Stack-On SHD-AOTT-BG-B Manuale utente
40715-1705 116
®
Serial #:
IMPORTANT
NOTE: You can store your Key #, and Serial # on
Stack-On’s SECURE website – stackon.com
under Customer Service. Storing your Key # will
provide instant access to this important
information should you ever lose your keys.
Only you will have access to this information.
• Record the serial number from the tag
on the back of safe or the tag on the
inside of the lock cover plate on the front
of the safe
CONTROL FEATURES
1. Biometric Scanner
2. Key Lock
3. Battery Compartment (inside safe)
4. Reset Button (inside safe)
Battery Disposal
Please dispose the used batteries per municipal
or provincial law.
INSIDE SAFE DETAIL
• Keep keys in a secure place away
from children
• DO NOT STORE KEYS INSIDE THE SAFE
INSTRUCTIONS
SHD-AOTT-BG-B
(4) M6 x 50 mm (2” long) Lag Screws
(4) Washers
(4) M6 x 40 mm (1-1/2” long) Plasc Masonry Anchors
Drill
Thin Bladed Flat Head Screwdriver
10 mm Wrench
3/8” (9.5 mm) masonry drill bit for drilling into masonry
3/16” (5 mm) drill bit for drilling into wood and wall studs
HARDWARE INCLUDED:
TOOLS REQUIRED:
INSIDE SAFE DETAIL
Battery
Compartment
40715-1705 216
3. Battery Compartment (inside safe)
NOTE: The reset buon located on the inside
of the door, is covered with a removable cap.
When you use the reset buon while
recording your fingerprint, remove the cap to
access the buon. Use a pen p to push the
reset buon.
Replace the cap securely over the reset
buon aer recording your fingerprint.
Failure to do so will compromise the safety
and security of the safe.
Locate the baeries inside the safe. Open the
baery compartment on the back of the door
by pushing the tab in the direcon of the arrow
and install the baeries. The light will flash
green with one beep (if the sound is turned on)
and the baeries are installed correctly.
GETTING STARTED
When you first receive your safe you will
need to open the door with the key in order
to install the baeries. Baeries are
included and are located inside the safe.
To open the door with the key, first remove
the lock cover from the front of the faceplate
using a thin bladed flathead screwdriver.
Insert the key and turn clockwise.
The door will open automacally when the
key is in the open posion.
NOTE: Do not mix old and new baeries.
Do not mix alkaline, standard or
rechargeable baeries.
This safe uses 4 - AA baeries. Under normal
use, baeries will last about 1 year.
NOTE: If the baeries are low the indicator light
will flash blue twice when you start scanning.
Replace with 4 new AA alkaline baeries.
BATTERY INSTALLATION
NOTE: You must turn the key back to the
locked posion before you can record a
fingerprint, close and lock the door.
NOTE: This key has also been provided in case
the baeries run low. If you lose your key, you
may purchase a replacement key by referencing
the serial number located under the removable
lock cover. See secon at the end of this
instrucon regarding replacement keys.
Reset Button
40715-1705 316
NOTE: In certain dry climate condions, your
fingerprint may not scan. If your fingerprint did not
scan, we recommend moisturizing with minimal
loon and trying again.
RECORDING FINGERPRINTS
To record a fingerprint, first press the Reset Buon
on the inside of the safe with a pen and then
release it. The scanner will turn blue with two beeps
(if the sound is turned on) and the green light flashes
twice, you will then record the same finger three
mes as follows:
1. Place your finger on the scanner unl there
is one beep (if the sound is turned on) and the
green light flashes once. Li your finger off
the scanner.
2. Place the same finger on the scanner for a
second me, holding the finger in the same
posion unl there is one beep (if the sound is
turned on) and the green light flashes once.
Li your finger off the scanner.
3. Place the same finger on the scanner for a
third me, holding the finger in the same posion
unl there are two beeps (if the sound is turned
on) and the green light flashes twice.
Li your finger off the scanner. Your fingerprint is
now recorded.
SCAN THE SAME FINGER 3X
If the red light flashes three mes with three beeps
(if the sound is turned on) your fingerprint did not
get recorded and you will have to start over.
If you enter more than 20 fingerprints, the red light
will flash 5 mes and there will be 5 beeps
(if the sound is turned on).
When you first receive your safe there are no
recorded fingerprints. Any fingerprint will open the
safe unl a fingerprint is recorded. For security you
must record a fingerprint.
Failure to do so will compromise the safety and
security of the safe.
You can record up to 20 different fingerprints for
opening the safe. For best results, each individual
should use their thumb or index finger only.
CLEARING THE MEMORY
To clear the memory of all recorded fingerprints,
locate the reset buon inside the safe and press
this buon for about 5 seconds unl the green
light flashes 10 mes with 10 beeps (if the sound
is turned on). All recorded scans will be erased.
NOTE: For security you must record a
fingerprint. Failure to do so will compromise
the safety and security of the safe.
Before you can record a fingerprint, with the door
open, the key must be in the locked posion - you
can not program the keypad if the key is in the
unlocked posion.
LOCKING THE SAFE
NOTE ON LOCKING THE SAFE: Because the
locking mechanism is deacvated for
approximately 3 to 6 seconds aer the
combinaon is entered, wait a minimum of 6
seconds from the me the combinaon is entered
to lock the safe.
When operang the lock with the key, you must
turn the key back to the locked posion before
you are able to close and lock the safe door.
NOTE: DO NOT SHUT THE DOOR UNTIL YOU
HAVE CONFIRMED THAT YOUR FINGERPRINT
HAS BEEN ENTERED CORRECTLY.
40715-1705 416
OPENING THE SAFE USING YOUR
FINGERPRINT
To open the safe, touch the black frame around
the scanner, this will acvate the scanner. The
blue light will come on with one beep (if the
sound is turned on), place your recorded finger
on the scanner to open the safe.
If the green light flashes twice with 2 beeps
(if the sound is turned on), the scan has been
accepted and the door will open.
If the red light flashes once, the scanner did not
read your fingerprint and you must try again. If
the red light flashes 3 mes, the scanner read
your fingerprint and rejected the scan.
If there are 3 rejected scans, where your
fingerprint was read, and the red light flashes
5 mes with 5 beeps (if the sound is turned
on), you will have an automac lockout for 60
seconds before you can try a scan again. The
safe will beep 1 me (if the sound is turned
on) and the green light will flash once when
the lockout period is over.
If there is 1 more rejected scan, the red light
will flash 5 mes with 5 beeps (if the sound is
turned on), you will have an automac
lockout for 5 minutes before you can try a
scan again. The safe will beep 1 me (if the
sound is turned on) and the green light will
flash once when the lockout period is over.
SELECTING A LOCATION
SECURING THE SAFE
THE SAFE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
NOTE ON LOCKING THE SAFE: The safe needs to
be in an upright posion, as shown in Figure 1
(as shown below), for the locking mechanism
to funcon properly. Failure to mount the safe
in the correct upright posion will compromise
the safety and security of the safe.
Secure the safe to a to a wall stud and a
permanent shelf or the floor, using the predrilled
mounng holes in the safe.
NOTE: The safe must be secured to a wall stud
on one side of the safe. A wall anchor should be
used on the other side. The safe should also be
mounted to a permanent shelf or the floor. Use
the hardware provided or consult your hardware
retailer for fastening hardware for your
parcular mounng surfaces.
Place the safe in the desired locaon and mark
the mounng holes to be used. Move the safe
and drill the appropriate diameter and depth of
pilot holes depending on the type of hardware
being used and the mounng surface.
Secure the safe with the fasteners. (Figure 1)
NOTE: This safe must be mounted to a wall
stud and a permanent shelf or the floor. Failure
to do so will compromise the safety and
security of the safe.
The safe must be mounted to a wall stud and a
permanent shelf or the floor. For opmal
safety and security, the safe should be installed
in an isolated, dry and secure area.
FIGURE 1
40715-1705 516
Image does not necessarily
reflect the style of weapon.
Pistols can be stored for quick access by sliding
the gun’s barrel over the pistol rack as shown
in Figure 4.
FIGURE 3
FIGURE 4
FIGURE 2
BOTTOM TAB
TOP TAB
PISTOL RACKS
WEAPON PLACEMENT
GUN MOUNT BAR
GUN MOUNT BAR
Install the pistol racks on the built-in gun mount bar located on the back wall of the safe.
NOTE: Make sure that top and boom tabs are secured over the gun mount bar as shown in Figure 2.
NOTE: Pistol racks can be adjusted horizonally on the gun mount bar.
40715-1705 616
Do not use glass cleaners or sprays on this safe.
Clean with a damp cloth.
MAINTENANCE
IMPORTANT
Keep keys in a secure place, away from
children. Keep this record of your serial
number in a secure place separate from your
safe. To order a replacement key set, follow
the instrucons on the aached form.
STACK-ON PRODUCTS COMPANY
P.O. BOX 489
WAUCONDA, IL 60084
If the door of the safe starts to rub on the door
frame, open the door per the instrucons above.
By the door hinges you will find a threaded
stem. Use an Allen Wrench to ghten the
threaded stem. This will realign the door.
Tools Required:
Phillips screwdriver
5mm Allen wrench
TURNING THE SOUND OFF/ON
To turn the sound off, press the scanner with a
recorded fingerprint for 10 seconds unl the
green light flashes once.
To turn the sound on, press the scanner with a
recorded fingerprint unl you hear one beep
and the green light flashes once.
Your safe comes with the beep sound
turned on.
40715-1705 716
Key Request
This is not a Registration Form
Verification of ownership is required in order to receive replacement key for your security product.
In order to receive a replacement key to your security product:
1. Complete the following form and send to Stack-On Products.
2. Send a copy of your valid driver’s license along with the form.
3. Send a copy of the receipt showing the original purchase.
4. Security product owner must sign form.
5. Owner’s signature must be notarized.
6. Send $10.00 for replacement key. Personal Check, MasterCard or Visa accepted.
7. Send completed information to:
Stack-On Products Company
1360 N. Old Rand Road
P.O. box 489
Wauconda, IL 60084
Serial Number______________________ Key Number (if applicable) _______
Unit Dimensions________________________________________
Unit Description___________________________________________________________
Owner’s Name ____________________________________ Date Purchased___/___/____
Owner’s Address ___________________________ Unit or Apt Number _________________
City ___________________________ State _______________ Zip Code________________
Telephone Number: (____)___________________ Fax Number: (____)___________________
Owner’s Email Address: ________________________________________________________
Owner’s Signature __________________________ Notary Signature________________
Notary Commission Expires: _____/_____/_____ Notary Stamp
SERVICE REQUESTED
Key Replacement: Yes No
$10.00 charge for this service
Credit Card Information (Please circle one) MasterCard Visa
Expiration Date: ___/___/___ Card Number:______________________________________
Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_________
9/07
NOTE: You can store your Key #, Serial # on Stack-On’s SECURE website – stackon.com under Customer Service.
Storing your Key # will provide instant access to this important information should you ever lose your keys.
Only you will have access to this information.
®
40715-1705 816
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE
PRICE OF THE PRODUCT.
STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED
EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS
DESCRIBED ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.
STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL
CONSUMER FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR
PUNITIVE DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON
PRODUCTS, INCLUDING THE SAFES.
THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED AND
EXCLUDED. STACK-ON SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR
LIABILITIES. STACK-ON NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO
ASSUME FOR IT, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF
STACK-ON’S STEEL SAFES.
THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT,
WHICH HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR
MISUSE, INCORRECT MAINTENANCE, ALTERATION OR REPAIR BY ANYONE OTHER
THAN STACK-ON. IN ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES
OR PARTS USED WITH OR IN THE PRODUCT WHICH ARE NOT INCLUDED WITH THE
ORIGINAL PURCHASE.
If Stack-On is properly notified during the three-year warranty period and, after inspection
confirms there is a defect, Stack-On will, at its sole option, provide repair parts or exchange the
product at no charge, or refund the purchase price of the product.
Stack-On Products Company
1360 North Old Rand Road
Wauconda, IL 60084
If you believe there is a defect in material or workmanship in your Steel Safe during the
three-year warranty period, please contact our customer service department, by regular mail or
email at the address listed below, and include with your correspondence proof of purchase
information and the model number of the safe.
Stack-On Products Co. (“Stack-On”) Steel Safes are warranted to be free from defects in
material and workmanship for a period of three (3) years from the date of original purchase by a
consumer. This warranty extends to the initial consumer only.
LIMITED THREE YEAR WARRANTY
STEEL SAFES
®
40715-1705 916
®
Número de serie:
IMPORTANTE
NOTA: Puede almacenar su número de clave y
número de serie en el sitio web SECURE de
Stack-On - stackon.com en Servicio al cliente.
Almacenar su llave # proporcionará el acceso
inmediato a esta información importante si usted
pierde nunca sus llaves.
Sólo usted tendrá acceso a esta información.
• Anote el número de serie de la etiqueta en la
parte posterior de la caja fuerte o la etiqueta en
el interior de la placa de la cubierta de la
cerradura en la parte delantera de la caja fuerte
• Mantenga las llaves en un lugar seguro lejos
de los niños
• NO GUARDE LAS TECLAS DENTRO
DEL SEGURO
CARACTERÍSTICAS DE CONTROL
1. Escáner biométrico
2. Bloqueo de llave
3. Compartimiento de la batería (interior seguro)
4. Botón de reinicio (interior seguro)
Eliminación de la batería
Deseche las baterías usadas según la ley
municipal o provincial.
DETALLE DE LA CAJA
FUERTE INTERIOR
INSTRUCCIONES
SHD-AOTT-BG-B
(4) M6 x 50 mm (2 " largo) Tornillos Lag
(4) Arandelas
(4) M6 x 40 mm (1-1/2” largo) Anclajes de plásco
Taladro
Destornillador de cabeza plana de hoja delgada
Llave de 10 mm
3/8” (9.5 mm) Broca de mampostería para perforar en
mampostería
3/16” (5 mm) Taladro para la perforación en madera y los
pernos de la pared
HARDWARE INCLUIDO:
HERRAMIENTAS NECESARIAS:
DETALLE DE LA CAJA
FUERTE INTERIOR
Compartimiento de la
batería
40715-1705 10 16
NOTA: El botón de reinicio situado en el
interior de la puerta, está cubierto con una
tapa extraíble. Cuando ulice el botón de
reinicio mientras graba su huella digital, rere
la tapa para acceder al botón. Ulice una
punta del lápiz para presionar el botón de
reinicio.
Vuelva a colocar la tapa firmemente sobre el
botón de reinicio después de grabar su huella
digital. Si no lo hace, se pondrá en peligro la
seguridad de la caja fuerte.
EMPEZANDO
Cuando reciba su caja fuerte, tendrá que
abrir la puerta con la llave para instalar las
baterías. Las baterías están incluidas y se
encuentran dentro de la caja fuerte.
Para abrir la puerta con la llave, rere
primero la cubierta de la cerradura de la
parte delantera de la placa frontal con un
destornillador de punta fina. Inserte la llave
y gírela en sendo horario.
La puerta se abrirá automácamente cuando
la llave esté en posición abierta.
NOTA: No mezcle baterías viejas y nuevas.
No mezcle baterías alcalinas, estándar
o recargables.
Esta caja fuerte usa 4 pilas AA. Bajo uso normal,
las baterías durarán cerca de 1 año.
NOTA: Si las pilas están bajas, la luz indicadora
parpadeará en azul dos veces cuando inicie la
exploración. Reemplace con 4 nuevas pilas
alcalinas AA.
Ubique las baterías dentro de la caja fuerte. Abra
el comparmento de la batería en la parte
posterior de la puerta empujando la lengüeta en
la dirección de la flecha e instale las pilas. La luz
parpadeará en verde con un pido (si el sonido
está encendido) y las baterías están
instaladas correctamente.
INSTALACIÓN DE LA BATERÍA
NOTA: Debe volver a colocar la llave en la
posición de bloqueo antes de poder grabar
una huella digital, cerrar y cerrar la puerta.
NOTA: Esta llave también se ha proporcionado
en caso de que las pilas se agoten. Si pierde la
llave, puede comprar una llave de reemplazo
haciendo referencia al número de serie ubicado
debajo de la cubierta de la cerradura extraíble.
Consulte la sección al final de esta instrucción
con respecto a las llaves de reemplazo.
Botón de reinicio
DETALLE DE LA CAJA
FUERTE INTERIOR
Indice
Lingue:
Altri manuali Stack-On Sicuro
Stack-On
Stack-On PS-1514 Manuale utente
Stack-On
Stack-On QAS-450-B Manuale utente
Stack-On
Stack-On TD14-22-GP-E-S Manuale utente
Stack-On
Stack-On Buck Commander BC-18-MB-E-S Manuale utente
Stack-On
Stack-On PS-5-B-12 Manuale utente
Stack-On
Stack-On Buck Commander Manuale utente
Stack-On
Stack-On QAS-1512 Manuale utente
Stack-On
Stack-On TD-040-GP-E Manuale utente
Stack-On
Stack-On QAS-1000 Manuale utente
Stack-On
Stack-On E-24-MG-C-S Manuale utente
Stack-On
Stack-On PDS-1500 Manuale utente
Stack-On
Stack-On TS-20-MB-E-S Manuale utente
Stack-On
Stack-On A-64-MB-E-S-72 Manuale utente
Stack-On
Stack-On GCB-1522 Manuale utente
Stack-On
Stack-On PDS-1800-E Manuale utente
Stack-On
Stack-On PWS-1855-E Manuale utente
Stack-On
Stack-On E-8-MB-E-S Manuale utente
Stack-On
Stack-On PFWS-080-B-D-E Manuale utente
Stack-On
Stack-On QAS-1510-B Manuale utente
Stack-On
Stack-On PS-15-05-B Manuale utente
Manuali Sicuro popolari di altre marche
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente
Hornady
Hornady SnapSafe Trunk Safe II Manuale utente
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuale utente
Honeywell
Honeywell 5912 Manuale utente
Phoenix
Phoenix FS1280F Manuale utente
Phoenix
Phoenix SS0992K Scheda informativa del prodotto
