StarTech.com S251BPU313 Manuale utente

Manual Revision: 02/01/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/S251BPU313.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

S251BPU313

USB 3.1 (10Gbps) Tool-Free Enclosure

for 2.5” SATA Drives

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Introduction............................................................................................1

Packaging contents.................................................................................................................................. 1

System requirements............................................................................................................................... 1

Product diagram ....................................................................................2

Install a drive...........................................................................................3

Connect a drive to your computer ......................................................3

Prepare a drive for use ..........................................................................3

Windows OS................................................................................................................................................ 3

Mac OS .......................................................................................................................................................... 4

Disconnect a drive .................................................................................5

Windows....................................................................................................................................................... 5

Mac OS .......................................................................................................................................................... 5

About the LED indicator........................................................................5

Technical support...................................................................................6

Warranty information............................................................................6

Instruction manual

Introduction

You can use the S251BPU313 to create a fast and portable external storage solution

for desktops, laptops, or netbooks. When you use the S251BPU313, you can take

advantage of new laptops and desktops that come equipped with USB 3.1 Gen 2

(10Gbps) connectivity. Engineered with a durable and lightweight housing, the

enclosure tucks easily into a laptop bag or carrying case for portable storage. The

enclosure doesn’t require any tools to install, so you can quickly install your drives.

Packaging contents

• 1 x USB 3.1 to 2.5 in. SATA HDD enclosure

• 1 x drive cushion

• 1 x USB cable

• 1 x quick start guide

System requirements

• 2.5 in. SATA hard drive or solid-state drive (9.5 mm height)

• USB-enabled computer system with an available USB port

The S251BPU313 is OS independent and doesn’t require any additional drivers or

software.

Note: To obtain the maximum USB throughput, you must use a system with a USB 3.1

Gen 2 port.

System requirements are subject to change. For the latest requirements, please visit

www.startech.com/S251BPU313.

Instruction manual

Product diagram

USB Micro-B connector

Power and activity LED

Instruction manual

Install a drive

Warning! Hard drives and storage enclosures should be handled carefully, especially

when they’re transported. If you’re not careful with your hard drive, you may lose data

as a result. Make sure that you’re properly grounded by wearing an anti-static strap

when you install any computer component. If an anti-static strap isn’t available, touch

a large grounded metal surface for several seconds to discharge any built-up static

electricity.

1. To open the enclosure, slide the top panel away from the USB port and lift it away

from the enclosure base.

2. Attach the included drive cushion to the back side of the enclosure, opposite to the

drive connectors.

3. Gently slide the connectors on your drive into the corresponding connectors on the

enclosure.

Note: The connectors on your drive are keyed so that the drive only ts into the

enclosure one way.

4. Align the hooks on the top panel with the grooves on the base of the enclosure and

slide the panel back into place.

Connect a drive to your computer

• After you install a drive in the enclosure, connect the USB cable to the USB port on

your computer and the USB Micro-B connector on the enclosure.

When you connect the enclosure to your computer and the OS automatically installs

the necessary software, the drive is accessible as though it’s installed internally in the

system. Before you use the drive, you need to prepare it for use and format it according

to the requirements of your OS. For more information, see the Prepare a drive for use

topic.

Note: The enclosure doesn’t require an external power supply, as it receives enough

power through the USB bus that it’s connected to.

Prepare a drive for use

Windows OS

If you install a drive that already has data on it, after you insert the drive, it appears

under My Computer or Computer with a drive letter assigned to it.

If you install a brand-new drive that doesn’t contain any data, you must prepare the

drive for use.

Warning! When you complete the following steps, all of the data on your drive will be

deleted. If your drive has data on it that you require, you should create a backup le or

use a dierent drive.

Instruction manual

1. Depending on the version of OS that you’re running, do one of the following:

• On your desktop, right-click My Computer and click Manage.

• On your desktop, right-click Computer and click Manage.

• Click the Start button or Windows icon. Enter compmgmt.msc and press

Enter.

2. On the Computer Management screen, click Disk Management.

3. A dialog window appears and asks you to initialize the drive. Depending on the

version of Windows that you’re running, you have the option to create either an

MBR or a GPT disk.

Note: GPT (GUID partition) is required for drives larger than 2 TB, but GPT isn’t

compatible with some earlier versions of operating systems. MBR is supported by both

earlier and later versions of operating systems.

4. Locate the disk that is labeled as Unallocated. To conrm that the drive is the

correct one, check the drive capacity.

5. Right-click the section of the window that says Unallocated and click New Partition.

6. To initialize the drive in the format of your choice, complete the on-screen

instructions.

When the drive is successfully installed, it appears under My Computer or Computer

with a drive letter assigned to it.

Mac OS

If you install a brand-new drive that doesn’t contain any data, you must prepare the

drive for use.

Warning! When you complete the following steps, you create a partition that uses the

entire drive space.

1. Do one of the following:

• In Spotlight, enter Disk Utility.

• Open Finder. Navigate to Applications and click Utilities. Open Disk Utility.

2. Select the new drive and click the Partition tab.

3. Enter a name for the partition.

4. Click Apply.

The drive should now appear on your desktop and be accessible in Finder.

Instruction manual

Disconnect a drive

Windows

If you’re using a computer that’s running a version of Windows, complete the following:

1. On the task bar on your desktop, click the Safely Remove Hardware and Eject

Media icon.

2. Click Eject USB Device.

3. When the Safe to Remove Hardware message appears, disconnect the USB cable

from the enclosure and your computer.

Warning! If you disconnect the drive before you receive a notication that says it’s safe

to do so, you could experience lost or corrupted data.

Mac OS

If you’re using a computer that’s running a version of Mac OS, complete the following:

1. Close any of the windows that list the contents of the removable drive.

2. On the desktop, click the USB storage icon and drag it onto the trash can icon on

your desktop.

3. Wait 5 seconds and then disconnect the USB cable from the enclosure and your

computer.

About the LED indicator

The S251BPU313 features a power and activity LED (white) indicator. For more

information, see the table below.

LED behavior Signicance

LED is illuminated The drive enclosure is receiving power

LED is illuminated and blinking The drive is being accessed

Warning! Don’t disconnect the drive from your computer when the LED is blinking, as

doing so could damage the drive and you could experience lost or corrupted data.

Instruction manual

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship

for the periods noted, following the initial date of purchase. During this period,

the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali StarTech.com Allegato

StarTech.com

StarTech.com InfoSafe UNI3510U2E Manuale utente

StarTech.com

StarTech.com RK1520WALHM Manuale utente

StarTech.com

StarTech.com IDECASE35NAS Manuale utente

StarTech.com

StarTech.com S3520BU33ER Manuale utente

StarTech.com

StarTech.com SAT3510BU2E Manuale utente

StarTech.com

StarTech.com 8STS251BPU31C3 Manuale utente

StarTech.com

StarTech.com S251BRU31C3 Manuale utente

StarTech.com

StarTech.com S3520BU33ER Manuale del sistema

StarTech.com

StarTech.com SAT3520U2ER Manuale utente

StarTech.com

StarTech.com MADE EASY HSB110SATBK Manuale utente

StarTech.com

StarTech.com RK1820WALHM Manuale utente

StarTech.com

StarTech.com SM2NGFFMBU33 Manuale utente

StarTech.com

StarTech.com SAT2510U2F Manuale utente

StarTech.com

StarTech.com S351BU313 Manuale utente

StarTech.com

StarTech.com SM21BMU31C3 Manuale utente

StarTech.com

StarTech.com S251BPU31C3 Manuale utente

StarTech.com

StarTech.com S251BU31C3CB Manuale utente

StarTech.com

StarTech.com S2510BU3PW Manuale utente

StarTech.com

StarTech.com S354UFER Manuale utente

StarTech.com

StarTech.com SATCASE25OTG Manuale utente

StarTech.com

StarTech.com S3540BU33E Manuale utente

StarTech.com

StarTech.com SAT2510U2F Manuale del sistema

StarTech.com

StarTech.com SAT2510BU3 Manuale utente

StarTech.com

StarTech.com 4POSTRACK25 Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente