Stair Climbers Apollo Manuale utente
Apollo
Instruction Manual
Dolly Stair Lift
1Contents
1 Essential Safety Information 3
2 Technical Parameters 5
3 Operation 5
3.1 Loading the Dolly 5
3.2 Moving the Unit on Level Ground 7
3.3 Climbing Stairs 7
3.4 Descending Stairs 9
3.5 Folding the Unit 11
4 Maintenance 12
4.1 Charging the Battery Pack 12
4.2 Adjusting the Track Tension 13
4.3 Cleaning 13
4.4 Recycling 13
5 Troubleshooting 14
2
2 Essential Safety Information
The following symbols are used throughout this manual
Caution:
Failure to comply with this notice may result in injuries.
Note:
Failure to comply with this notice may result in damage to the
unit or premises.
Before Initial Operation
●Read the user manual and note all warnings and safety
instructions.
●Note technical data as lifting capacity cannot be exceeded.
●Check all electronic functions, safety brakes, and the position of the
climbing track.
General Usage Notes
●The operator of the unit must be trained.
●The operator should be physically capable of operating the unit.
●If the unit has been in temperatures at or below freezing for any
length of time, please wait at least an hour after moving the unit to
a warmer environment before operating the unit.
●Wear non-slip footwear and always operate with both hands.
●Practice operating without a load and at a low speed initially.
●The unit should not be used for the transportation of cargo.
●Ensure goods are safely secured with the attached safety strap.
●Do not use in rain, wet conditions, or on snow or ice.
●Do not use if the wheels or climbing track is broken or if any part of
the frame is loose.
●Do not use on escalators or travelators.
●Turn off the unit when it is being transported to different locations.
●Keep the plug-in elements dry.
●Protect the battery and charging cable by avoiding oil and grease.
3
●Do not use aggressive cleaning agents.
●Do not use high-pressure cleaning methods.
●Repairs may only be done by certified and experienced personnel
●Keep away from naked flames.
●The battery may interfere with other electronic device’s sensitive
electromagnetic fields (e.g. anti-theft systems in department
stores).
●Only genuine accessories should be used.
While Operating the Unit
●Never change settings while climbing or descending stairs.
●Never put any part of a body, especially feet, under the climbing
tracks.
●If the drive elements lock up, turn off the unit immediately.
4
3 Technical Parameters
Product size (L*W*H)
61-85*52*110-160 cm
Folded size (L*W*H)
110*52*34 cm
Packing size(L*W*H)
116*55*35 cm
Load limit
180 kg
Net Weight.
25 kg
Gross Weight
35 kg
4 Operation
Caution:
The unit should only be operated by trained personnel.
Caution:
The unit must be operated with two hands at all times.
Caution:
Loads must be secured with the supplied safety straps at all
times.
Note:
The battery should be fully charged prior to using the unit for
the first time.
4.1 Loading the Dolly
Unfold the rear operating handles
by depressing the red lock button,
and raising the handles until they
automatically lock into position.
5
Raise the main handle to a suitable
height by pulling the red bar
upwards and sliding the main
handle upwards.
There are three possible positions
for the main handle.
When the desired position is
reached, release the red bar.
Ensure the main handle is locked in
position by pulling upwards with
the red bar released.
6
Lock the wheels of the unit and
safely lift the load onto the
platform.
Once the load is balanced, secure
the load to the unit using the
supplied straps.
4.2 Moving the Unit on Level Ground
Push and guide the chair from
behind using the rear operating
handles or main handle tubes.
4.3 Climbing Stairs
Caution:
Never touch any part of the climbing tracks when the unit is
powered.
Caution:
Always ensure that all parts of the unit are securely locked into
place, especially the stair climbing tracks, before climbing stairs.
Position the unit at the base of the
stairs with the treads closest to the
stairs.
Lock the wheels on the unit.
Visually inspect the stairs to ensure
that there are no safety hazards,
including debris, ice, or water.
7
Deploy the climbing tracks by
releasing the red side locks and
pulling the tracks away from the
body of the unit using the black
bar.
Ensure the climbing tracks are as
close to the stairs as possible and
firmly locked in position.
Turn on the control unit by
pressing the POWER button.
Tilt the unit backward until the
climbing track is in contact with the
stairs.
8
Press and hold the UP button on
the control unit to begin moving.
The climbing speed can be adjusted
during movement by pressing the +
and – buttons.
When you have reached the top of
the stairs, release the UP button
and manoeuvre the unit completely
onto the landing. Return the unit to
an upright position.
Press the POWER button to turn off
the climbing tracks.
Unlock the wheels on the unit and
move to a safe distance from the
stairs before unloading the user.
4.4 Descending Stairs
Caution:
Never touch any part of the climbing tracks when the unit is
powered.
Caution:
Always ensure that all parts of the unit are securely locked into
place, especially the stair climbing tracks, before descending
stairs.
9
Position the unit at the top of the
stairs.
Lock the wheels on the unit.
Visually inspect the stairs to ensure
that there are no safety hazards,
including debris, ice, or water.
Deploy the climbing tracks (as
described above) and ensure they
are locked in place.
Turn on the control unit by
pressing the POWER button.
Tilt the unit backward until the
climbing tracks just come into
contact with the floor and carefully
push the unit towards the stairs
until the climbing tracks engage on
the stairs.
Press and hold the DOWN button
on the control unit to begin
moving.
10
Indice
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
