Splicecom PCS 10 Manuale di istruzioni
12
SpliceCom PCS 10
Operating Instructions & User Guide
3C933001-SP A9330-24_2.p65 27/10/2004, 9:1512
General Note: When power is switched on or batteries are inserted the display will
be blank until the Handset is lifted or the Handsfree button is pressed.
Figure One
1
Contents
INTRODUCTION......................................................................................................................3
INTENDED USE........................................................................................................................4
SAFETY......................................................................................................................................5
INSTALLATION........................................................................................................................6
TELEPHONE FEATURES........................................................................................................7
OPERATING INSTRUCTIONS..............................................................................................10
DISPLAY ..................................................................................................................................16
SETTING THE CLOCK..........................................................................................................17
MEMORY FUNCTION............................................................................................................18
DIRECTORY............................................................................................................................18
Programming Directory memory.............................................................................................18
Dialling a Directory memory ..................................................................................................19
To delete a Directory memory .................................................................................................19
DIRECT ACCESS MEMORY .................................................................................................19
Programming Direct Access memory buttons ..........................................................................20
Dialling Direct Access memory buttons...................................................................................21
Pre-programmed Direct Access memory buttons .....................................................................21
CALLS MEMORY...................................................................................................................22
2
DISPLAYING CALLS RECEIVED.........................................................................................22
To store a Call memory to Directory Memory..........................................................................22
To store a Call Memory to Direct Access memory....................................................................23
Deleting the Calls memory......................................................................................................23
REDIAL MEMORY .................................................................................................................24
Viewing the Redial memories..................................................................................................24
SERVICE..................................................................................................................................25
HEARING AID COMPATIBLE...............................................................................................25
WARRANTY TERMS & SERVICE/RETURNS PROCEDURE............................................25
3
Introduction
The SpliceCom PCS 10 telephone has been designed for use with the SpliceCom
maximiser business telephone system.
The telephone is able to show caller display information provided that this option
has been switched on by your installer.
When a call is received at the telephone, it will display the number of the person
calling you (there are some exceptions to this like withheld numbers). This
information is stored together with information about the time/date of the call and
whether you answered the call or not. Information on the last 80 calls is retained in
the telephone memory and it is possible to scan through these calls and dial
someone back by simply pressing one button.
There is an independent directory for you to store the telephone numbers and
names of 100 entries. If one of your directory “Names” calls you, then the display
will show not only the number calling you but the name, as stored in your directory
or the maximiser business telephone system memory.
As well as a directory of numbers it is possible to store up to 10 names and
numbers using ten two-touch memory buttons.
It is also possible to use this telephone in combination with a headset. There is a
universal interface in the telephone which will allow connection of most headsets,
providing that they have an RJ11 plug for connection to the headset socket
situated at the back of the telephone.
4
Intended Use
The SpliceCom PCS 10 telephone supports Touch-Tone Dialling (DTMF) only.
The telephone has been designed for use with the SpliceCom maximiser
business telephone system.
Declaration of Conformity
SpliceCom declares that this product SpliceCom PCS 10 is in conformity
with the following harmonised standards.
Health & Safety EN60950
Electromagnetic Compatibility EN55022 : 1998 & EN55024 : 1998
Telecom EN301437 : 1999 & TBR38 : 1998
Following the provisions of Council Directive on radio equipment and
telecommunications terminal equipment.
October 2004
5
Safety
When using your telephone equipment, the following safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to persons.
Read and understand all instructions. Follow all warnings and instructions marked
on the telephone. This telephone can be hazardous if immersed in water.
If you suspect a natural gas leak, report it immediately, but use a telephone away
from the area in question.
Never push objects of any kind into the equipment through housing slots. To
reduce the risk of electric shock, do not disassemble this telephone. There are no
user serviceable parts.
Avoid using the telephone during thunderstorms in your immediate area.
6
Installation
Please refer to Figure One at the front of this user guide
25 DC 9V This telephone requires either a power supply or batteries in order
to operate correctly. When using the adaptor, it should be
connected to the socket at the rear of the telephone.
23 Alternatively, the telephone will operate utilizing 3 AA batteries (not
provided). To insert the batteries, first ensure that the telephone is
disconnected from the telephone line.
22 This jack is used to connect a line cord to your telephone.
24 The handset cord plugs in here.
20 A headset plugs in here.
21 The jack labelled is used to connect a device such as a modem to
your Telephone.
18 A 3-position switch is used to control the volume of the ring tone.
Select from loud ring, quiet ring or ringer off.
19 Turn the pitch control to adjust the pitch of the ringer.
17 Wall mounting - An additional wall bracket is required - Using the
template supplied with the bracket, position where you want to fix
your telephone. Drill two holes and fix roundhead screws. Attach
the telephone to the bracket. Slide the bracket into place on the
screws. Remove the handset retainer by pushing up out of the slot.
Turn the retainer through 180° and place back in its slot.
Wall brackets can be obtained from your distributor.
Indice
Altri manuali Splicecom Telefono IP
Splicecom
Splicecom PCS 570/G Manuale utente
Splicecom
Splicecom PCS 560 Manuale utente
Splicecom
Splicecom PCS 520 Manuale utente
Splicecom
Splicecom Yealink CP920 Manuale utente
Splicecom
Splicecom PCS 580G Manuale utente
Splicecom
Splicecom IP 530 Manuale utente
Splicecom
Splicecom PCS 410 Manuale utente
Splicecom
Splicecom PCS 582GX Manuale utente
Splicecom
Splicecom PCS 552 Manuale utente
Splicecom
Splicecom Yealink T57W Manuale utente
Splicecom
Splicecom PCS 580 Manuale utente
Splicecom
Splicecom IP 530 Manuale utente
Splicecom
Splicecom PCS 100 Manuale utente
Splicecom
Splicecom PCS 520 Manuale utente
Splicecom
Splicecom PCS 570 Manuale utente
Splicecom
Splicecom PCS 563 Manuale utente
Splicecom
Splicecom PCS 582G Manuale di installazione e funzionamento
