StarTech.com StarView SV1631D Manuale utente
Keyboard/Mouse/Monitor
SharingSwitch
User'sManual
SV431
SV831
SV431D
SV831D
SV1631D
SV832DS
SV1632DS
Table of Contents
Introduction
Overview 1
Features 2
Configurations 3
Installation
Device Connection 6
Initial Power-Up 8
Optional Rack Mount Accessories 9
Operation
Front Panel Push Buttons 10
OSD (On-Screen-Display) Operation 11
Hot Key Commands 15
Cascade Configuration
Connection 17
Change Configuration while Running 19
Multi-access StarView
Overview 20
Connection 20
Operation 20
Configuration 21
Appendices
Specifications 22
Trouble Shooting 23
1
Introduction
Overview
One-Console StarView Switches
The StarView allows you to access multiple computers from one
keyboard, mouse and monitor. There is no interface card or software
to configure. Installation is as easy as connecting cables between
the StarView and your computers. Operation is as simple as
pressing push button, entering hot-key command and navigating
through the user-friendly on-screen menu (available on models with
OSD support). Depending on the model you have, it switches up to 4
(SV431, SV431D), 8 (SV831, SV831D) or 16 (SV1631D) IBM-
compatible computers. The StarView is independent of the computer
operating system.
Two-Console StarView Switches
The advanced multi-access StarView Switches enable you to control
multiple computers from two different locations, remote and local with
two keyboards, mice and monitors. SV832DS controls 8 computers
and SV1632DS controls 16 computers.
On-Screen Display (OSD) Menu
For SV431D, SV831D, SV1631D, SV832DS, SV1632DS
For StarViews with built-in OSD control, you can name your
computers, switch to a computer from a list, configure settings with
easy-to-use menus, and view the name of the selected computer
on-screen with programmable time interval. The OSD displays the
system status throughout operation.
Automatic Mouse Conversion
The StarView Switch enable you to connect computers with PS/2 or
serial mouse ports (using adapters supplied with each StarView
Switch) and control the computers from one PS/2 mouse.
The StarView automatically identifies the mouse and switches to
proper mouse protocol.
2
High Video Quality
StarView supports VGA resolution up to 1600x1200 @85Hz without
any degradation. Advanced VGA circuit design guarantees smooth
and flicker-free switching from one computer to the other with
distance up to 100ft (30M)* at both Console and PC sides.
NOTE: This User's Manual is written for the following models.
StarView Switch Models
No. of console
supported
1 1122
No. of PC supported 4 8 16 816
No OSD SV431 SV831 - - -
OSD SV431D SV831D SV1631D SV832DS SV1632DS
·Tested with high-quality UL2919-rated, low-loss and shielded
cables.
Features
nSupports both PS/2 and serial mouse
nCascade configuration expands system capability
nAuto-scan automatically selects computers sequentially
nSupports Microsoft IntelliMouse (Pro)
nHot-key functions allow easy computer access
nKeyboard states automatically saved and restored when switching
computers
nOperating system independent, transparent to all applications
nPlug and play system configuration
nKeyboard and mouse can be hot plugged at any time
nHigh VGA resolution 1600x1200
nDDC2B compatible
nOptional standard 19 inch rack mounting kit available
nSupports optional multimedia module for microphones and stereo
speakers
3
Extra features for On-Screen Display model
nAssign computers with unique and meaningful names
nIdentify and select computers by the names
nProgrammable scan filters unused computers
nStore system settings and name entries to non-volatile memory
nPassword security locks computer from unauthorized access
nGain complete control with easy-to-use OSD interface
More features for multi-access models
nManage multiple computers from two locations
nDifferent Console may have different type mouse i.e. generic PS/2
mouse and scroll button
nSelectable User Timeout
Configurations
StarView has several models each supporting a different number of
computers. For applications with a large number of computers,
StarViews can be cascaded in a master/slave configuration to
support even more computers.
Single StarView Configuration
Connect a PS/2 keyboard, a PS/2 mouse and a VGA multi-sync
monitor directly to the Master’s CONSOLE port. Then, connect
multiple sets of keyboard, mouse and monitor cables to the “PC x”
ports of the StarView, as shown in figure 1.
4
Figure 1: A single StarView configuration
Cascade (Master/Slave) Configuration
You can connect a second level of one or more StarViews to “PC
1”~”PC 4” (SV431) or "PC 1"~”PC 8” ports (SV831 & SV1631) of a
Master unit. Cascade configuration expands system ability allowing
you to select computers connected to the Master or Slaves. There
is only one Master, which has a mouse, a keyboard and a monitor
connected to its CONSOLE port directly operated by a user.
