SPROLINK VC1 Manuale utente

SEAMLESS PROFESSIONAL
SCALER AND SWITCHER
USER MANUAL
www.sprolink.com
VC1

)UTZKTZ
6XUJ[IZ ,KGZ[XKY
6XUJ[IZ /TZXUJ[IZOUT
.GXJ]GXK 5\KX\OK]
,XUTZ 6GTKR
(GIQ 6GTKR
5VKXGZOUTY
3KT[ 9ZX[IZ[XK
5[ZV[Z ,UXSGZ
9IXKKT 6GXGSKZKXY 9KZZOTM
6/6 9KZZOTM
)GYIGJOTM 9VROZ 9KZZOTM
+*/* 3GTGMKSKTZ
'J\GTIKJ 9KZZOTMY
/TV[Z
5[ZV[Z
9VKIOGRKLLKIZ ZXGTYOZOUTY JU[HRKIROIQ 3+4;

2
1. Product Features
zSupports Seamless Switching Between All the Signals
zSupports Customized Resolution Within 2.5 Million Pixels
zPIP Combination of Any Two Signals
zSupports EDID Management, to Realize Pixel to Pixel
zMultiple Units Could Be Cascaded
zWith Built-in Slot for 2 Sending Cards
zSupport Thirty Party Control System with Open Protocol

3
2. Product Introduction

4
3. Hardware Overview
3.1 Front Panel
OLED display panel
Knob
2Use for menu selection͵
rotating knob to find the option, and press the knob to confirm.
Buttons
3
SAVE button͵
To save the parameters after setting, by using “LOAD” to load the
saved data.
Press SAVE, the buttons “SCALE…..BLACK” are representing saving
modes of 1\2\3\4\5\6\7\8\9\0 separately, press any button to save
the current parameters to the specified saving mode.
4
SCALE Button͵
To adjust the size and position of the picture, input numbers by
the ”1-0” buttons under M1-DVI 4, or using the knob to adjust the
number.
5SPILT Button͵
To make multiple units cascaded, and setting split parameters.
6
PIP Button͵
Turn on two signals displaying and adjust pictures layout between
1Display the current working status and menu for buttons control.

RG_KX ' GTJ RG_KX (
,9 ([ZZUT͵
6XKYY ,9 H[ZZUT ZU YNU] OT ZNK L[RRYIXKKT JOYVRG_ SUJK
/46;: ([ZZUT͵
:U YKRKIZ YU[XIK YOMTGR ZNK H[ZZUT ROMNZY [V ]NORK [YKJ GY OTV[Z
=NKT ZNKXK GXK SUXK ZNGT H[ZZUTY ROMNZOTM [V ZNK UTK LRGYNOTM OY
ZNK UTK P[YZ HK INUYKT GTJ ZNK YZKGJ_ ROMNZOTM UTK OY ZNK YU[XIK
YOMTGR JOYVRG_KJ 3 XKVXKYKTZY 9*/ OTV[Z
(RGIQ ([ZZUT͵
6XKYY ZU YNU] HRGIQ YIXKKT
:'1+ ([ZZUT͵
/T ZNK ]UXQOTM SUJK UL :'1+ INUUYK ZNK VXKYKZ VOIZ[XK GTJ VXKYY
:'1+ ZU Y]OZIN OTZU ZNK SGOT U[ZV[Z
6XKYY :'1+ LUX YKIUTJY ZU KTZKX OTZU :'1+ ]UXQOTM SUJK VXKYY
YKIUTJY ZU Z[XT OZ ULL
;9(͵
:U VXUMXGS UX [VMXGJK
3+4; ([ZZUT͵
6XKYY ZU KTZKX OTZU ZNK SKT[ H_ [YOTM QTUH ZU LOTJ ZNK YVKIOLOKJ
SKT[ VXKYY 3+4; GMGOT ZU XKZ[XT ZU ZNK VXK\OU[Y SKT[
25'* ([ZZUT͵
:U RUGJ ZNK VXKYKZ YG\OTM SUJKY
6XKYY 25'* H[ZZUTY UL Ȕ9)'2+(2')1ȕ GXK XKVXKYKTZOTM YG\OTM
SUJKY UL BBBBBBBBB VXKYY GT_ UL ZNK QK_ ZU RUGJ ZNK
IUXXKYVUTJOTM YG\OTM SUJKY

6
3.2 Back Panel
Input connectors
1HDMI 1.3͵
Supports 2560*816@60 and 2k input
2CVBS͵
Supports input of 576i and 480i
3
VGA\Ypbpr͵
Supports 2k input, this could be set as VGA or Ypbpr input in the
advanced menu.
4DVI͵
Supports 2k input and user defined EDID
5SDI + SDI Loop͵
Optional module, support 3G SDI\HD SDI\SD SDI
Output connectors
6
DVI LOOP͵
Output the original DVI signal to another device, usually used in
cascading to another device
7DVI 1 output͵
Output to the monitor or sending card display screen.
8
DVI 2 output͵
Output to the monitor or sending card display screen, the same
picture as DVI 1
9Card slot͵Built-in card slot for 2 sending cards(small)
Switching and power supply
10 IEC-Power connector͵
AC 85-264V50/60HZmaximum power 45W
11 Power switch

5VKXGZOUTY
¾3KT[ 9ZX[IZ[XK
¾5[ZV[Z ,UXSGZ
¾9IXKKT 6GXGSKZKXY 9KZZOTM
¾6/6 9KZZOTM
¾)GYIGJOTM 9VROZ 9KZZOTM
¾+*/* SGTGMKSKTZ
¾'J\GTIKJ 9KZZOTMY
3KT[ 9ZX[IZ[XK

8
4.2 Output Format
VC1 default output resolution is 1920*1080@60, push SCALE button to
resize display when the screen is smaller than 1920*1080, set the output
resolution as below
1. Press MENU button to find the resolution and press knob to confirm.
-> OUTPUT FORMAT >>
SCREEN PARAMETERS >>
PIP >>
SPLIT >>
2. Turning the knob to find the correct resolution, or choose
“Customized Resolution”, press knob to Confirm.

+TZKX OTZU Ȕ)[YZUSO`KJ 8KYUR[ZOUTȕ VXKYY QTUH ZU IUTLOXS
9KZ /TV[Z XKYUR[ZOUT GY͵^&.@
9KZ H_ ZNK T[SKXOI H[ZZUTY VXKYY QTUH GTJ ZNKT YKZ GTJ
LVY 6[YN QTUH ZU IUTLOXS YKZZOTMY
6XKYY 3+4; XKZ[XT ZU ZNK VXK\OU[Y SKT[ ZU INKIQ OL OZ ]GY INGTMKJ
Y[IIKYYL[RR_
Indice
Altri manuali SPROLINK Interruttore


















