Stack-On QAS-1514 Manuale utente

40543-1511 116

Your Electronic Safe Combination:

Serial #:

Instructions

QAS-1514

NOTE: You can store your Key #, Serial # and

Combination on Stack-On’s SECURE web site –

www.stack-on.com under Cutomer Service.

Storing your Key # or Combination will provide

instant access to this important information should

you ever lose your keys or your combination.

Only you will have access to this information.

CONTROL FEATURES

1. Key lock

2. Combination buttons

3. Reset button (inside safe)

4. Battery Compartment (inside safe)

• Record the serial number from the tag on the

door front.

• Record your combination.

• Keep keys and combination in a secure place

away from children.

• DO NOT STORE YOUR KEYS OR

COMBINATION INSIDE THE SAFE.

Tools Required:

Drill

10 mm Wrench

3/16” (5 mm) drill bit for drilling into wood

Hardware Included:

(6) Lag screws Ø 6mm x 48mm Length

(6) Washers

(6) Plastic anchors

IMPORTANT

40543-1511 2

GETTING STARTED INSTALLING THE BATTERY

When you first receive your safe you will

need to open the door with the key. A battery

is included and is located in the top of the

Styrofoam packaging.

To open the safe, insert key into lock and

turn counter clockwise until the holster

compartment automatically opens.

To access the battery compartment you will

need to open the holster compartment

completely.

At the very back of the compartment you will

see two L shaped brackets. Rotate the L

brackets towards the top of the safe, so they

are released from the guides Then squeeze

the two brackets together so they almost

meet - this will immediately release the

compartment from the sides of the safe

body. Let the holster compartment open all

the way as shown in Figure 2. Rotate the L

brackets back so they are flat against the

back of the holster compartment.

NOTE: When installing or changing the

battery, always hold the battery connecting

cap while disconnecting or attaching the

battery. Do not pull on the wires. Doing this

could cause the power supply to become

disconnected from the lock.

NOTE: Leave the key in the lock while you

install the battery and set your combination.

This safe uses one 9 V alkaline battery.

Under normal use the battery will last about

a year.

NOTE: If the batteries are low the

combination buttons will flash red when

pushed. Replace the 9V battery with a new

alkaline battery as described below.

Locate the battery compartment at the very

back of the top of the inside of the safe,

slide off the battery cover.

NOTE: This key has also been provided in

case you lose or forget your security code or

the batteries run low. If you lose your key,

you may purchase a replacement key by

referencing the serial number located on the

front of the door. See the Key Request

section regarding key replacement for

further information.

Inside safe

Battery

Battery Cover

40543-1511 316

CLOSING THE SAFE

Lift up the up the holster compartment until

the L shaped brackets clear the inside of

the frame. Rotate the L bracket back so

they point to the top of the safe and then

push them out towards the safe body which

will hold the holster compartment up. Then

rotate the L brackets back into the guides

on the back of the holster compartment.

Close the compartment and hold it closed

until the green light goes on and the unit

beeps.

• For security you must program your own

combination after opening the safe.

• Record this new combination on this form

or store your combination on our secure

website at www.stack-on.com under

Customer Service. If you write down your

combination you must keep this information

in a secure place, away from children, not

inside the safe.

PROGRAMMING YOUR OWN

ELECTRONIC COMBINATION

Use the key to open the safe. The reset button

is only accessible when the locking mechanism

is in the un-locked position.

Example: (RIGHT) - (LEFT) - (CENTER) -

(LEFT) - (RIGHT)

Press the Reset Button (3) located inside the

safe. Two “beeps” will sound (if the sound is

turned on) and all 3 buttons will flash blue twice.

You will have 5 seconds to begin entering your

combination or you will have to start over.

Enter your own 3-8 button combination by

pressing any combination of the 3 buttons.

For Each combination entry a “beep” will sound

(if the sound is turned on) and all the buttons will

light up green. If you delay more than 5 seconds

between entries there will be 2 beeps (if the

sound is turned on) and 2 red flashes and you

will have to start over from step 2. After you

have finished entering your combination, you will

have 5 seconds to press the Reset Button to

record your new combination or you will have to

start over from step 2.

When you press the Reset Button to record your

new combination, there will be two “beeps” (if the

sound is turned on) and all 3 buttons flash blue

twice, indicating your new combination has been

recorded.

NOTE: To verify your combination the

locking mechanism must be in the

locked position.

NOTE: When closing the safe with a pistol

in the holster compartment, make sure the

pistol does not interfere with the frame of the

safe.

To confirm your combination was entered correctly,

turn the key to the locked position (the door may

remain open) and follow the instructions in the

“OPENING THE SAFE USING YOUR

COMBINATION” section.

If the combination you entered does not activate

the locking mechanism, you will need to go back to

step 1 in this section.

Reset Button

Inside safe

NOTE: Reset button is only accessible

when the locking mechanism is in the

un-locked position.

40543-1511 416

OPENING THE SAFE USING

YOUR COMBINATION

If an incorrect security codes is entered 1

additional time, the safe will beep 5 times

(if the sound is turned on) and the red light

will flash 5 times resulting in the safe being

automatically locked out for 5 minutes

before the code can be tried again. The

safe will beep one time (if the sound is

turned on) and the green light will flash

once when the lockout period is over.

To close the safe, push the door closed

until locked (the lights will flash green and if

your sound is active it will beep when it has

finished locking).

Enter your combination using the buttons.

The buttons will light up green and there will

be one “beep” (if the sound is turned on) for

every entry. If you entered the correct

combination, the buttons will flash green and

the door will open. If the combination is

incorrect the safe will beep 3 times (if the

sound is turned on) and the red light will flash

3 times.

NOTE: You will have 2 seconds between

individual entries before the safe assumes

you have entered your complete combination.

If an incorrect security code is entered 3

times the safe will beep 5 times (if the sound

is turned on) and the red light will flash 5

times resulting in the safe being automatically

locked out for 60 seconds before you can try

your code again. The safe will beep one time

(if the sound is turned on) and the green light

will flash once when the lockout period is

over.

40543-1511 5

Open the holster compartment as described

in the Installing the Battery section. When

the holster compartment has been released

from the frame and the L brackets have

been rotated so they are flat against the

back of the holster compartment, locate 2

nuts which are located in the bottom of the

safe body. Remove the 2 nuts and washers

using your fingers and lift the safe off the

tabs in the back of the sleeve.

There are some securing tabs on the

mounting sleeve that guide the back of the

safe into position - you will need to make

sure you have maneuvered the safe out of

these tabs.

REMOVING THE SAFE FROM THE

MOUNTING BRACKET

TURNING THE KEYPAD SOUND

OFF/ON

Your safe comes with the "Beep" sound

turned on. You can turn off the "Beep"

sound of the keypad by pressing all the

buttons at the same time and holding for 3

seconds until the green light flashes.

To turn the "Beep" sound on, press the left

and middle button at the same time and hold

for 3 seconds until the green light flashes.

Mounting

Bracket

Thumb nuts

STACK-ON PRODUCTS CO.

P.O. BOX 489, WAUCONDA, IL 60084

The safe must be secured to the mounting

bracket. The safe installed in the mounting

bracket must be mounted to a wall or solid

surface.

For optimal safety and security, the

safe should be installed in an isolated, dry

and secure area.

SECURING THE SAFE

SELECTING A LOCATION

NOTE: This safe must always be secured in

the mounting bracket and mounted to a wall

or solid surface. Failure to do so will

compromise the safety and security of

the safe.

Secure the mounting bracket to wall studs

using the pre-drilled mounting holes in the

bracket and hardware provided.

NOTE ON LOCKING THE SAFE: The

mounting bracket needs to be in an upright

position, as shown in figure 3, for the locking

mechanism to function properly. Failure to

mount the safe in the correct upright position

will compromise the safety and security of

the safe.

NOTE: The mounting bracket must be

secured to a wall stud on one side of the

bracket in the top and bottom holes so that it

is anchored to the wall stud in two locations.

Wall anchors should be used on the other

side. The bracket should be secured in 4

locations. Use the hardware provided or

consult your hardware retailer for fastening

hardware for your particular mounting

surfaces. After the mounting bracket is

secured you must secure the safe to the

bracket to insure the optimal safety and

security of the safe.

Place the mounting bracket in the desired

location and mark the mounting holes to be

used with a pencil. Move the mounting

bracket and drill the pilot holes for the

screws. For mounting to a wall stud, drill a

3/16” diameter pilot hole and attach the

bracket using the Lag screws and washers.

Place the safe back into the mounting

bracket and replace the 2 thumb nuts and

washers. Secure the holster compartment

in place, following the steps in Closing The

Safe section of these instructions. Close

and lock the safe

THE SAFE SHOULD ALWAYS BE KEPT

OUT OF THE REACH OF CHILDREN.

FIGURE 3

IMPORTANT

Keep keys and combination in a secure place, away

from children. Keep this record of your serial number

and combination in a secure place separate from your

safe. To order a replacement key set, follow the

instructions on the aached form.

Lag screws

Mounting

Bracket

40543-1511 6 16

Key Request

“This is not a Registration Form”

Verification of ownership is required in order to receive replacement key for your security product.

In order to receive a replacement key to your security product:

1. Complete the following form and send to Stack-On Products.

2. Send a copy of your valid driver’s license along with the form.

3. Send a copy of the receipt showing the original purchase.

4. Security product owner must sign form.

5. Owner’s signature must be notarized.

6. Send $10.00 for replacement key. Personal Check, MasterCard, or Visa accepted.

7. Send completed information to:

Stack-On Products Company

1360 N. Old Rand Road

P.O. box 489

Wauconda, IL 60084

Serial Number______________________ Key Number (if applicable) _______

Unit Dimensions________________________________________

Unit Description___________________________________________________________

Owner’s Name ____________________________________ Date Purchased___/___/____

Owner’s Address ___________________________ Unit or Apt Number _________________

City ___________________________ State _______________ Zip Code________________

Telephone Number: (____)___________________ Fax Number: (____)___________________

Owner’s Email Address: ________________________________________________________

Owner’s Signature __________________________ Notary Signature________________

Notary Commission Expires: _____/_____/_____ Notary Stamp

SERVICE REQUESTED

Key Replacement: Yes No

$10.00 charge for this service

Credit Card Information (Please circle one) MasterCard Visa

Expiration Date: ___/___/___ Card Number:______________________________________

Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_________

9/07

NOTE: You can store your Key #, Serial # and Combination on Stack-On’s SECURE web site – www.stack-on.com under

Customer Service. Storing your Key # or Combination will provide instant access to this important information should you

ever lose your keys or your combination.

Only you will have access to this information.

40543-1511 7 16

40543-1511 816

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE PRICE

OF THE PRODUCT.

STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED

EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS DESCRIBED

ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.

STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL CONSUMER

FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES

ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON PRODUCTS, INCLUDING THE

SAFES.

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES

EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED AND EXCLUDED. STACK-ON

SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES. STACK-ON NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT, ANY OTHER LIABILITY

IN CONNECTION WITH THE SALE OF STACK-ON’S STEEL SAFES.

THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT, WHICH

HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR MISUSE,

INCORRECT MAINTENANCE, ALTERATION OR REPAIR BY ANYONE OTHER THAN STACK-ON. IN

ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES OR PARTS USED WITH OR

IN THE PRODUCT WHICH ARE NOT INCLUDED WITH THE ORIGINAL PURCHASE.

If Stack-On is properly notified during the three-year warranty period and, after inspection confirms there

is a defect, Stack-On will, at its sole option, provide repair parts or exchange the product at no charge, or

refund the purchase price of the product.

Stack-On Products Company

1360 North Old Rand Road

Wauconda, IL 60084

[email protected]

If you believe there is a defect in material or workmanship in your Steel Safe during the three-year

warranty period, please contact our customer service department, by regular mail or email at the address

listed below, and include with your correspondence proof of purchase information and the model number

of the safe.

Stack-On Products Co. (“Stack-On”) Steel Safes are warranted to be free from defects in material and

workmanship for a period of three (3) years from the date of original purchase by a consumer. This

warranty extends to the initial consumer only.

LIMITED THREE YEAR WARRANTY

STEEL SAFES

Su combinación de caja fuerte electrónica:

Serie #:

Instrucciones

QAS-1514

NOTE:

Usted puede almacenar su número de llave,

número de serie, y la combinación en el sitio web

SEGURO de Stack-On - www.stack-on.com en

Customer Service. Almacenamiento de su número

de llave o combinación proporcionará acceso

instantáneo a la información importante en caso

combinación. Soló tendrá accesso a esta

información.

CARACTERISTICAS DE CONTROL

1. Bloqueo de teclas

2. Botones de combinación

3. Botón de reinicio (en el interior)

4. Compartimiento de la batería (en el interior)

•

Anote el número de srie de la etiqueta en la parte

frontal de la puerta.

•

Grabar su combinación.

•

las llaves y la combinación en un lugar

•

GUARDE LAS LLAVES O COMBINACIÒN

DENTRO DE LA CAJA FUERTE.

Herramientas Necesarias:

Taladro

10 mm Llave

3/16” (5 mm) broca para perforar madera

Hardware Incluido:

(6) Tirafondos Ø 6mm x 48mm Largo

(6) Arandelas

(6) Anclajes de Plástico

40543-1511 916

IMPORTANTE

de que alguna vez perder las llaves o su

PARA COMENZAR INSTALACIÒN DE LA BATERÌA

Cuando usted recibe su caja fuerte, usted

tendrá que abrir la puerta con la llave. Una

batería está incluido y se encuentra en la

parte superior del embalaje de Styrofoam.

Para abrir la caja fuerte, inserción llave en la cerradura

y girar hacia la izquierda hasta que el

compartimiento de la funda se abre automático.

