Spypoint CELL-LINK Series Manuale utente

v.1.0

CELL-LINK

QUICK START GUIDE

ENGLISH

In the box

1x CELL-LINK cellular module

1x Memory card adapter cable

1x Mounting strap

1x Quickstart guide

1x MicroSIM card (preactivated and inserted into the CELL-LINK)

Components

STATUS LED

ON/OFF switch

Micro SD card slot

¼”20 tripod mount

Antenna

Memory card adapter cable port

12V jack

Locking latch

Memory card adapter cable

Slot for mounting strap

Cable lock hole

5 signal strength LEDs

SIM card slot

Battery ‘‘PUSH’’eject button

Battery compartment

AA battery holder

NOTE: Memory card and batteries are sold separately.

User manual, latest rmware, and FAQ available at:

support.spypoint.com

ENGLISH

PREPARATION

SELECT A POWER SOURCE

• Lithium or alkaline AA batteries (follow order/polarity indications)

• 12V rechargeable battery (#KIT-12V)

• 4.2V rechargeable battery pack (#LIT-10)

FOR BEST RESULTS AND NO LEAKAGE:

• Use only new lithium or alkaline batteries.

• Do not mix old and new batteries.

• Do not use rechargeable batteries (their lower voltage can generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock and open the CELL-LINK door.

• Take the battery holder out.

• Insert the AA batteries into the battery holder following polarity (+) and (-) indications.

• Place the battery holder back into the battery compartment.

• Make sure you hear a click when inserting the battery holder into the compartment.

FORMATTING YOUR M

icro

SD CARD

Before inserting the MicroSD card into your CELL-LINK, it must be reformatted via

a computer to ensure proper functionality.

Memory card is sold separately. Whether you choose to use a MicroSD card you

previously used in another device or a brand new one you've just bought, its

capacity must not exceed 32 GB and it must be reformatted. Do no use the "Quick

format" option.

INSERTING A M

icro

SD CARD

• Ensure the CELL-LINK is turned o and open its door.

• Insert a MicroSD memory card (up to 32 GB capacity) into the MicroSD

card slot with the label facing up.

• The card is inserted correctly when a click is heard.

NOTE: We recommend using the SPYPOINT #LIT-10

rechargeable lithium battery pack, sold separately.

ENGLISH

SPYPOINT APP

Follow these steps:

1. On Google Play

or the App Store

, search for "SPYPOINT app."

2. Download and install the app on your smartphone or tablet.

3. Start the app. Select "ACTIVATE A DEVICE." In the list, select "CELL-LINK"

then follow the steps.

4. When complete, a conrmation email will be sent to you with a generated password.

5. Log in to the SPYPOINT app using your email and password.

ACTIVATING YOUR CELL-LINK

You must activate your CELL-LINK via the free "SPYPOINT app"

or SPYPOINT website under the MY ACCOUNT section.

FINDING THE ACTIVATION CODE

The activation code is located inside the CELL-LINK battery

compartment door.You will need this unique code to activate

the CELL-LINK.

ENGLISH

SPYPOINT website

Follow these steps:

1. On the SPYPOINT website, select "MY ACCOUNT" in the top navigation menu. On the

displayed page, select "Register," ll out the required elds, then log in.

2. Select the + sign on the far right of the page; in the list, select "CELL-LINK" then

follow the steps.

3. When complete, a conrmation email will be sent to you with a generated password.

4. On the website, log in to your account using your email and password.

New settings take eect every time the CELL-LINK connects with the SPYPOINTapp

or website. Below are the most basic settings you will congure.

First transfer time: Allows you to choose the time when the CELL-LINK makes its

rst transfer of the day.

Transfer frequency: Allows you to choose the number of daily transfers.

ACTIVATING YOUR CELL-LINK

CONFIGURING YOUR CELL-LINK

NOTE: You can activate additional CELL-LINK’s for other cameras

and switch between them in the SPYPOINT app or the

"MY ACCOUNT" section of the SPYPOINT website.

CHOOSING A PHOTO TRANSMISSION

PLAN FOR YOUR CELL-LINK

Select a photo transmission plan via the SPYPOINT app or website

1. Upon activating your CELL-LINK, you will automatically benet

from our FREE monthly plan.

2. After your 30 days are up, you can select a new plan better suited

to your needs among the ones we oer or;

3. Keep your FREE monthly plan and continue receiving up to 100

photo transfers per month.

NOTE:

Photo transfers are set by default to every 4 hours from midnight.

ENGLISH

1. Open the CELL-LINK door

2. Turn the CELL-LINK ON (ON/OFF switch)

3. All lights ashing – Searching for signal

The signal search can take a few minutes to process. If only 1 bar is ashing, the

network test is unsuccessful. Try moving the CELL-LINK (along with your camera)

to another spot in order to maximize signal strength, then restart the cellular

module. This operation might need to be repeated as the SPYPOINT SIM card and

services are powered by multiple providers. The network modem will maneuver

to ensure the strongest signal strength by searching for the best tower available

(cellular network).

4. Solid bars – Signal strength

Once the network test is completed, bars will stabilize showing the signal

strength. Note that signal bars displayed on the CELL-LINK can dier from those

shown on other cellular devices as there is no industry standard or practice to

label DBM values to a specic number of bars.

5. All lights OFF – CELL-LINK ready

Shut the CELL-LINK door. The CELL-LINK has updated its status

in the SPYPOINT

app and website with its latest information. The

CELL-LINK is now ready to

grab the pictures taken by your trail camera and transmit them to you via the

SPYPOINT app or website upon its next transmission.

HERE ARE THE RECOMMENDED CAMERA SETTINGS FOR ENSURING

OPTIMAL PERFORMANCE OF YOUR CELLLINK:

•A low-resolution photo format.

•A delay no shorter than 1 minute between each detection.

•In time lapse mode, a delay no shorter than 1 minute.

STARTING YOUR CELL-LINK

NOTE:

Before starting the CELL-LINK, ensure you have successfully

congured your trail camera according to your preferences and

that you have done this by following your camera’s user manual.

NOTE:

The CELL-LINK doesn’t support video transfers. However, if you

congure your camera for having a photo taken before each video,

this photo will be sent out to you from the CELL-LINK.

ENGLISH

1. Open your camera door.

2. Take the CELL-LINK memory card

adapter cable and insert the

end with the SD card into your

camera’s SD card slot.

3. Keeping the SD memory card

adapter cable held tightly against

the case, direct the adapter cable

so that it exits from the bottom of

the camera case. The cable should

hang loosely below the camera.

(Avoid bringing the cable over

any critical components).

4. Shut the camera door and lock

the latch.

5. Flip the SD cable upward, sliding it up behind the camera, so that the CELL-LINK

connector sticks out from behind the top of your camera.

6. Mount your camera to the tree. (The CELL-LINK SD adapter cable should now be

found between the tree and camera)

7. Mount the CELL-LINK cellular module as close to your camera as possible.*

8. Connect the SD card cable connector to the CELL-LINK.

You can now access CELL-LINK photos, congurations, and statuses either via the

SPYPOINT app or your account on the SPYPOINT website.

INSTALLING AND CONNECTING THE CELL-LINK

To connect the SPYPOINT CELL-LINK to your trail camera from any brand, follow

these steps (or view our video in the Help section):

NOTE:

It is strongly recommended to mount your CELL-LINK cellular

module directly above your camera leaving as little space as

possible between the two. Doing so will reduce the risk of having

animals cause damage to the cable.

If your cable memory card adapter gets damaged replacement

cables can be ordered separately.

ENGLISH

ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES.

If one day your camera has been used so intensively that it has to be replaced, or if you

no longer have any use for it, you are obliged to dispose of it at a recycling center.

Information on return points for your electrical appliance can be obtained from your

local waste disposal company or from your local administrative offices.

Electrical appliances not only contain valuable recyclable raw materials, but also

substances which, if disposed of improperly, can affect public health and the

environment. Help ensure that valuable raw materials are recycled when you return

your old appliance to a central collection point.

The WEEE (Waste Electrical and Electronic Equipment Directive ) symbol represents

the obligation that the labeled camera

to be sent to a separate center for the proper

recycling of electrical and electronic equipment.

FREQUENCY RANGE:

800/ 850/ 900/ 1900/ 2100MHz

MAXIMUM TRANSMISSION POWER:

FREQUENCY

GSM850

EGSM900

DCS1800

PCS1900

GSM850 (8-PSK)

EGSM900 (8-PSK)

DCS1800 (8-PSK)

PCS1900 (8-PSK)

UMTS 2100

UMTS 1900

UMTS 900

UMTS 850

UMTS 800

DISPOSAL

FREQUENCY

MAX.

33DBM±2DB

30DBM±2DB

27DBM±3DB

26DBM±3DB

24DBM+1.7/3.7DB

ENGLISH

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

Operation is subject to the following two conditions:

1. This device must not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired operation.

FCC

THANK YOU FOR CHOOSING

FAQ, user manual & latest

rmware available at:

SUPPORT.SPYPOINT.COM

Live chat support at

Join the community

Sit back and relax as this device is covered by the "Know you’re

covered" 2-year warranty.We strive to provide our customers

with a positive experience and an outstanding service.

www.spypoint.com [email protected]



Indice

Altri manuali Spypoint Telecamera da ricognizione

Spypoint

Spypoint Solar-Dark Manuale utente

Spypoint

Spypoint LINK-MICRO-LTE Manuale utente

Spypoint

Spypoint SOLAR Manuale utente

Spypoint

Spypoint LINK-EVO Guida

Spypoint

Spypoint Force-Dark Manuale utente

Spypoint

Spypoint LINK-S Manuale utente

Spypoint

Spypoint IRON-10 Manuale utente

Spypoint

Spypoint SDB-85 Manuale utente

Spypoint

Spypoint Solar-Dark Manuale utente

Spypoint

Spypoint LM2 Manuale utente

Spypoint

Spypoint FORCE-11 Manuale utente

Spypoint

Spypoint IRON-9 Manuale utente

Spypoint

Spypoint LINK-MICRO Manuale utente

Spypoint

Spypoint LINK-MICRO-LTE Manuale utente

Spypoint

Spypoint LINK-MICRO-LTE Manuale utente

Spypoint

Spypoint FLEX G-36 Manuale utente

Spypoint

Spypoint FORCE-PRO Manuale utente

Spypoint

Spypoint mini-LIVE Manuale utente

Spypoint

Spypoint LINK-S-DARK Manuale utente

Spypoint

Spypoint LINK-MICRO-S-LTE Manuale utente

Spypoint

Spypoint LINK-DARK Manuale utente

Spypoint

Spypoint FLEX Manuale utente

Spypoint

Spypoint FORCE-11 Manuale utente

Spypoint

Spypoint 21 Manuale utente

Manuali Telecamera da ricognizione popolari di altre marche

Nestbox

Nestbox C13 Manuale utente

Wildview

Wildview STC-TGL1 Manuale utente

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuale utente

Suntek

Suntek HC-800M Manuale utente

Duramaxx

Duramaxx 10029765 Manuale utente

Brecom

Brecom C2400 Manuale utente

BlazeVideo

BlazeVideo A280W Manuale utente

Bestok

Bestok 5210GM Manuale utente

GardePro

GardePro X60P Manuale utente

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuale utente

PNI

PNI HUNTING 280C Manuale utente

Muddy

Muddy Pro-Cam 14 Manuale utente

Bresser

Bresser 3310006 Manuale utente

Recon Outdoors

Recon Outdoors HS410 Manuale utente

Braun

Braun 57660 Manuale utente

Wildgame

Wildgame Shadow Manuale utente

Hieha

Hieha WiFi900Pro Istruzioni per il montaggio

Bushnell

Bushnell 119437 Manuale utente