Stage right 360168 Manuale utente
PRODUCT INFORMATION PACKET
PRODUCT NAME: Stadium Pro Director’s Tower
Part Number: 360168
1
Table of Contents
Introduction………………………………………………………….…………………………………………..…………..
General Safety Rules……………………………………………………………………………………………..………
Symbols………………………………………………………………………………………………………………………
Technical Specifications………………………………………………………………………………………………….
Assembly Instructions.……………………………………………………………………………………………………
Maintenance……………………………...…………………………………………………………………………………
Customer Service Information…………………………………………………….………………………….…………
Introduction
The StageRight Stadium Pro Director’s Tower has been designed and manufactured with safety, performance
and dependability as top priorities, making it easy to operate and maintain.
The care you give your Director’s Tower will greatly determine your satisfaction with its performance and
service life. Careful study of this manual is encouraged to obtain a thorough understanding of your new
Director’s Tower and its functions and maintenance.
If your manual becomes lost or destroyed, StageRight will gladly provide you with a new copy. Should you
require additional information or assistance, please feel free to contact us at 1-800-438-4499.
BECAUSE STAGERIGHT CORPORATION MAINTAINS AN ONGOING PROGRAM
OF PRODUCT DEVELOPMENT AND IMPROVEMENT, WE RESERVE THE RIGHT
TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS
WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL THEM ON UNITS
PREVIOUSLY SOLD.
1
2
3
4
5
9
9
2
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in serious personal injury.
SAVE THESE INSTRUCTIONS
SET BRAKES ON THE DIRECTOR’S TOWER WHILE IN USE AND WHEN LEFT
UNATTENDED!
Stay clear of all pinch points. Keep hands away from pinch points.
Use on level surface.
Do not haul Stadium Pro Director’s Tower at speeds exceeding 5 mph. Hauling at
excessive speed may cause the tower to lose control, causing an accident or serious injury.
The Director’s Tower is for Off Road use only. The tower is intended to be used at
practice/game fields.
Do not ride on the Director’s Tower. The Director’s Tower is intended for stationary use
only. Failure to abide by this rule can cause serious personal injury.
Do not climb on the Director’s Tower. Access to the platform should only be accomplished
by use of the provided stair system.
Do not exceed platform weight limit of 700 pounds.
Save these instructions. Refer to them frequently and use them to instruct others who may
use the Director’s Tower.
Read the Product Information Packet. Failure to read the information packet is considered
a misuse of this equipment.
Become familiar with all caution and warning decals affixed to the field equipment
before use.
Never cover or deface caution/warning labels.
Make sure all rail clamps are secure before every use.
3
Symbols
Safety Alert: Precautions that involve your safety
Pinch Point Warning Label: Failure to keep hands away from pinch
points will result in personal injury
Read The Operator’s Manual: To reduce risk of injury, user must read
and understand operator’s manual before using this product
Do Not Climb Warning Label: To reduce risk of injury, do
not climb on field equipment. No acrobatics from platform.
For Off-Road Use Only Warning Label:Field equipment is not
intended or designated for roadway travel. Do not exceed 5 mph!
4
StageRight Corporation Technical Specifications
Stadium Pro Director’s Tower
Construction, Finish and Hardware
- Constructed of ASTM specified steel and aluminum
- Non – marking foam filled casters
- Zinc-plated hardware
- Baked on powder coat finish
Weight: 537 lbs
Dim A: 8 ft
Dim B: 4 ft
Dim C: 42 in
Dim D: 6 ft
- 4’x 8’ platform area
- 42” rail height for safety and
confidence
- 6’ platform height
- 6 ½” stair tread depth for quick,
sure footing
- Stairs stow inside tower frame
- 8” foam filled wheels roll easily
over terrain and won’t go flat
A
B
D
C
5
Assembly Instructions
1
2
Note: Assembly will require at least two people.
Lay out the understructure as shown. Having parts in approximate layout will be a great help during
assembly.
With the casters locked, raise the H-Sections. While holding the H-section upright, place the two shorter
connector bars on the lower horizontal tube as shown.
6
3
4
Next, attach longer connector bars to a lower, and an upper horizontal tube as shown. Make sure all frame
locks are locked.
Place the shortest connector between the two horizontal connectors, 2 ft. from one end.
2’
7
5
6
Place deck onto conical nodes. Assure the deck is full
y
p
laced on all four nodes.
Place rails on deck, to secure rails, turn handles clockwise. Make sure someone is holding the rail until
BOTH handles are tightened, and rail is fully secured to the deck. Repeat until all 6 rails are secured.
8
8
7
Place stair assembly on the top horizontal tube of the h-section containing the 2’ rail. Make sure the Frame
Locks are fully secured.
Stow the stairs by clipping them to the short crossbar on the base of the tower frame. To release frame
locks for stowing stairs or disassembly, push the finger of the lock upward and lift the lock off the tube.
9
CASTER BRAKES MUST BE ENGAGED BEFORE STANDING ON THE DIRECTOR’S TOWER!
CLIP THE SAFETY CHAIN WHILE THE DIRECTOR’S TOWER IS IN USE.
Engage Disengage
Indice
Altri manuali Stage right Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