Para acceder al compartimiento de la batería

tendrá que abrir el compartimiento de la funda

por completo.

En la parte posterior del compartimiento, verá

dos soportes en forma de “L”. Girar lost soportes

de “L” hacia la parte superior de la caja fuerte

de modo que se liberan de las guías. Apriete

los dos soportes juntos para que casi toque -

esto dará a conocer inmediatamente el

compartimiento de los lados del cuerpo de la

caja fuerte. Deje que el compartimiento de la

funda abierto todo el camino como se muestra

en la Figura 2. Gire los soportes en “L” hacia

atrás por lo que son completamente contra la

NOTA: Al instalar o cambiar la batería, sujete

siempre la batería conectando el casquillo

mientras se desconecta o colocar la batería.

No tire de los cables. Hacer esto podría causar

que la fuente de alimentación se desconecte de

la cerradura.

NOTA: Deja la llave en la cerradura mientras

instala la batería y configurar su combinación.

Este caja fuerte usa una batería de 9V alcalina.

En condiciones de uso normal, la batería durará.

aproximadamente un año.

NOTA: Si las baterías están bajas las teclas de

combinación parpadeará en rojo cuando se la

presiona. Reemplace la batería de 9V con una

nueva batería alcalina como se muestra abajo.

Localice el compartimiento de la batería en la

parte posterior de la parte superior del interio de

la caja fuerte. Deslice la tapa de la batería.

40543-1511

1016

NOTA: Esta llave tabién ha sido proporcionada

por si pierde u olvida su código de seguridad

o las baterías se agotan. Si usted pierde su,

llave usted puede comprar una llave de

reemplazohaciendo referencia al número de

serie ubicado en la parte frontal de la puerta.

Consulte la sección Key Request respecto

Elemento clava para más información.

Dentro de Caja

Batería

Tapa de la batería

parte trasera del compartimiento funda.

Indice

Lingue:

Altri manuali Stack-On Sicuro

Stack-On

Stack-On GCB-18C Manuale utente

Stack-On

Stack-On TD-40-SB-B-S Manuale utente

Stack-On

Stack-On QAS-1512-B Manuale utente

Stack-On

Stack-On PDS-1500 Manuale utente

Stack-On

Stack-On GCB-1522 Manuale utente

Stack-On

Stack-On PWS-1855-E Manuale utente

Stack-On

Stack-On QAS-1200B Manuale utente

Stack-On

Stack-On TD-24-GP-C-S Manuale utente

Stack-On

Stack-On Buck Commander BC-18-MB-E-S Manuale utente

Stack-On

Stack-On E18-30-MB-E Manuale utente

Stack-On

Stack-On SS-22-MG-C Manuale utente

Stack-On

Stack-On Security Plus QAS-1310 Manuale utente

Stack-On

Stack-On QAS-450 Manuale utente

Stack-On

Stack-On SECURITY PLUS GC-908-5 Manuale utente

Stack-On

Stack-On PS-7-B Manuale utente

Stack-On

Stack-On SHD-SU-BG-B Manuale utente

Stack-On

Stack-On E-66-MB-E-S Manuale utente

Stack-On

Stack-On PS-15-05 Manuale utente

Stack-On

Stack-On GCG-8RTA Manuale utente

Stack-On

Stack-On Security Plus QAS-1304 Manuale utente

Stack-On

Stack-On PWS-1555 Manuale utente

Stack-On

Stack-On TD5518-24-GP-E-S Manuale utente

Stack-On

Stack-On PWS-15522 Manuale utente

Stack-On

Stack-On E-69-MB-B-S Manuale utente

Manuali Sicuro popolari di altre marche

Squire

Squire Stronghold Keysafe Manuale utente

Phoenix

Phoenix FS0352C Scheda informativa del prodotto

Phoenix

Phoenix KS0030E Series Manuale utente

Vaultek

Vaultek 10 Series Scheda tecnica

Arregui

Arregui CLASS Manuale utente

Beaumont

Beaumont SMART KEYBOX Manuale utente

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente

Hornady

Hornady SnapSafe Trunk Safe II Manuale utente

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuale utente

Honeywell

Honeywell 5912 Manuale utente

Phoenix

Phoenix FS1280F Manuale utente

Phoenix

Phoenix SS0992K Scheda informativa del prodotto

Technomax

Technomax Trony Series Manuale

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente

RICHTER CZECH

RICHTER CZECH LA Manuale operativo

Olymp

Olymp GOsafe 110 Manuale utente

Phoenix

Phoenix SS0100E Scheda informativa del prodotto

Clarke

Clarke Strong-Arm CS1000K Manuale di istruzioni