Manual | EXPO
ENTER, and you can see three items as below:
1) Software - This item displays the Software information.
2) Hardware - This item displays the Hardware information.
3) Fix times -This item displays the working hours about the light.
SET UP-In this menu, you can adjust the value of the the function.
1. Press“ENTER”button and then UP or DOWN button until“SET UP”is showed.
2. Press“ENTER”button, and there will be nine options.Then,press ENTER to select the option and press UP or
DOWN button to select the value you desire as below.
1) ID number - You can select an ID Number in this menu.Then, you can adjust the value of channel 11 to the
corresponding scope and control the light individually with control console.
2) Display Led - In this item,you can select“ON”or“OFF”.If you select ON,the displayer will be on all the time.And
if you select OFF,the displayer will extinguish about ten seconds later.
3) Key locks -You can select whether the password is on or o in this menu , and the password is [ DOWN ] + [
UP ] + [ DOWN ] + [ UP ] .If you select“on”,then you have to input the password before pressing the buttons.
Otherwise,the light won’t respond to your order.
4) Max temp - You can set the your desired Max working temperature about the light in this menu.When the wor-
king temperature of the light exceeds the Max temperature, the color of letter“Temp xx”showed in the menu
will change from white to yellow.Meanwhile, the light will adjust the working temperature automatically.
5) Dimmer WHITE - You can adjust the white brightness in this menu.
RUN MODE-In this menu, you can select DMX mode or SLAVE mode.
In SLAVE mode,you can select one light as the MASTER light and other lights in SLAVE mode will run following
the MASTER light.
1. Press“ENTER”button and then UP or DOWN button until“RUN MODE”is showed.
2.Press“ENTER”button, and“DMX”or“SLAVE”will be showed, then press ENTER to select your desired mode.
DMX-In this menu,you can connect several pieces of lights with DMX cable and control them with
control console.
1. Press“ENTER”button and then UP or DOWN button until“DMX ”is showed.
2. Press“ENTER”button, and“CHANNEL”or“ADDRESS”will be showed.Then press ENTER.
1)“Channel [xx]”will be showed,“X”represents the showed DMX channel mode. You can press the UP or DOWN
button to select your desired Channel mode.
2)“xxx”will be showed,“x”represents the showed address. You can press the UP or DOWN button to select your
desired address.
RESET-In this menu, you can reset all the value of the system.
1. Press“ENTER”button and then UP or DOWN button until“RE
