Spy On A Bird Network Camera Manuale utente

Spy On A Bird

User's Manual

(for Indoor IP Camera)

V4.21

Network Camera

Please read this manual carefully before you attempt to

Install this product and retain it for your future reference.

Contents

MAIN FEATURES.................................................................................................................................5

INSTALLATION.....................................................................................................................................8

NETWORK CAMERA SCREEN AND SETUP WINDOW ............................................................13

Viewing the camera from your mobile phone.................................................................................17

Network Camera Setting Interface...................................................................................................18

Camera................................................................................................................................................20

Camera Setup................................................................................................................................20

Stream Setup.................................................................................................................................21

OSD Setup.....................................................................................................................................24

Night Vision Setup (IR IPCAM)...................................................................................................25

Network................................................................................................................................................26

Wireless Setup...............................................................................................................................26

TCP/IP Setup.................................................................................................................................28

PPPoE Setup .................................................................................................................................30

DDNS Setup..................................................................................................................................31

UPNP Setup ..................................................................................................................................32

Alarm....................................................................................................................................................35

Motion Detection ..........................................................................................................................35

Schedule Setup..............................................................................................................................37

Alarm Management.......................................................................................................................38

Periodic Sending ...........................................................................................................................40

Buffer Management ......................................................................................................................42

Alarm Server.......................................................................................................................................43

FTP Server ....................................................................................................................................43

E-Mail Server................................................................................................................................44

HTTP Server .................................................................................................................................45

Storage.................................................................................................................................................46

Storage setup.................................................................................................................................46

Record onAlarm...........................................................................................................................47

Snapshot on Alarm........................................................................................................................48

Continuous Record........................................................................................................................49

Snapshot at Interval.......................................................................................................................50

FTP Sending..................................................................................................................................51

Browse Storage.............................................................................................................................52

Format SD Card............................................................................................................................53

Tools.....................................................................................................................................................54

System Identity .............................................................................................................................54

User Management.........................................................................................................................55

Date & Time..................................................................................................................................56

Backup or Reset............................................................................................................................57

Firmware Upgrade ........................................................................................................................58

SPEEDREAD YOUR NETWORK CAMERA..................................................................................59

Wizard...........................................................................................................................................59

System...........................................................................................................................................60

Support..........................................................................................................................................60

Reboot...........................................................................................................................................60

ADVANCED SETTINGS....................................................................................................................61

Port Forwarding ............................................................................................................................61

Proxy Server Setting .....................................................................................................................62

Reset the camera ...........................................................................................................................63

DEFAULT SETTINGS........................................................................................................................64

SPECIFICATIONS..............................................................................................................................68

TROUBLESHOOTING ......................................................................................................................69

GLOSSARY OF TERMS...................................................................................................................70

INTRODUCTION

Thank you for your interest and support in our product and purchasing this wireless network camera. The

camera can be accessed remotely, and controlled from any PC/laptop over the Intranet or Internet via web

browser. The user-friendly installation procedure and intuitive web-based interface offer easy integration with

your LAN environment or WiFi system. The camera also comes with a lot of useful alarm tool for notice user

any situation. We feel confident that you will be pleased with the quality and features of this product.

Notice

This product may cause interferences with other wireless equipment that operates at 2.4GHz ISM band.

Please turn off one of the equipments to eliminate the interference.

Product Assurance

This camera will emit electromagnetic wave, just like other wireless products, but its transmitting power is

less than other wireless products such as mobile phones. The 2.4GHz wireless camera meets wireless

frequency security standards and recommended indexes while working. These standards and indexes are

certificated by academic organization and represent the cogitative research of the scientific workers who

continuously explore and annotate the involved fields. So we believe that our products are safe for customers.

Approval Information

All our products meet the requirements of approval FCC or CE, and are granted the FCC or CE

certification. They are authorized to bear FCC or CE mark.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation

between the equipment and the receiver. -Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation Changes and modification not expressly approved by the manufacturer or registrant of this

equipment can void your authority to operate this equipment under Federal Communications Commissions

rules.

This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC

Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority

concerned and is authorized to bear CE mark.

Restrictions

1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and

this product is not designed and manufactured for such purpose.

2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown

of electrical medical equipment.

3. This product should be placed at least 1 foot away from any heart pacemaker. Radio waves might

potentially influence heart pacemaker.

4. DO NOT use this product for any illegal activities. It is the user’s responsibility to ensure that the

usage of this camera is of a legal nature.

Maintenance

1. Ensure that the camera and its power source have sufficient ventilation;

2. Do not shake, strike or drop the product;

3. Keep the camera dry and dustless and avoid exposing it to direct sunlight;

4. Do not place the product near any magnetic objects;

5. Avoid putting the product in places where there is constant temperature and humidity change;

6. Keep the product away from heat sources;

7. Do not use the camera near aggressive chemicals;

8. Do not use this camera near water;

9. Do not use the camera in the places which are enclosed by metal. The surrounding metal may shield the

electromagnetic waves, and result in failure of signal reception;

10. Please obey the local government's environment protection policy;

11. Please turn off the power when left unused;

12. Do not disassemble or attempt to repair the camera; doing so might cause damage to the product.

MAIN FEATURES

Easy Installation

The camera comes with built-in Wireless (IEEE802.11b/g) capability and a Web Server, therefore there

is no need to install a driver. The setup CD-ROM includes the Camera Setup software, User Manual and

Quick Installation Guide.

With industry standard automatic configuration-UPnP (Universal Plug and Play), your PC will discover and

connect to your camera automatically. Once connected, using a simple Web browser you can see what the

camera sees from anywhere in the world!

The camera can be either wall-mounted or ceiling-mounted using the supplied stand. It can also be

placed on a desktop using the supplied stand, thus providing a flexible installation solution.

802.11b/g Wireless LAN Connection Available

The camera is designed to not only work with your existing wired network but also with standard 802.11b/g

wireless devices, allowing the flexibility to operate the camera wirelessly. The camera utilizes SSID filtering,

powerful 64/128 bit WEP and new security standard WPA encryption to protect you from illegal intrusion.

3GPP Mobile Surveillance

The camera provides the ability to view the cameras monitored through your mobile phone as a live video

stream, it supports the telecommunications standard of 3GPP streaming format. All 3G enabled mobile

devices and most 2G phones that support the streaming standard of 3GPP are compatible.

Simultaneous High-Speed MPEG-4 and Motion JPEG

The camera allows live the MPEG-4 and Motion JPEG streams simultaneously. The camera features MPEG4

compression which compresses the video to make transmission faster and more efficient. The MPEG4 and

MJPEG image can be transmitted at 30 frames per second.

Simultaneous HTTP and RTSP streaming

The camera support HTTP and RTSP/RTP/RTCP protocol, and provide multiple HTTP and RTSP streams

simultaneously.

Audio Transmission

The camera comes with a built-in microphone for audio monitoring as well as video monitoring. Sound

captured by the camera is transmitted to the client’s PC.

Snapshot and Recording

You can capture a still image of the camera view on your PC and save the image as JPG or BMP format file.

You also can record the video and audio captured by the camera on your PC and save as an ASF format file.

Motion Detection Function

The camera can detect changes in the image being monitored. Once a change occurs it will send an email to

up to 3 email addresses with a video file or snapshot attached. The video file or snapshot can also be

uploaded to an FTP server. In addition the camera can be configured to send images at regular intervals.

OSD Function

OSD (On Screen Display) function can display system name, date and time, and user-defined on

screen.

Authentication

An authentication window requires you to enter the user ID and password. Password security can

prevent unregistered users from accessing your camera. Users can select Basic Authentication method

or Digest Access Authentication method.

Multi-Client Access

The camera allows up to 16 users to view the video simultaneously. Please note that it is possible that as the

number of simultaneously connected users to camera increases, the overall motion performance will

decrease.

Infrared Night Vision (IR IPCAM)

The camera utilizes 30 infrared LED to provide high light in darks environment.When the environment is dark,

the LED will be opened automatically due to a photosensitive component, and the moving images will be

changed to Black and White. Users can monitor clearly the things within 12 meters distance. Users also can

select open or close the infrared LED manually, and select whether change the images to black and white or

color automatically.

Adapter

This product conforms with the authenticated AC adapter. The adapter is marked with one or more of the

following:

Note: When using the power adapter, make sure the rating voltage on it is compatible with that of the device

to avoid potential damages resulting from incorrect usage of power supply.

PC System Requirements

The PC (Personal Computer) and the network must meet the following technical specifications for camera to

work properly.

1. Processor: Intel Pentium III, 1GHz or Higher (Pentium IV, 2 GHz or Higher

recommended)

2. RAM: 256 MB or more

3. Color Monitor: Suggest at least 800x600 and the latest driver for the Display Adapter

4. OS(Operating System): Windows 2000/XP/Vista

5. Web Browser: Internet Explorer Version 5.0 or above, DirectX 9.0c or later

6. Network Protocol: TCP/IP network protocol installed

7. Interface: 10/100 Mbps Ethernet® card/Wireless Network card for your network

connection

8. Other: CD-ROM Drive

INSTALLATION

Connecting the camera

Using a standard Ethernet network cable, connect the camera to your network (depending on your own setup,

this may be to your router or switch). see figure below

Connect the included power adapter to the power port on the camera and the other end into an electrical

socket. see figure below

Check that the power indicator is lit on the front of the camera.

Note:

Please handle the power adapter carefully to avoid the risk of accidental electric shock.

Rear view of camera

Camera Setup Installation & Usage

The camera Setup utility can easily and quickly detect cameras connected to your local network and list them

on the Camera Setup window, also you can use the camera Setup utility to assign an IP address to each

camera.

1. Insert the Installation CD into your CD-ROM drive and the installation screen should appear automatically

(See image below). If it does not, click “Start” then “Run”. In the text field enter “D:\autorun.exe” (if “D:” is the

letter of your CD-ROM Drive)

2. Click on “Install Camera Setup” and the following screen will be displayed.

3. If you want to change the default folder click “Change” to replace otherwise click “Next”

4. Click Install to install Camera Setup.

5. Click Finish to end the installation. You should now find a icon on the desktop.

Altri manuali per Network Camera

Indice

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente