SPORTident 5349 Manuale utente
3
(3) Search for available Bluetooth devices. The printer
answers with "SPORTident Printer 0xxxx". The serial
number of your printer "0xxxx" is noted on the
packaging.
(4) Connect the printer to the phone.
Bluetooth PIN is 5349
5. Hardware Interfaces
(1) The printer has a serial port (COM) and a micro-USB
port in addition to the port for the charging plug. You
need the COM interface to connect the SPORTident
Printout Station BS7-P to the printer. The connection
cable is available from SPORTident on request.
(2) Contact us at support@sportident.com if you want to
connect the printer to the computer.
(3) Always make sure that you are using the correct port.
Incorrect use of the ports can result in serious errors in
the computer.
6. Troubleshooting
In case of any problems please email
support@sportident.com
QUICK START GUIDE
SPORTident Printer
Bluetooth PIN is 5349
Use the printer with the
SPORTident Orienteering App
available in the Google Play Store
1 2
1. Safety Points
✓The printer has a lithium-ion battery. Only use the
original battery and charge it with the supplied charger.
✓Do not put the battery in fire or water. This may cause
an explosion.
✓Do not dispose of the batteries in domestic waste, but
return them to us, the trade or your local waste disposal
company.
✓Do not open the paper cover while printing and for a
short time afterwards. Touching the print head may
cause burns.
2. About this Document
This document is a quick start guide for the SPORTident
Printer. It describes the most important steps for putting the
printer into operation and connecting it to the SPORTident
Orienteering App.
3. Starting up the Printer
Please put the printer into operation according to the
following instruction:
(1) The contact of the Li-battery inside the printer has been
taped with insulating tape to make shipping safe.
(2) Before using the printer for the first time, remove the
tape following the steps below:
(3) Charge the battery with the charger. When the battery
is fully charged, the LED light will become blue.
(4) Insert the 58 mm wide paper roll into the paper feeder
so the paper protrudes. Note the
orientation of the paper roll as
shown in the graphic.
(5) To start the printer, press the power button for 3
seconds.
4. Connecting the printer to your mobile phone
(1) Turn on the printer.
(2) Turn on Bluetooth on your phone.
1 2
1. Safety Points
✓The printer has a lithium-ion battery. Only use the
original battery and charge it with the supplied charger.
✓Do not put the battery in fire or water. This may cause
an explosion.
✓Do not dispose of the batteries in domestic waste, but
return them to us, the trade or your local waste disposal
company.
✓Do not open the paper cover while printing and for a
short time afterwards. Touching the print head may
cause burns.
2. About this Document
This document is a quick start guide for the SPORTident
Printer. It describes the most important steps for putting the
printer into operation and connecting it to the SPORTident
Orienteering App.
3. Starting up the Printer
Please put the printer into operation according to the
following instruction:
(1) The contact of the Li-battery inside the printer has been
taped with insulating tape to make shipping safe.
(2) Before using the printer for the first time, remove the
tape following the steps below:
(3) Charge the battery with the charger. When the battery
is fully charged, the LED light will become blue.
(4) Insert the 58 mm wide paper roll into the paper feeder
so the paper protrudes. Note the
orientation of the paper roll as
shown in the graphic.
(5) To start the printer, press the power button for 3
seconds.
4. Connecting the printer to your mobile phone
(1) Turn on the printer.
(2) Turn on Bluetooth on your phone.
3
(3) Search for available Bluetooth devices. The printer
answers with "SPORTident Printer 0xxxx". The serial
number of your printer "0xxxx" is noted on the
packaging.
(4) Connect the printer to the phone.
Bluetooth PIN is 5349
5. Hardware Interfaces
(1) The printer has a serial port (COM) and a micro-USB
port in addition to the port for the charging plug. You
need the COM interface to connect the SPORTident
Printout Station BS7-P to the printer. The connection
cable is available from SPORTident on request.
(2) Contact us at support@sportident.com if you want to
connect the printer to the computer.
(3) Always make sure that you are using the correct port.
Incorrect use of the ports can result in serious errors in
the computer.
6. Troubleshooting
In case of any problems please email
QUICK START GUIDE
SPORTident Printer
Bluetooth PIN is 5349
Use the printer with the
SPORTident Orienteering App
available in the Google Play Store
Indice
