Stec SV1 Manuale utente
SV1 GNSS Receiver
User Manual
V2.0_202307
Contents
SV1User Manual
User Manual.......................................................................................................................................1
1.
Introduction.................................................................................................................................3
1.1
Appearance...........................................................................................................................3
1.2
Indicator ...............................................................................................................................3
1.3
Interface................................................................................................................................4
1.4
Power button.........................................................................................................................5
2.
Web User Interface.....................................................................................................................5
2.1
Position.................................................................................................................................6
2.2
Satellites...............................................................................................................................7
2.3
Modules................................................................................................................................7
2.4
Working Mode .....................................................................................................................7
2.5
Satellite Setting ....................................................................................................................8
2.6
System Para
...........................................................................................................................8
2.7 Output ..................................................................................................................................9
2.8 Raw Data..............................................................................................................................9
2.9 Log .................................................................................................................................11
2.10 Management .....................................................................................................................12
3.Basic Operation.........................................................................................................................14
3.1 Insert SIM card...................................................................................................................14
3.2 Charge the battery..............................................................................................................14
3.3 Measure antenna height......................................................................................................14
3.4 IMU Sensor........................................................................................................................15
3.4.2 IMU Tilt Survey .................................................................................................15
3.5 AR Stakeout...........................................................................................................................16
SV1 User Manual
1.
Introduction
This is the user manual for STEC SV1GNSS receiver. It gives basic description and
operation guide which may help user to operate device properly.
1.1
Appearance
STEC SV1 main body is designed with magnesium alloy material to provide durable
usage and better heat dispersion as well as light weight 695g. The internal battery
ensures up to 20 hours continuous working.
1.2
Indicator
Working status is viewable through the indicators. The meaning of each indicator:
Indicator
Color
Meaning
Satellite
Red and Green
•Off: no receiving satellites
•Flash red: receiving satellites but no
solution status.
•Flash green: have solution but not fixed.
•Solid green: fixed solution
•Flash red and green alternately: main board
abnormal
Data link
Green and Blue
•Solid green: datalink is ready to start.
•Flash green: datalink is transmitting data
normally.
•Flash Blue: when raw data recording is
enabled, the LED will flash according to
the
interval
Bluetooth
Blue
•Off: no Bluetooth connection
•Solid blue: has Bluetooth connection
SV1 User Manual
1.3
Interface
STEC SV1 GNSS receive bottom interface is shown as below.
SV1 User Manual
1.4
Power button
The main function as below:
Power On
Long press button for five seconds until hear one
beep and see all lights on to power on receiver.
Power Off
Long press button for three seconds then release,
will hear the voice “Please release button, short
press to power off, long press to self-check” Then
short press the button again to confirm.
Broadcast Current Working
Mode
Receiver will broadcast current working mode.
when press the power button once.
Self-check
Long press button for three seconds then release,
will hear the voice “Please release button, short
press to power off, long press to self-check” Then
long press button for three seconds then release,
will hear the voice “Start self-check”.
2.
Web User Interface
User can connect to receiver WIFI hotspot with PC, smartphone, or tablet. The hotspot
name is the device serial number, can be found under the bottom of the device label.
Open web browser and input the IP address “192.168.10.1”. The default username is
“admin”, password is “password”. From the website, user can manage working status,
change working mode, configurate basic settings, download raw data, update
firmware, and register device.
Language and intelligent voice
After entering web UI, users can configure language display and device voice via pressing
following button.
SV1 User Manual
2.1
Position
View basic position information, satellite number, PDOP and time. In static mode, can
start and stop recording here.
SV1 User Manual
2.2
Satellites
View satellite list and satellite map, set cut-off angle.
2.3
Modules
View receiver information: firmware version, GNSS board, and network module.
2.4
Working Mode
Configure working mode: base, rover or static. Also can configure data-link parameters.
SV1 User Manual
2.5
Satellite Setting
Configure the satellites to be used.
2.6
System Para
Configure receiver settings.
-User can set time zone and sensor update rate.
-Smart voice broadcast can be activated or not according to client need.
-Set the Rinex version for static data naming method.
-“Cloud service” and “Track back” is used for uploading position information to cloud/TCP
server.
SV1 User Manual
2.7 Output
Configure NMEA data output through Bluetooth.
2.8 Raw Data
Download raw data or convert data to RINEX format. User can use check box, then
click “Download choose” button to download multiple files.
The default static file type is *.dat, if users want to convert the file type to Rinex format, you can select
one file, then press “Modify” button, it will pop up a dialog, select “convert” from drop-down menu,
then choose required Rinex format version, press submit, it will generate a new file package in the file
list.
SV1 User Manual
Backup data
The points collected in SurPad4.x will be backup in receiver storage automatically to
avoid data loss. Can restore the data to SurPad software.
Indice