Once connected, StarViews automatically configure themselves to
either Master or Slave. Slaves of different StarView models can be
mixed in cascade configuration. [NOTE: Master must have equal or
more PC ports than that of Slaves, i.e., if SV831 is a master, SV831
and SV431 can be Slaves, but SV1631 can not.]
5
Figure 2: A cascade StarView configuration
Throughout this manual, Master is the StarView that has a
physical keyboard, mouse and monitor connected to its
CONSOLE port. Slave is a StarView that has its CONSOLE port
connected to a Master's “PC x” port. Slave only exists in
cascade configuration.
6
Installation
Device Connection
The monitor connected to the HD-DB-15 VGA port of a Master
CONSOLE must be capable of synchronizing with the computer's
video signal. If you are uncertain about the monitor type, please
consult the monitor user's manual. Connect a PS/2 mouse and a
keyboard to the CONSOLE port marked with a mouse and a
keyboard respectively as shown in figure 3. [NOTE: Only a PS/2
mouse can be connected to the CONSOLE mouse port. The
StarView's automatic mouse conversion system allows you to
connect computers using serial mouse and control the computers
from one PS/2 mouse.]
Figure 3: Master console connection
7
Determine the channel address of each computer. For computers
using PS/2 mouse, connect the computer's mouse and keyboard
cables to the StarView’s connectors marked with a mouse and
keyboard respectively, as shown in figure 4.
Figure 4: Master computer connection
For computers using serial mouse, connect the DB-9 to mini-DIN-6
adapter (supplied with the StarView) to the computer mouse port,
then use PS/2 cables to connect the mouse to StarView, see figure 5.
Connect the computer's monitor cable to the HD-DB-15 VGA
connector. Repeat above steps for all remaining computers to be
connected to the StarView.
Figure 5: Adapter and serial mouse connection
8
Initial Power-Up
Make sure all computers and StarViews are powered down
during installation. You must power up the Master StarView
before turning on any other devices.
4For single StarView: 1) Apply a power adapter to the Master.
2) Turn on computers.
4For cascade: 1) Apply a power adapter to the Master.
2) Apply power adapters to all Slaves. 3) Turn on computers.
Note: You may hot plug additional powered-down computer and
Slave without turning any existing StarView or computer off after
initial power up.
Replace Master Console Devices
You can replace a faulty keyboard or mouse of the Master
CONSOLE port at any time without powering down the Master, as
long as your computers are booted with proper device driver for the
new device. Should you encounter any difficulty, just activate K/M
RESET by holding both front-panel ‘1’ and ‘2’ push buttons down for
2 seconds.
Adhesive Rubber Foot
For desktop operation, you may stick the four round rubber feet
(supplied with the unit) to the bottom of the StarView. NOTE: Do not
use the rubber feet for rack mount operation.
Altri manuali per StarView SV1631D
1
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali StarTech.com Interruttore
StarTech.com
StarTech.com ICUSB2324 Manuale utente
StarTech.com
StarTech.com IES1G52UP12V Manuale utente
StarTech.com
StarTech.com DS15H54 Manuale del sistema
StarTech.com
StarTech.com HB30A3A1CST Manuale utente
StarTech.com
StarTech.com C2-H46-UC2-PD-KVM Manuale utente
StarTech.com
StarTech.com SV431DPUA Manuale utente
StarTech.com
StarTech.com MSTMDP124DP Manuale utente
StarTech.com
StarTech.com HB30C3A1GEA Manuale utente
StarTech.com
StarTech.com ICUSB2328 Manuale utente
StarTech.com
StarTech.com SV211DPUA4K Manuale utente
StarTech.com
StarTech.com SV441DUSBI Manuale utente
StarTech.com
StarTech.com KVM SWITCHBOX VGA DS15H954 Manuale utente
StarTech.com
StarTech.com SV431DHD4KU Manuale utente
StarTech.com
StarTech.com 8STICUSB23216FD Manuale utente
StarTech.com
StarTech.com SV431DD2DU3A Manuale utente
StarTech.com
StarTech.com STARVIEW SV215MICUSBA Manuale utente
StarTech.com
StarTech.com ConvergeAV VS410HDMIE Manuale utente
StarTech.com
StarTech.com SV831DVIU Manuale utente
StarTech.com
StarTech.com StarView SV1631D Manuale utente
StarTech.com
StarTech.com SV211 Manuale
