SPEED LEADER DVX402 Manuale utente

User Manual

DVX402

Seamless Switch

SHENZHEN SPEEDLEADER TECHNOLOGY

Page 1 of 55

About the Manual

Without the written permission of the company, it is forbidden for any company or

individual to imitate, copy, or transcribe part or all of the contents of the manual. It is not

allowed to have the commodity publicity or achieve any commercial or profit-seeking

purpose in any form (electronic form, mechanical form, photocopying form, recording

form, or other possible ways).

Please carefully read this manual before using this equipment. All the product

specifications and information mentioned in the manual are only for reference. If there is

the content updating, the company will not make further notice. Unless there is a special

agreement, this manual is only taken as an instruction, and all statements and information

will not constitute a guarantee of any kind.

Brand Royalty

VGA and XGA are the registered trademarks of IBM Corporation.

VESA is a trademark of the Video Electronics Standards Association.

The logo of HDMI and High-Definition Multimedia Interface are the trademark of HDMI

Licensing LLC.

Safety Instructions

This symbol prompts the user that there are the important operation and

maintenance instructions in theuser manual.

Page 2 of 55

This symbol warns theuser that there is the hazardous voltage exposed inside

the equipment and there is an electric shock hazard.

This equipment must be connected with ground wire.

This equipment needs a rated power voltage. Ensure that the input voltage error

should be between - 10% and +10%.

Do not connect AC power cord with another AC power cord which may lead to

excessive noise.

Please use the equipment when the surrounding temperature is from -10 ℃to 45 ℃,

and the relative humidity is 90% or less than that.

Do not use this equipment in certain special circumstances, such as, closing to a heat

source, which may cause overheating of the equipment and damage it. Please use it

in a well-ventilated place and pay attention not to block the equipment vents.

Do not expose this equipment in the place which has the possibility for accidental

collision or vibration, and reinforcement processing is necessary in the vibration

place.

When you use the equipment, please make sure that there are no objects, such as

water and metal objects, inside the equipment. Otherwise, it will damage the

equipment and cause a fire.

If there is any irregularity or abnormality for the equipment, please immediately turn

off the power supply, disconnect the AC power cord, and see “Trouble Clearing”.

If this equipment is damaged, do not disassemble it. Please contact our maintenance

service department.

Page 3 of 55

Contents

Overview....................................................................................................................... 5

Application.................................................................................................................... 6

Installation .................................................................................................................... 7

Install DVX402..................................................................................................... 7

Rear Panel............................................................................................................. 8

Operation Interface...................................................................................................... 11

Menu System................................................................................................................ 15

Menu System Overview ...................................................................................... 15

Main Menu System ............................................................................................. 17

Automatic Menu ................................................................................................. 18

Input Menu......................................................................................................... 19

Output Menu....................................................................................................... 21

Special Effects Menu…………………..………………………………...………...22

Layer Menu ........................................................................................................ 24

Logo Menu......................................................................................................... 29

Preview Menu..................................................................................................... 30

System Menu...................................................................................................... 31

Operation .................................................................................................................... 33

Factory Reset Operation...................................................................................... 33

Output Resolution setting.................................................................................... 34

Signal Input ........................................................................................................ 34

Switch ................................................................................................................ 36

Set Fade Time and Preview Switching Mode........................................................ 36

Layer Operation.................................................................................................. 37

AddingLayer………………………………………………………………………37

DeleteLayer……………………………………………………………… ………38

Layer Priority…………………………………………………………………….. 38

Window Size and Position …………………………………………………………38

Crop Size and Position of Picture ……………………………………….….…38

Page 4 of 55

Contrast………………………………………………………………………………......44

Save and Recall of the Preset............................................................................... 45

Transfer of the Preset………………………………………………………..….…46

Logo capture and Transfer………………………………………………………..47

Logo or Black Field Transfer…………………………………………………..….50

Specifications…………………………………………………………………………....52

Page 5 of 55

Overview

DVX402 integrates 4 channel independent image processing engine, which can

perfectly achieve seamless switching and high-definition image analysis conversion. It has

the function of preview edition, program output, switching transition, LOGO capture and

insertion and screen freezing, which can also realize variety of advanced functions

required in a high-end presentation environment.

DVX402 has a 4-channel fully configurable input, which can access 16 channels of

video input, including 4-channel DVI, 4-channel VGA, 4-channel VID and 4-channel

3G-SDI (optional), and each channel can receive SD or HD video signals.

DVX402 has 2-channel output, the main channel of which is the liveprogram output,

and thevice channel of which is preview output. Program and preview output interface has

two DVI and one VGA, with the highest resolution up to 1920 x 1200 @ 60Hz or 2048 x

1152 @ 60Hz.

More Operating Layers: DVX402 has four layers, and a single output channel can

output three layers at most. Each layer has an independent parameter setting, and theuser

can edit the position, size, color, LOGO of each layer. It has real-time save function that

means it can restore the state before shutdown automatically after power failure.

Perfect Seamless Transitions Effects: DVX402 is built-in high-performance image

resolution converter, which can receive more-channel video signal, including 4-channel

3G-SDI signal (optional), and can have fade switch among any signal source. The

switching time can be adjusted from 0 to 5 seconds.

DVX402 has rich controllable functions, which is very suitable for the company

conference room, auditorium, church or other on-site activities. All the settings and

operations can be done by the front keys and RS-232/IP Link.

Page 6 of 55

Application

Figure 1-1 shows a typical application of DVX402. DVX402 receives a variety of

signal and resolution input, supporting the video input from the low resolution to high

resolution as follows:

VGA (XGA, WUXGA)

DVI (Compatible HDMI 1.3)

Composite Video (NTSC, PAL, SECAM)

SD/HD/3G-SDI video (optional)

Figure 1-1 Application of DVX402

Page 7 of 55

DVX402 has rich input and output interfaces, which can switch in VGA and DVI

signal of desktop computer, laptop, SDI (optional) signal of high-definition camera, and

DV and DVD video signal. Both the outputs of preview and program have two DVI

interface and a VGA interface, which can meet the various needs of users.

DVX402 has two-channel outputs, one channel can be connected to preview display;

and theother channel can be connected to the projector or LED video wall. After editing

images after the preview display, the user can follow the switch or exchange the switch

to thevideo wall. If the user needs to connect the LED video wall, it can be connected to

LED video processor, and then output it to the LED video wall. Program output of

DVX402 can also be connected to the LED video processor or LED video splicing

processor, and the switch does not need to zoom the image and the DVI output of the

program is directly connected to the video processor. If necessary, the user can use the

software or the console to have full control on DVX402.

Installation

Install DVX402

The user can choose whether to install DVX402 to rack or flight case. DVX402 is a

standard 2U chassis, with the size of 8.8cm (Height) x 44cm (Width) x 33.5CM (Depth).

While installing, please avoid scratching the case and use cushion for fixing suspension

loop.

Page 8 of 55

Figure 2-1 Install DVX402

Rear Panel

Figure 2-2 Connection Terminals of DVX402 Rear Panel

①# 1 ~ #4 Channel Video Input

It can receive a 4-channel video at the same time, and each channel can receive VGA,

DVI, HDMI (DVI terminal), VID (CVBS) and SDI (optional). DVX402 offers a number

Page 9 of 55

of input interfaces which can connect 16-channel video. After a one-time access, the user

can quickly switch video source without reconnection.

The following are the corresponding terminals for the input interfaces:

DVI input - DVI-D VGA input - DB15

SDI input (optional) - BNC VID input - BNC

Figure 2-3 DVX402 Channel # 1 Input Interface

②③ Communication Interface

②TCP / IP interface, using RJ-45 terminal, is reserved for the communication interface.

③RS-232 interface, using DB9 terminal if it is connected by computer’s RS-232 or

console, resolution adjustment, channel selection and seamless switch to DVX402 can be

operated by it.

④Preview Video Output Interface

Preview output is normally connected to the preview display. There are two video

output interface in the preview channel, and has two DVI-I seats, of which DVI / VGA

interface canoutput DVI and VGA signal. When using VGA output, DVI-VGA adapter

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente