StarTech.com S2510U33USM Manuale utente

Manual Revision: 02/24/2016

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

S2510U33USM

USB 3.0 SATA USM™ SSD/HDD

Adapter and Enclosure

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Hard Drive Installation ..........................................................................2

Interfacing with S2510U33RUSM 5.25” Installation Bay.............................................................. 2

How to Use ..............................................................................................3

Disconnecting the Hard Drive.............................................................................................................. 3

Technical Support ..................................................................................5

Warranty Information............................................................................5

Instruction Manual

Introduction

Packaging Contents

• 2.5 in. USB Enclosure

• USM to USB 3.0 Interface Adapter

• USB 3.0 Micro USB Cable

• Instruction Manual

System Requirements

• 1x 2.5 in. SATA Hard Drive

• USB 3.0 (Backwards Compatible with USB 2.0 or 1.1) Compatible System

Instruction Manual

WARNING! Hard drives and storage docks require careful handling, especially when

being transported. If you are not careful with your hard disk, lost data may result.

Always handle your hard drive and storage device with caution. Be sure that you

are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

Hard Drive Installation

1. With the USB 3.0 to USM adapter removed from the S2510U33USM USM Enclosure,

remove the two screws on either side of the USM port, to remove the SATA plate.

2. Slide the inner tray forwards out of the housing.

3. To install the hard drive start by placing one side into the tray then lower the other

size into place until the drive snaps into place.

4. Install the tray back into the housing and replace the back plate ensuring that the

plate is aligned to the SATA connector.

5. Fix the two screws on the SATA plate back into place.

Interfacing with S2510U33RUSM 5.25 in. Installation Bay

Mount Drive

With the USB 3.0 to USM adapter removed from the S2510U33USM USM Enclosure,

gently slide the USM Enclosure Drive into the slot provided by the 5.25 in. USM drive

tray (S2510U33RUSM), until you feel full resistance.

Remove Drive

Press the drive eject button on the 5.25 in. USM drive tray (S2510U33RUSM). The USM

Enclosure will slide away from the installation bay slightly. Grasp the Enclosure with

your ngers and slide the drive the rest of the way out.

NOTE: It is important to eject or unmount the hard drive from your computer system

before physically removing the drive. See How to Use - Disconnecting the Hard Drive

section for instructions.

Instruction Manual

Interfacing with USB Controller

1. Connect the USM to USB 3.0 interface adapter to the enclosure through the USM

port.

2. Connect the USB 3.0 cable from the USB port on the adapter to an available USB 3.0

port on your computer system.

How to Use

Connecting the Hard Drive

Once the enclosure has been attached to a computer, the drivers will install

automatically, and the inserted drive will be accessible as though it were installed

within the system.

Prior to using the drive, it will need to be formatted according to your operating

system requirements. To format your newly attached hard drive, or create partitions,

please consult the documentation that accompanied your operating system at the

time of purchase.

LED Indicator

The hard drive enclosure features an LED indicator that you can use to monitor drive

activity. The LED will ash while the hard drive is being accessed. Do not remove the

enclosure from the host computer while the LED is ashing, as it could damage the

drive or the enclosure, resulting in data loss.

Disconnecting the Hard Drive

Windows

1. Click the Safely remove Hardware and Eject Media icon, located in the task bar.

2. Click the Mass Storage Device from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

NOTE: Removing the connected drive prior to receiving notication that it is safe to

do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please disconnect the enclosure from the

computer by removing the USB connection.

Instruction Manual

Mac OS X

1. To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive.

2. Once all of the windows are closed, click on the USB storage icon on the desktop,

and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the enclosure/drive from the computer.

Initializing the Hard Drive

1. If the SATA Hard Drive is blank it may need to be initialized and formatted before

use. From the main Windows desktop, right-click My Computer (Computer in Vista/

7 / 8), then click Manage. In the new Computer Management window, click Disk

Management from the left window panel.

2. A dialog window should automatically appear, asking you to initialize the drive.

Depending on the version of Windows that you’re running, it will give you the

option of either creating an MBR or GPT disk. GPT (GUID partition) is required for

drives larger than 2TB but is not compatible with some older operating systems,

while MBR is supported by newer and older operating systems.

3. Once initialized, locate the disk labeled Unallocated (check the listed hard drive

capacity to conrm it’s the correct hard drive) and then right-click in the section that

says Unallocated and click New Partition.

4. Complete the on-screen instructions to create the partition.

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Indice

Altri manuali StarTech.com Adattatore

StarTech.com

StarTech.com USB2PS2 Manuale utente

StarTech.com

StarTech.com US2GA30 Manuale utente

StarTech.com

StarTech.com PEXESAT32 Manuale utente

StarTech.com

StarTech.com US1GA30SXSC Manuale utente

StarTech.com

StarTech.com 25SATSAS35HD Manuale utente

StarTech.com

StarTech.com USBA-BLUETOOTH-V5-C2 Manuale utente

StarTech.com

StarTech.com USB32HDE Manuale utente

StarTech.com

StarTech.com 102B-USBC-MULTIPORT Manuale utente

StarTech.com

StarTech.com PEX2S552B Manuale utente

StarTech.com

StarTech.com USB32HDVGA Manuale utente

StarTech.com

StarTech.com PEX433WAC11 Manuale utente

StarTech.com

StarTech.com 25S22M2NGFFR Manuale utente

StarTech.com

StarTech.com USB32HDDVII Manuale utente

StarTech.com

StarTech.com SP122DP2HD Manuale utente

StarTech.com

StarTech.com DP2DVID Manuale utente

StarTech.com

StarTech.com ICUSB2321FIS Manuale utente

StarTech.com

StarTech.com DKT31CMDPHPD Manuale utente

StarTech.com

StarTech.com MDVIVGAMF Manuale utente

StarTech.com

StarTech.com ICUSB2321X Manuale utente

StarTech.com

StarTech.com CDP2HD4K60SA Manuale utente

StarTech.com

StarTech.com PEXM2SAT32N1 Manuale utente

StarTech.com

StarTech.com 127B-USBC-MULTIPORT Manuale utente

StarTech.com

StarTech.com USB32HD2 Manuale utente

StarTech.com

StarTech.com PCI220USB Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente