Spectra Geospatial SP90m Manuale utente

P/N 113837, Rev B

SP90m

Getting Started Guide

Four Simple Steps to Get Started

This guide provides an overview of the important features and instruc-

tions for how to set up and operate the Spectra SP90m GNSS receiver.

1. Unpack and check the contents.

2. Get the receiver ready for use.

3. Turn on the receiver.

4. Run the built-in Web Server or Spectra Survey Pro field software to

use and control the receiver.

Additional Information

For further details regarding the features and operation of the receiver,

and to access the latest information, including the Spectra SP90m

GNSS Receiver User Guide and Release Notes, go to:

https://spectrageospatial.com/sp90m-gnss-receiver/

Spectra SP90m Support

For Spectra SP90m support, go to:

https://spectrageospatial.com/sp90m-gnss-receiver/

For safety information, refer to the SP90m GNSS Receiver User Guide.

Step 1: Unpacking and Checking Contents

* Country specific power cord to be ordered separately.

Number Description Number Description

[1] SP90m GNSS receiver [6] Li-Ion battery

[2] Transport case [7] Helical SMA 2.4 Bluetooth/WiFi antenna

[3] GNSS antenna+coaxial

cable [8] OTG Cable, USB A to Mini USB B

[4] Dual Li-Ion battery charger

and two spacers [9] SAE-to-DC adapter cable, 0.15 m

[5]*

AC/DC power supply, 65 W,

19 V, 3.43 A, 100-240 V AC

(without power cord)

[10]

7P Lemo-to-SAE power cable, 0.6 m, or

Power/Data cable, 1.5 m, DB9-f to OS/

7P/M to SAE + 5” whip antenna (TNC)

for 410-470 MHz radio if receiver model

includes internal radio.

[11] Tape measure, 3.6 m (12 feet)

[1]

[2]

[4]

[5]*

[6]

[7]

[8]

[9]

[3]

[11]

[10]

Front Panel

Rear Panel

Number Description Number Description

[1] External Bluetooth/WiFi antenna [5] Power LED

[2] Power button [6] USB OTG mini connector

[3] Display screen [7] Escape button

[4] Keypad including four direction keys

and a central OK key [8] Bumpers

Number Description Number Description

[8] Bumpers [13] DC Power input and serial port A (RS232)

[9] GNSS input #1 [14] Ethernet connector

[10] GNSS input #2 [15] RS232 serial port F + PPS output

[11] External GSM

antenna (option) [16] Earth terminal

[12] UHF radio connector [17] Switchable RS232/RS422 serial data port B

(RS232 by default) + External Event input

[1]

[6] [7] [8][8]

[2] [5] [3] [4]

[9]

[13] [17][16][14] [15]

[10] [11] [12]

[8] [8]

Step 2: Get the Receiver Ready for Use

Charging the Lithium-Ion battery: The rechargeable Lithium-ion

battery is supplied partially charged. Before using the battery for the

first time, charge it completely using the dual-battery charger pro-

vided. The battery comes with charge battery indicator LEDs. Push the

button on the battery to check the battery charge status.

Charging takes approximately 3 hours at room temperature.

Warning: Ensure that nothing obstructs the vents in the back and bot-

tom of the charger and that the charger is placed on a hard, flat and

level surface, to ensure that there is airflow under the charger. Do not

operate the battery charger while it is in the transport case.

LED Status Indicator: Beside each slot are two LED indicators (red

and green) to display the battery status:

Status Red Green

No battery detected

(no battery present or battery defect) On Off

Battery detected (charging not started yet)

- Conditioning not required

- Conditioning required

Off

Blinking

Off

Charging in progress

- Conditioning not required

- Conditioning required

- Over/under temperature (charge is inhibited)

Off

Blinking

One flash every 25 s

Off

Blinking

Conditioning in progress On Blinking

Conditioning done (battery fully charged) On On

Battery fully charged

- Conditioning not required

- Conditioning required

Off

Blinking

Power supply over/under voltage Off One flash every 25 s

The battery may be used as power source when the receiver is used in

field operations, or as backup to the external DC source when used

indoors.

Inserting the SIM Card and Battery: Open the battery door by

releasing the quarter-turn wing nut (turn anti-clockwise) and then by

lifting the battery door. The SIM card should be inserted first before

inserting the battery (see below). The battery should first be inserted

into the back of the battery door. Then you can close and lock the bat-

tery door.

Connecting the GNSS Antenna, External Power Source and

Bluetooth/WiFi Antenna: Connect the GNSS antenna to GNSS input

#1 (item [9] on rear panel; see page 3). Use the coaxial cable provided

to make this connection. Use the AC/DC power supply, the SAE-to-DC

adapter and the power cord to apply external power to the receiver.

AC/DC Power Supply

Power Line

SAE-to-DC Adapter

Coaxial cable

GNSS Antenna

Power Cord

Bluetooth/WiFi

Antenna

Step 3: Turning on the Receiver

• To turn on the receiver, press the Power button for about two sec-

onds until the power LED (item [5] on front panel; see page 3) turns

solid green, then release the button. The receiver will automatically

complete its initialization phase before it starts operating.

• To turn off the receiver, press the same Power button for about two

seconds. The Power LED will blink green until the receiver turns off.

General Status Screen: This screen is displayed by default after the

receiver has initialized.

Number Description Number Description

[1] Anti-theft and/or startup protection or

alarms [8] External DC source being

used

[2] Number of satellites received [9] Modem status

[3]

Position solution status for antenna

#1, or “BASE” if receiver used as a

base

[10] WiFi status

[4] Number of satellites used [11] Ethernet status

[5] Corrections being received (with age of

corrections) or sent (if a base) [12] Bluetooth/Radio/WiFi sta-

tus

[6] Data recording indicator [13] WiFi access point status

[7] Battery status

[1] [2] [3] [4]

[5] [6]

[1] [2] [3] [4]

[12][7] [8] [10][11][9] [12][7] [8] [10][11][9]

[5] [6]

[13]

Using the Front Panel Screen: See flowchart below.

: Used to scroll through the different screens. Also used to

switch from a digit to another when you are editing a numerical value.

: When a function is displayed, used to scroll through the pos-

sible options, if any. Also used to enter numerical values.

: Used to enter the edit mode (for those functions that have one) or

to validate a selected parameter.

Ethernet

Display

Settings

Radio*

GSM**

General

Status

WiFi**

2 sec.

Receiver Mode

Record

Advanced

Settings

Language

Unit

Screen orientation

Screen timeout

Buzzer

ATL Recording

Reset conguration?

Upgrade rmware?

Execute script?

(Startup protection if active)

Anti-theft

Battery charging

GNSS

Position

(Position 2)

(Heading)

OFF

Settings:

- Channel/Freq

- Protocol/Link speed

- Sensitivity

- FEC

- Scrambler

- Transmit power

- Repeater mode

- Repeater number

- Repeater delay

OFF

Settings:

- Power mode

- Pin code

- Antenna selection

OFF

Settings:

- Power mode

- WiFi mode

Client status

AP status

Start Recording:

• Static (Mem)

• Stop & Go (Mem)

• Static (USB)

• Stop & Go (USB)

Stop Recording:

• Yes

• No

Antenna:

- Antenna name

- Antenna height

Ref. Position:

- Position type

- Ref. Position

Base Settings:

- ID

- Output data:

• Port

• Data

Memory Status:

• Delete all G-les?

• Delete all les?

• Format?

(USB key status)

Site Name

Session #1

Session #2

*: Skipped if no

radio installed

**: Skipped if relevant

rmware option

not active

Rover

Base

Internal Radio

• Settings of ext. radio, if any

• Connection to Radio Utility

• Ext. radio settings:

- Port

- Baud rate

- Radio type

OFF

Settings:

- DHCP mode

- Static address

Error

Messages,

if any

Welcome

OK OK

: Used to go up to the “parent” screen, when applicable. A long

press on this button will take you back to the General Status screen.

Step 4: Controlling and Using the Receiver

Using the Built-in Web Server

Use any WiFi-capable device (computer, field controller, smart phone)

on which you can run a web browser.

• Browse through the different functions on the SP90m front panel

until you access the WiFi screen.

• Turn on WiFi, choose Access Point as the operating mode. Back to

the root WiFi screen, you will see the static (and fixed) IP address of

the access point: 192.168.130.1.

• On your computer, scan for

WiFi and take all the steps

to establish a WiFi connec-

tion with the SP90m

(Default WiFi key=

Receiver serial number).

• Run a web browser on your

computer and type

192.168.130.1. This starts the Web Server.

Please refer to the Web Server’s On-line context-sensitive Help to

learn how to use the Web Server.

Using Spectra Survey Pro Field Software

Coaxial cable

GNSS Antenna

Bluetooth/WiFi

Antenna

Powered from Internal Battery

Data Controller

running

Survey Pro

Bluetooth

Indice

Altri manuali Spectra Geospatial Ricevitore

Spectra Geospatial

Spectra Geospatial SP85 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente