starlight WF-1690BL Manuale utente
Star-Light WF-1690BL...............................................................EN
Mist Fan
Instruction Manual
11
The installation instructions for WF-1690BL
Parts:
1. Misting Board
2. Front Grill
3. Misting Board Screws
4. Blades Lock Net
5. Blades
6. Grill Lock Net
7. Rear Grill
8. Motor
9. Motor Shell
10. Grill Ring
11. Motor Holder
12. Connection Holder
13. SS Holder
14. Power Connection line electrical
15. Fixed Screw
16. Water Tank
17. Main Body
18. Base
19. Castor
20. Base Lock Nut
21. Misting Tube
22. Control Panel
23. Remote Controller
24. Decorate Panel
25. Water Indicator
22
Assembling the appliance:
- Install the main body (17) into the base (18) , and use the base lock nut(20) to
screw on the base tight.
- Power connection line (14) link together, and SS holder (13) into main body
and fasten by fixed screw (15).
- Install the rear grill (7) and the grill circle on the motor, and use grill lock net
(6) to fasten.
- Install the blades (5) on to the motor axis, and use the grill lock net (4) to
fasten.
- Install Misting board (1) on the front grill (2) and screw it (3).
- Put the front grill (2) and rear grill (6) together, and screw to fasten by grill
ring(10).
- Pull the mist tube (21) through into misting board (1).
Safety advice and warnings
- This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
- Cleaning and user maintenance shall not be made by children unless
they are supervised.
- This appliance is not a toy. Children should be supervised to ensure
that they do not play with the appliance. Applicable if the user has to
realize any installation operation (for example: assembly the grill…):
- Ensure that the fan is switched off from the supply mains before start any
installation or assembly operation. Mandatory if the guard has to be removed
for cleaning purposes
- Disconnect the appliance from the mains before undertaking any cleaning
task. Ensure that the fan is switched off from the supply mains before
removing the guard. Choose the adequate sentence/s depending of after
service kind:
- If the connection to the mains has been damaged, it must be re-placed,
take the appliance to an authorized technical support service.
33
- Do not attempt to disassemble or repair the appliance by yourself in order
to avoid a hazard.
- Ensure that the voltage indicated on the rating label matches the mains
voltage before plugging in the appliance. Choose the adequate sentence/s
depending of kind of appliance:
- Connect the appliance to a socket that can supply a minimum of
10 amperes.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance near bathtubs, showers or swimming pools.
- Do not use the appliance with damp hands or feet, or when barefooted.
- Do not force the power cord. Never use the power cord to lift up, carry or
unplug the appliance.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled cables increase the
risk of electric shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for signs of damage, and if the
cord is damaged, the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or exposed to moisture. If water
gets into the appliance, this will increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance’s moving parts while it is operating.
- The appliance’s plug must fit into the mains socket properly. Do not alter
the plug. Do not use plug adaptors.
- The appliance must be used and placed on a flat, stable surface.
- Do not use the appliance if the cable or plug is damaged.
- CAUTION: In order to prevent overheating do not cover the appliance.
- CAUTION: Maintain the appliance dry.
Use and care:
- Fully unroll the appliance’s power cable before each use.
- Do not use the appliance if the on/off switch does not work.
- Use the appliance handle/s, to catch it or move it.
- Do not use the appliance if it is tipped up and do not turn it over.
- Do not turn the appliance over while it is in use or connected to the
mains. Choose the adequate sentence/s depending of kind of
appliance. Not include if a sentence with the same meaning was
included previously
44
- Unplug the appliance from the mains when not in use and before
undertaking any cleaning task.
- This appliance is for household use only, not industrial use.
- This appliance should be stored out of reach of children and/or the
disabled.
- Make sure that dust, dirt or other foreign objects do not block the fan
grill on the appliance.
- Keep the appliance in good condition. Check that the moving
parts are not misaligned or jammed and make sure there are no
broken parts or anomalies that may prevent the appliance from
operating correctly.
- Never leave the appliance connected and unattended if is not in use.
Installation
- Be sure to remove all packaging material from inside the appliance. Applicable
if the user has to realize any installation operation
(for example: assembly the grill…):
- Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
- The appliance should be used with its base fitted.
Operating the remote control:
- Put 2 pcs battery AAA (1.5V) inside, notice plus or minus pole.
- Close the lid of the remote control
- Remove the battery if you are not using it for a long time period.
55
Filling water:
- Push the water tank upward and remove the water tank.
- Unscrew the filler cap and fill with water.
- Screw the filler cap and put the water tank back in position.
- CAUTION: The temperature of water should not be 40ºC above.
Operating the ice box:
- Turn off the appliance and pull out plug from the electrical outlet.
- Take out water tank, and then take out the ice box from appliance.
- Put the ice box into refrigerator for freezing
- After freezing, put the ice box inside and make temperature lower.
- It can be reused.
Operating aroma tray:
- Take aroma case out on the body rear shell.
- Put several drops aroma liquid into the aroma case, and put the aroma case
back in position.
- Slowly the aroma evaporates and be full of room while fan working.
Instructions for use
Before use:
- Make sure that all the product's packaging has been removed.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- To avoid a fierce startup of the fan, it is advisable to start off from
the lowest speed position and, once the fan has been switched on,
progressively increase the speed to the desired position.
Fan function:
- Insert the power cord into plug socket and hear a "beep" sound after
power is connected work.
- Use remote control point to receive window and push any button,
various function work accordingly.
66
ON/OFF button:
- Firstly push ON/OFF button, the indicator light is on.
- Secondly push ON/OFF button, the wind speed is in the low level by default.
Meanwhile, the indoor temperature shows on the panel. Thirdly push ON/OFF
button, all stop work and indicator lights off.
Speed button:
- Firstly push speed button, the wing speed is in the medium level.
- Secondly push speed button, the wind speed is in the high level.
- Thirdly push speed button, the wind speed returns to the low level.
Mode button:
- Natural mode → Sleep mode → Normal mode
Natural mode : The wind imitate the blow of natural wind based on strong and
soft wind.
Sleep mode: the first half hour after running as strong and soft natural wind,
it becomes med natural wind and the second half hour it changes to soft
natural wind until the end of preset time. Normal mode: The wind blow
based on Low/Med/High speed.
Mist function:
- Mist function can be used separately, or worked together with fan.
- Firstly push Mist button, the mist spray in low volume.
- Secondly push Mist button, the mist spray in medium volume.
- Thirdly push Mist button, the mist spray in high volume.
Note:
- Water indicator ( Blue, just with water) ( Red, just no water)
Oscillation function:
- The oscillation function makes it possible to direct the flow from the
apparatus so that it automatically alternates over a range of 75º
- To activate this function, push the OSC button. The yellow light of OSC on
.
- Press it again to stop oscillation, yellow light of OSC off.
Ionizer function:
- Mist function can be used separately, or worked together with
the fan.
- The fan can generate negative ions generated by the ionizer emanate from
the unit throughout the room and cause dust, pollen, pet dander etc to clump
together and drop out of the air.
- Push the ion button, green light of Ion function on.
- Push it again to stop working, the green light of Ion function off.
77
Mosquito repellent function
- Mosquito repellent function can be used separately, or worked together
with the fan.
- Put the mosquito repellent tablet (not included with the product) into its
hole on the body rear shell.
- Push Mosquito button red light of mosquito repellent on,to avoid the
mosquitoes annoy.
- Push it again to stop working, red light of mosquito repellent off.
Note:
- Turn off the power when you replacing the mosquito repellent tablet, wait for 10
minutes then replacement in order to avoid burns or electric shock.
- Do put the mosquito repellent tablet in contact with eyes or mouth.
If tablet in the mouth, wash mouth and seek medical care soon.
Timer function:
- The appliance’s operating time can be controlled.
- It can be set the fan running time between 1-12hours and
switches the fan off after preset time,
- To set a timer of 1 hour, push Timer button one time. Meanwhile, the indoor
temperature display is replaced by timer display of 01H.
- To set 12 hours of running time, you need to press 12 times and the number of
hours displayed on the panel will change every time.
- After setting 12 hours timer, push TIMER button again, timer is cancelled. Once
timer cancelled, the indoor temperature will be displayed on the panel.
- While setting timer, the timer hour and the indoor temperature will be displayed
on the panel every 5 seconds by turn. And the number of hours displayed on
the panel will decrease per hour.
- The time programmed or remaining time will appear on the display.
Once you have finished using the appliance:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
- Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base PH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to the
inner parts of the appliance.
- Never submerge the appliance in water or any other liquid or place it under
running water.
- If the appliance is not in good condition of cleanliness, its surface may
degrade and inexorably affect the duration of the appliance’s useful life and
could become unsafe to use.
88
Indice
Lingue:
