

3. Anchors x4

4. Adaptor x1

5. Hex shape Wrench x2

6. DC Connector x1

7. Mounting template x1

Specifications

ITEM

CLPR67B4B

IP Rating

IP66

Type

Monochrome

Signal System

NTSC/PAL

Pick Up Device

1/3" Sony High Resolution CCD

Picture Elements

NTSC: 811H×508V; PAL: 795H×596V

Resolution

550 TV Lines

LEDs

20 Super High Power LEDs

Vertical Frequency

NTSC: 60Hz; PAL: 50Hz

Horizontal Frequency

NTSC: 15.734KHz; PAL: 15.625KHz

Clock Frequency

NTSC: 28.636MHz; PAL: 28.375MHz

Scanning System

2:1 Interlace

S/N Ratio

≥50dB

Lens

10-40mm Varifocal Auto Iris IR Lens

Video Output

1Vp-p,75Ω

Power Supply

DC12V ± 10%

Current Consumption

1300mA (Max)

Recommended IR Range

16.3ft –98.3ft (5m –30m)

Dimension

18.23” × 9.45” × 5.51”(463 × 240 × 140mm)

Weight

88.2oz (2500g)

Storage Temperature

-22～140°F (-30～60°C)

Operating Temperature

-22～104°F (-30～40°C)

We reserve the right to modify product design and specification without notice and without incurring any obligation

License Plate Camera

Changing IR Settings

If you want to change the IR settings, please remove the rear cover.

There are two Resistors with phillips head knobs, refer to the picture below.

Resistor A: Controls the intensity of the IR LEDs

Turning (Clockwise) will increase intensity

Turning (Counter-Clockwise) will decrease intensity

Resistor B: Controls the lux threshold needed for triggering the IR LEDs

Turning (Clockwise) will increase lux threshold

Turning (Counter-Clockwise) will decrease lux threshold

Lens Adjustment:

Refer to the diagram below for optimum viewing angle.

①Use the hex shape Wrench to loosen the two screws on the left side

of camera housing, then you can open the sun shield.

②Remove the foam covering the box camera, and move forward the

box camera into the hole of IR board.

③Adjust the lens till the image is perfect, and then tighten the two

screws on the plastic plate.

④Re-screw the sun-shield.