Star Micronics SF-10HA Manuale utente

USER’S MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE UTENTE

SF-10HA

80825760

NOTICE

●

without STAR’s express permission is forbidden.

●

The contents of this manual are subject to change without notice.

●

All efforts have been made to ensure the accuracy of the contents of this manual at the

time of printing. However, should any errors be detected, STAR would greatly appreciate

being informed of them.

●

The above notwithstanding, STAR can assume no responsibility for any errors in this

manual.

ANMERKUNGEN

●

bedarf der schriftlichen Genehmigung durch STAR.

●

Inhaltliche Änderungen vorbehalten.

●

Diese Bedienungsanleitung wurde vor Drucklegung mit gebührender Sorgfalt überprüft.

Sollten sich dennoch Fehler eingeschlichen haben, bittet STAR um Benachrichtigung.

●

STAR übernimmt keine Gewähr für Betriebsstörungen, die sich aus etwaigen Fehlern in

dieser Bedienungsanleitung ergeben.

REMARQUE

●

forme que ce soit, est strictement interdite sans l’autorisation expresse de STAR.

●

Le contenu de ce mode d’emploi est sujet à modiﬁcation sans préavis.

●

Tous les efforts ont été faits pour assurer la précision du contenu de ce manuel au

moment de l’impression. STAR serait très heureux d’être informé des erreurs qui pour-

raient y être découvertes.

●

En dépit de la remarque ci-dessus, STAR n’assume aucune responsabilité pour les

erreurs de ce manuel.

AVVERTENZA

●

Tutti i diritti sono riservati. La riproduzione di questo manuale, anche parziale, in

qualsiasi forma e senza preventiva autorizzazione scritta della STAR, è proibita.

●

La STAR si riserva il diritto di apportare modiﬁche in qualunque momento, senza speci-

ﬁcarne i motivi.

●

È stato fatto il possibile per assicurare l'accuratezza del contenuto di questo manuale,

ﬁno al momento della stampa. Si prega di communicare eventuali errori alla STAR.

●

La STAR non si assume alcuna responsabilità per possibili errori riscontrati in questo

manuale.



TABLE OF CONTENTS

SF-10HA Automatic Sheet Feeder

Unpacking 1

Preparing the printer 2

Installing the automatic sheet feeder 2

Loading paper 4

Feeding a single sheet of paper 6

Operational Precautions 7

Cleaning 7

Troubleshooting 8

Speciﬁcations 9

INHALTSVERZEICHNIS

Automatischer Einzelblatteinzug SF-10HA

Auspacken 10

Vorbereitung des Druckers 11

Einbau des automatischen Einzelblatteinzugs 11

Papier einlegen 13

Einziehen eines Einzelblatts 15

Vorsichtsmaßregeln zum Betrieb 16

Reinigung 16

Fehlersuche 17

Technische Daten 18

TABLE DES MATIERES

Introducteur automatique de feuilles SF-10HA

Déballer le SF-10HA 19

Préparer l’imprimante 20

Installer l’introducteur automatique de feuilles 20

Charger du papier 22

Introduire une seule feuille de papier 24

Précautions relatives à l’utilisation 25

Nettoyer l’introducteur automatique de feuilles 25

Guide de dépannage 26

Spéciﬁcations 27

INDICE

Caricatore automatico fogli singoli SF-10HA

Disimballaggio 28

Preparazione della stampante 29

Installazione del caricatore automatico fogli singoli 29

Caricamento della carta 31

Inserimento di un singolo foglio di carta 33

Precauzioni d’uso 34

Pulizia 34

Ricerca e soluzione dei problemi 35

Speciﬁche tecniche 36

English

SF-10HA Automatic Sheet Feeder

The SF-10HA Automatic Sheet Feeder makes it possible to automatically feed

paper into your printer. This manual describes the operational procedures for

using the SF-10HA.

Unpacking

❏

After unpacking the contents of the carton, check to make sure you have all

five items. If anything is missing, contact your dealer.

Note:

The automatic sheet feeder is protected by packing material and tape during

shipping. Be sure to remove all of the protective material and tape before use.

Important!

The following procedure requires you to break out two small pieces in order to

expose mechanisms that the automatic sheet feeder must connect with to

operates properly. Make sure that you perform this procedure exactly as

described below.

Automatic sheet feeder

Hopper attachment

User’s Manual

Stacker attachment

SF-10HA Automatic Sheet Feeder

Preparing the printer

❏

Enter the printer’s EDS Mode and make the setting that tells the printer that

the ASF is installed (for example, BankA, Switch 4 is OFF on LC-1021

model). Refer to the User’s Manual that comes with the printer for details

on using the EDS Mode.

❏

Unplug the printer from its AC power source.

❏

Open the mute cover of the printer.

❏

Push the release lever back to the cut-sheet position.

❏

Open the rear cover by pushing it back so the cover swings back and down.

❏

Break away the two small pieces from the rear cover as shown in the

illustration above.

Repeatedly press down where indicated by the arrows a number of times

until the tabs weaken and the pieces break free.

❏

Close the rear cover.

Installing the automatic sheet feeder

❏

If you have not already done so:

✓

Make sure that the printer is unplugged from its AC power source.

✓

Open the mute cover and rear cover of the printer.

✓

Push the release lever back to the cut-sheet position.

✓

Remove the small pieces from the rear cover.

✓

Close the rear cover.

See the procedure under “Preparing the printer” in the previous section for

details.

Mute cover

Rear cover

Release lever

Installing the automatic sheet feeder

English

❏

Lower the auto sheet feeder into the printer so the two round tabs on its

arms enter into grooves in the printer mechanism that was exposed when

you removed the two small pieces (see “Preparing the printer” in the

previous section). The top of the automatic sheet feeder angled towards the

front of the printer when you do this.

❏

Swing the back of the automatic sheet feeder down, and press down gently

until it settles securely in place.

❏

Close the mute cover.

❏

Insert the two hopper attachments on top of the hopper support as shown

below.

❏

Insert the stacker attachment into the holes on the paper tray cover.

Hopper attachment

Stacker attachment

SF-10HA Automatic Sheet Feeder

Loading paper

❏

Pull the paper tray cover of the automatic sheet feeder forward.

❏

Align the left paper guide with the scale mark that matches the size of the

paper you are using.

For A4, B5 and legal, align the left paper guide with the A4 mark. For US

letter paper, align the paper guide with the LT mark.

❏

Adjust the right paper guide so there is enough space to insert the paper.

❏

Pick up a stack of paper with both hands and fan through it with your

thumb. This prevents paper from sticking together when it is fed by the

automatic feeder.

Note:

The auto sheet feeder can hold about 50 sheets of 64g/m

(30 sheets of 80g/m

)

paper.

❏

Tap all four edges of the stack of paper on a table or desk to make sure they

are smooth and even.

Paper guides

Loading paper

English

❏

Carefully place the paper into the paper tray against the stationary paper

guide on the right side. Make sure that the left and right edges of the paper

stack are under the retaining clips inside the tray.

❏

Close the paper tray cover.

❏

Make sure that the release lever is pushed back to the cut-sheet position.

You are now ready to print with the auto sheet feeder.

Paper guide

Retaining clip

SF-10HA Automatic Sheet Feeder

Feeding a single sheet of paper

Use the following procedure to manually feed a single sheet of paper while the

auto sheet feeder is installed.

❏

Insert the paper into the slot behind the stacker as shown below.

For any paper size of A4, B5 and legal, align the paper with the A4 mark

when you insert it. For US letter paper, align the paper with LT mark.

❏

Press the control panel’s

ON LINE

button to put the printer off line.

❏

Press

FORM FEED

button to feed the paper into the printer.

LTA4

Indice

Lingue:

Altri manuali Star Micronics Stampante

Star Micronics

Star Micronics TSP043E Series Manuale utente

Star Micronics

Star Micronics LaserPrinter4 Manuale utente

Star Micronics

Star Micronics TSP700 Series Manuale utente

Star Micronics

Star Micronics LC-4511 Manuale utente

Star Micronics

Star Micronics DP8340 Series Istruzioni operative

Star Micronics

Star Micronics TSP800 Series Manuale utente

Star Micronics

Star Micronics NX-1020 Manuale utente

Star Micronics

Star Micronics SP200 Series Manuale utente

Star Micronics

Star Micronics TSP400 Series Manuale utente

Star Micronics

Star Micronics futurePRNT TSP100 Manuale utente

Star Micronics

Star Micronics SP500 Series Manuale utente

Star Micronics

Star Micronics NX-10 Manuale utente

Star Micronics

Star Micronics MP100 Manuale

Star Micronics

Star Micronics TSP 654IID Manuale utente

Star Micronics

Star Micronics Star SCP700 Series Manuale operativo e di manutenzione

Star Micronics

Star Micronics TSP100ECO Manuale utente

Star Micronics

Star Micronics TSP600 Series Manuale operativo e di manutenzione

Star Micronics

Star Micronics TSP1000 Series Istruzioni per l'installazione

Star Micronics

Star Micronics TSP043 Series Manuale utente

Star Micronics

Star Micronics SB-10 Manuale utente

Star Micronics

Star Micronics LC-15 Manuale utente

Star Micronics

Star Micronics SP500 Series Manuale utente

Star Micronics

Star Micronics XB-2425 Manuale utente

Star Micronics

Star Micronics NX-1000 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente