Configure
Setting Method
Configuration from display screen (offline)
The method for configuring the settings from the display is explained in the
following steps.
1Select “Configure”on the display and open the program.
2Select an option and display the setting details.
3After changing the settings, press “Save”to register the changes.
Settings are saved for each page. Before changing screens, press “Save”
to ensure the changes are registered.
4After completing the changes, press “Exit” to close the setting screen.
* Please restart the printer if chipset setting of USB WiFi was changed.
Configuration from a web browser connected to network (online)
Configuring the settings from a peripheral PC’s web browser connected through
the network is explained in the following steps.(*1), (*2)
1Connect a network cable to the AsuraCPRNT and power on the unit.
2Confirm the IP address displayed in the bottom right corner of the display.
3Enter the address in your PC’s web browser and access the page, then start
the Configure application.
Please ensure your PC and AsuraCPRNT are connected on the same
network
A username (default:admin) and password (default:thermal) will be
required to establish the connection. The password can be changed by
using the configuration utility.
Confirmed compatible web browsers: Internet Explorer, Google Chrome,
Safari, Firefox.
4Select an option and display the setting contents.
5After changing the settings, press “Save”to register the settings.
Settings are saved for each page. Before changing screens, press “Save”
to ensure the changes are registered.
6After all changes have been made, press the “Exit” button to close the
program.
* Please restart the printer if chipset setting of USB WiFi was changed.
Star Micronics Copyright 2013-2015
5
