Standard PF-P330 Manuale utente
OPERATORS MANUAL
Standard Horizon PF-P330
Suction-Feed Paper Folder
Read this manual, and thoroughly
familiarize yourself with its
contents before operating or
servicing this equipment.
PF-P330/OM
1
Features on This Machine
This section explains the useful functions on this machine.
6 standard folding is performed easily
by pressing a button.
Using Pre-set function, the machine will stop
automatically when the required number of folding
is completed.
Off-setting the folded sheets is available.
Memory function will allow you to call the
job settings easily.
Various type of sheet including thin paper, thick paper,
and color copied coated paper can be folded.
STOP!
Page 20
Page 18
11" x 17"
2.898
5.827
2
Folding Procedures
1
2
3
4
5
6
7
1514
ABC
PowerSwitch
Fold Pattern Selecting Button.
Sheets set as the left illustration are folded
as the illustration to the below.
When performing the short folding, set the
sheet oppositely as the illustration to the
lower left part shows.
When performing the opposite direction folding,
pile the sheet up sisde down.
Sheet can be piled mazimum 50 mm.
Tighten the sheet guide locking knobs after fitting the guides.
There are 6 folding patterns shown below.
Sheet Size Selecting Button
Sheet Guide Locking Knob
End Stopper
Delivery Roller
Test Button
Start/Stop Button
Sheet Guide
Short Fold
Single Fold
Letter Fold
Parallel Fold
Accordion Fold
Short Fold
Gate Fold
Single Fold
Letter Fold
Parallel Fold
Accordion Fold
Short Fold
Gate Fold
ABC
ABC
ABC
ABC
ABC
Check the folded sheet. If there is a
folding skew, refer to [Troubleshooting]
and perform the adjustment.
¥When folding the specific number of sheets,
refer to [Set the Number of Fold (Pre-set Function)].
¥To quit folding, press the start/stop button again.
Refer to page 22.
Refer to page 16.
ABC
ABC
Start / Stop
Test Feed
Sheet Size
Folding Pattern
81/2"X 11"
81/2"X 14"
51/2"X 81/2"
11"X 17"
Start / Stop
Test Feed
Sheet Size
Folding Pattern
8
1/2
"
X
11"
8
1/2
"
X
14"
5
1/2
"
X
8
1/2
"
11"
X
17"
Start / Stop
Test Feed
Sheet Size
Folding Pattern
8
1/2
"
X
11"
8
1/2
"
X
14"
5
1/2
"
X
8
1/2
"
11"
X
17"
Folding Standard Size Sheet Folding Standard Size Sheet
Let’s fold the standard size (11"x17", 9"x11", 8.5"x11", 5,5"x8.5") sheet.
Turn on the power switch. Set the end stopper.
Set the delivery Roller.
Press the test button.
Press the start/stop button and start folding.
Select the fold pattern and sheet size.
Loosen the sheet guide locking knobs
and place the sheets on the center.
Then fit the sheet guides to the sheet.
View of This Operation Manual
This mark indicates the title or
page to refer.
Indicates the trick of the operation.
This number indicates the
operating order.
Chapter Title
Topic Title
Explanation
Indicates the summary for
operation described in
this page.
This section explains how to read this operation manual, and how to search the necessary topic.
Indicates the items that you have to be careful during operation.
Indicates the useful informations.
3
View of This Operation Manual
Contents
Contents
View of This Operation Manual ........................................................................ 2
Safety Precaution............................................................................................. 4
Accessories...................................................................................................... 7
Installation ........................................................................................................ 8
Machine Description ........................................................................................ 10
Folding Standard Size Sheet ........................................................................... 14
Setting the Number to Fold (Preset Function) ................................................. 18
Storing the Present Job Setting to Memory .....................................................20
Load the Memorized Job Setting from the Memory ......................................... 22
Folding Irregular Size Sheet ............................................................................ 24
Fold Line Shifts ................................................................................................28
Removing a Jammed Sheet............................................................................. 30
Error Message Appears on the Display ........................................................... 32
Sheet Can Not Be Folded Correctly ................................................................. 34
Sheet Jam Occurs Frequently .........................................................................36
Double Feeding Occurs Frequently ................................................................. 38
No Feeding Occurs Frequently ........................................................................ 39
Sheets Get Stain or Wrinkle ............................................................................. 40
Other Problems ................................................................................................41
Cleaning/Replacing the Roller .........................................................................42
Replacing the Gate Plate ................................................................................. 44
Cleaning the Sensor ........................................................................................ 46
Sheet Folding Mechanism ............................................................................... 48
Screen Description........................................................................................... 50
Major Specification........................................................................................... 52
Consumption Parts .......................................................................................... 53
Index ................................................................................................................54
Maintenance
Folding Procedures
Appendix
Other Functions
Before You Begin
Before You Begin
Troubleshooting
4
Safety Precaution
Safety precautions are indicated in this manual as follows:
The term WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Meaning of the Symbols
This symbol indicates there is a note which is important notandum when operating
this machine. Follow the note for safe operation.
This symbol indicates there is a prohibited action when operating this machine.
Do not perform the prohibited action.
This symbol indicates there is an essential procedure when operating this machine.
Follow the procedure for safe operation.
WARNING
CAUTION
Be careful for the Electrical Shock.
Ex-
ample
Do not dismantle.
Safety Precautions
The term CAUTION indicates a potentially hazardous situation which, if not avoided,
could result in damage to the machines. It may also be used to alarm against unsafe
practices.
- Please read and understand all safety instructions which include the term WARN-
ING and CAUTION. If these safety instructions are ignored, personal injury may
result.
- Horizon International Inc. cannot anticipate every possible situation that might
involve a potential hazard. The instructions in this manual and warning labels on the
machine are therefore not all-inclusive.
- All equipment shall be locked out or tagged out to protect against accidental or
inadvertent operation when such operation could cause injury to personnel. Do not
attempt to operate any switch, valve, or other energy isolating device when it is
locked or tagged out.
- Do not operate the machine when any covers are removed.
- Some of the drawings in this manual show the machine uncovered to help in ex-
plaining the details inside the machine.
Ex-
ample
5
Safety Precaution
Warning for Installation
Warning for Operation
Keep your hands and fingers
off the raising table. Other-
wise, raising table can cause
severe personal injury.
WARNING
WARNING
Do not do the starburst connec-
tion. Otherwise, the fire or
electrical shock may be caused.
Do not use the machine in
incorrect voltage.
Keep the safety function active,
or do not dismantle the ma-
chine. It can cause severe
persinal injury.
Keep your hands and fingers off
inside of the machine. Other-
wise, moving parts can cause
severe personal injury.
Do not remove the cover.
Otherwise, electrical shock
can cause severe personal
injury.
Be careful not to pinch your
hand when returning the
buckle fixing lever.
Make sure to connect the
earth.
Before You Begin
200V
115V
6
Safety Precaution
Caution for Operation
Caution for Maintenance
Turn off the power switch before cleaning or
replacing each part.
CAUTION
When turning off the power switch and on again,
wait a dozen of seconds. Otherwise, the
P.C.board may be damaged.
WARNING
Disconnect the power cable from receptacle
before moving the machine. Otherwise, the
power cable may be damaged and may
cause the fire or electrical shock.
OFF
OFF ON
Keep your fingers and hands off the rotating
stopper adjusting knobs.
7
Accessories Accessories
Pump 1 pc Delivery Roller 1 pc Support Table 1 pc
Power Cable 1 pc Cleaning Brush 1 pc Hose Band 2 pcs
Operation Manual 1 pc End Stopper 1 pc
Before installing PF-P330, check that there are following items inside the box.
Before You Begin
Operation Manual
8
Raise the buckle section and return the buckle
fixing lever.
Attach the delivery roller.
Connect the hose to the pump.
Installation
- Attach the delivery roller as
shown in the figure at left.
1
2
Buckle Section
Buckle Fixing Lever
Delivery Roller
Pump Cover
Hose Band
This section explains how to install PF-P330.
Be careful not to pinch
your finger by buckle
fixing lever.
WARNING
Upper Hose
- Remove seven screws of the
pump cover using the driver, then
attach the hose to the pump
using the hose band.
Fit the upper hose to the upper
part of pump.
Upper hose is for vacuuming,
and lower hose is for blowing.
Indice
