Splash Atlantis R10 Manuale utente
R10 1st Stage
Service Manual
PATRIOT AS103
PATRIOT 1ST STAGE
Balanced Regulator 1ST STAGE
• Maximum working pressure 3500psi (232 bar)
• Low pressure port swivel assembly for versatile positioning
• Intermediate pressure output balanced piston
• 135-145PSI
• Four 3/8-24 UNF-2B intermediate pressure ports
• Two 7/16-20 UNF-2B high pressure port
• Chromium plated brass body
• Stainless steel springs
• Yoke or DIN
SPECIFICATIONS
PINNACLE AS-103
AIR FLOW 33 cu. ft. (935 liters/min). @ 1 atmosphere
INHALATION RESISTANCE 0.9” -2.0” (2.3 - 5.08 cm) w.c. @ 1 atmosphere
EXHALATION RESISTANCE 0.6” (1.52 cm) w.c. max. @ 1 atm.
RECOMMENDED LUBRICANT LTI Christo-Lube 111®
PINNACLE FIRST STAGE REGULATOR
TYPE balanced Piston Regulator - swivel
WEIGHT 2.1 lb.(.95 kg)
INTERSTAGE PRESSURE 135-145 psi (9.4-10 bar)
@ 3000 psi inlet (207 bar)
# LOW PRESSURE PORTS 4 (3/8”-24 UNF)
# HIGH PRESSURE PORTS 1 (7/16”-20 UNF)
MATERIALS Body -------- CDA-360 Brass
O-rings ----- Buna-N
Seat --------- TEFLON
ANNUAL SERVICE
REPLACEMENT PARTS:
790482
PATRIOT 1ST STAGE
Balanced Piston Regulator 1ST STAGE
‧ Maximum working pressure 3500psi(232 bar)
‧ Low pressure port swivel assembly for
versatil e positioning
‧ Intermediate pressure output balanced piston
135-145PSI
‧ Four 3/8-24 UNF-2B intermediate pressure ports
‧ Two 7/16-20 UNF-2B high pressure ports
‧ Chromium plated brass body
‧ Stainless steel springs
‧ YOKE OR DIN
BALANCE PISTON 1ST STAGE REGULATOR PART LIST
NO ITEM NO DESCRIPTION Q'TY
1 0111 YOKE KNOB 1
2 0055 YOKE 1
3 0133 YOKE RETAINER 1
4 0113 FILTER 1
5 2-011-02 O-RING 1
6 0118 DUST CAP 1
7 0132 SADDLE 1
8 0261 MAIN HOUSING 1
9 2-010-02 O-RING 1
10 0131-02 WASHER - THINER 1
11 0135 MAIN SPRING 1
12 0131-02 WAHSER - THICKER 1
13 0136 PISTON 1
14 2-022-01 O-RING 1
15 0137 SWIVEL RETAINER 1
16 0143 SWIVEL WASHER 1
17 0262 CAP 1
18 2-019-01 O-RING 1
19 0139 LP PORT SWIVEL 1
20 3-903-01 O-RING 3
21 0109 LP PLUG 3
22 3-904-01 O-RING 2
23 0108 HP PLUG 2
24 0264 STYLE CAP 1
25 2-014-02 O-RING 1
26 0140 HP SEAT 1
27 0141 HP SEAT CAP 1
28 0114 DIN HOUSING 1
29 0116 DIN WHEEL KNOB 1
30 2-012-02 O-RING 1
31 0115 DIN RETAINER 1
32 2-112-02 O-RING 1
33 2-019-01 O-RING 1 DIN ONLY
SERVICE KIT LIST 790482
NO PART NO DESCRIPTION Q'TY
9 2-010-02 O - RING 1 PISTON/BODY
14 2-022-01 O - RING 1 PISTON TOP
18 2-019-01 O - RING 1 CAP/LP PORT SWIVEL
20 3-903-01 O - RING 3 LP PORT OR ATLANTIS LP HOSE
22 3-904-01 O - RING 2 HP PORT OR ATLANTIS HP HOSE
25 2-014-02 O - RING 1 HP SEAT
26 0140 HP SEAT 1 STYLE SEAT /HP SEAT CAP
30 2-012-02 O - RING 1 DIN RETAINER INTERNAL
32 2-112-02 O - RING 1 DIN RETAINER EXTERNAL
33 2-019-01 O - RING 1 STYLE CAP / HP SEAT CAP
4 0113 FILTER 1
5 2-011-02 FILTER O-RING 1 FILTER
Torque Specications:
Description Item # Torque
Cap 16 120-140 in/lbs (13.56-15.82 N.M)
DIN HOUSING 21 16-18 ft/lb (21.70-24.41 N.M)
YOKE RETAINER 3 23-25 ft/lb (31.19-33.90 N.M)
DIN RETAINER 24 120-130 In/lb (13.56-14.69 N.M)
Port Plugs 18,20 35-40 In/lbs (3.96-4.52 N.M)
Hose inlet end 2-3 ft/lb (3-4 Nm)
Hose outlet end 2-3 ft/lb (3-4 Nm)
SERVICE PROCEDURES FOR THE AS-103
Before you begin disassembly of the regulator, test the rst and second stages for output
pressures and leakage. Pre-testing in this way will help the technician to pinpoint any specic
problems requiring repair.
SERVICE PROCEDURES FOR THE AS-103
The work area must be clean and well lit, with clean compressed air available to blow sand
and dirt from parts.
PATRIOT 1ST STAGE ANNUAL SERVICE KIT
HANDLE BAR
6" & 8" ADJUSTABLE WRENCH HOSE
4MM HEX BIT SOCKET ALLEN KEY = PORT PLUGS
PIN SPANNER RING SPANNER = CAP
1/4" HEX BIT SOCKET ALLEN KEY = HP SEAT RETAINER
8MM HEX BIT SOCKET ALLEN KEY = SWIVEL SEAT RETAINER
1.7MM DRILL BIT = SEAT
PISTON BULLET
1" HEX SOCKET
TORSION BAR
SOCKET WRENCH
TORQUE WRENCH 035 NM
INTERMEDIATE PRESSURE TESTING GAUGE
SILICONE GREASE
CHRISTO LUBE
0'RING PICKS
SOAPY SPRAY
YOKE ASSEMBLY
}
Indice
Altri manuali Splash Registratore di dati
