StarTech.com S2510BMU33CB Manuale utente

Manual Revision: 10/23/2013

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

S2510BMU33CB

USB 3.0 2.5” SATA Enclosure w/UASP &

Built-in Cable

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Package Contents ..................................................................................................................................... 1

System Requirements.............................................................................................................................. 1

Product Diagram ....................................................................................1

Installation ..............................................................................................2

Hardware Installation .............................................................................................................................. 2

How to Use ..............................................................................................4

Connecting the Hard Drive.................................................................................................................... 4

Powering the Drive Enclosure .............................................................................................................. 4

LED Indicator .............................................................................................................................................. 4

Disconnecting the Hard Drive.............................................................................................................. 4

Initializing the Hard Drive ...................................................................................................................... 5

Specications..........................................................................................7

Technical Support ..................................................................................8

Warranty Information............................................................................8

Instruction Manual

Product Diagram

Introduction

Package Contents

• 1x USB 3.0 2.5” SATA Enclosure

• 1x Instruction manual

System Requirements

• Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)

• 2.5” SATA hard drive or solid state drive (9.5mm height)

• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8 (32/64-bit), or

Apple® Mac® OS 9.x/10, or Linux®

Attached USB

cable

Instruction Manual

Installation

Hardware Installation

WARNING! Hard drives and storage enclosures require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may

result. Always handle your hard drive and storage device with caution. Be sure that

you are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

1. Open the enclosure by removing the screws from either side of the bottom piece of

the enclosure using a small Phillips® head screw driver.

2. Slide the bottom cap o.

Instruction Manual

3. Connect the the 2.5” SATA Hard Drive by sliding it into the enclosure connector rst.

4. Replace the cap, and insert the removed screws using the small Phillips head screw

driver.

5. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to

a USB port on the host computer system using the included cable.

Instruction Manual

How to Use

Connecting the Hard Drive

Once the enclosure has been attached to a computer, and the OS has auto installed

the necessary software, the drive will be accessible as though it were installed within

the system.

Prior to using the drive, it will need to be formatted according to your operating

system requirements. To format your newly attached hard drive, or create partitions,

please consult the documentation that accompanied your operating system at the

time of purchase.

Powering the Drive Enclosure

The hard drive enclosure requires no external power supply, as it is capable of receiving

enough power from the USB Bus to which it is connected.

LED Indicator

The hard drive enclosure oers an LED indicator, to enable you to monitor drive

activity. When the enclosure is powered, the LED will illuminate. While the hard drive

is being accessed, the LED will blink. Do not remove the enclosure from the host

computer while the LED is ashing, as it could damage the drive or the enclosure,

resulting in data loss.

Disconnecting the Hard Drive

Windows

1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.

2. Select “Eject iSO M3” from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

Note: Removing the connected drive prior to receiving notication that it is safe to

do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please disconnect the enclosure from the

computer by removing the USB connection.

Instruction Manual

Mac OS X

To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive. Once all windows are closed, click on the

USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the enclosure/drive from the computer.

Initializing the Hard Drive

1. If the SATA Hard Drive is blank it may need to be initialized and formatted before

use. From the main Windows desktop, right-click on “My Computer” (“Computer” in

Vista/ 7 / 8), then select Manage. In the new Computer Management window, select

Disk Management from the left window panel.

2. A dialog window should automatically appear, asking you to initialize the drive.

Depending on the version of Windows, it will give you the option of either creating

an “MBR” or“GPT” disk. GPT (GUID partition) is not compatible with some older

operating systems, while MBR is supported by newer and older operating systems.

Instruction Manual

3. Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard

drive capacity to conrm it’s the correct hard drive) and then right-click in the

section that says “Unallocated” and select “New Partition”.

4. Follow the on screen prompts to initialize the drive in the format of your choice.

Instruction Manual

Specications

Host Interface USB 3.0

External Connectors

1 x 15 pin SATA Power female

1 x 7 pin SATA Data male

1 x USB 3.0 type Micro-A male

Maximum Data Transfer Rate USB 3.0: 5 Gbit/s

Compatible Operating Systems

Windows 2000/XP/Server 2003/Vista/

Server 2008 R2/7/8 (32/64-bit), Mac OS

9/10, Linux

Altri manuali per S2510BMU33CB

Indice

Altri manuali StarTech.com Allegato

StarTech.com

StarTech.com S2510BPU337 Manuale utente

StarTech.com

StarTech.com 4POSTRACK36 Manuale utente

StarTech.com

StarTech.com IDECASE35F Manuale

StarTech.com

StarTech.com IDECASE35NAS Manuale utente

StarTech.com

StarTech.com SAT3510BU3 Manuale utente

StarTech.com

StarTech.com DRW150ATA Manuale

StarTech.com

StarTech.com S3510BMU33 Manuale utente

StarTech.com

StarTech.com SAT3520U3SR Manuale del sistema

StarTech.com

StarTech.com S354UFER Manuale utente

StarTech.com

StarTech.com SMS2BU31C3R Manuale utente

StarTech.com

StarTech.com SECTBLTPOS2 Manuale utente

StarTech.com

StarTech.com S351BU313 Manuale utente

StarTech.com

StarTech.com SAT3520U2R Manuale utente

StarTech.com

StarTech.com 2636CABINET Manuale utente

StarTech.com

StarTech.com DRW110ATA Manuale

StarTech.com

StarTech.com S2510BPU33 Manuale utente

StarTech.com

StarTech.com S2510BU3ISO Manuale utente

StarTech.com

StarTech.com InfoSafe UNI3510U2E Manuale utente

StarTech.com

StarTech.com RK1219WALH Manuale utente

StarTech.com

StarTech.com RK2537BKM Manuale utente

StarTech.com

StarTech.com UNI3510U2 Manuale utente

StarTech.com

StarTech.com S251BU31C3CB Manuale utente

StarTech.com

StarTech.com InfoSafe IDECASE25OTG Manuale utente

StarTech.com

StarTech.com S2510BU3PW Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente