
INSTALLATION
Setting up the Call Unit
Stick the Call Unit onto a door, window, counter, desk,
wall etc (not suitable for iron doors) using the supplied
strong adhesive tape. Remove the protective paper
from the adhesive tape on the back of the Call unit and
stick to the required window. Please use the fixing
templates provided and line them up precisely –
WARNING – THE ADHESIVE USED IS EXTREMELY
STRONG. MISTAKES WILL BE DIFFICULT TO
RECTIFY.
When placing the Call unit on glass (window/door), stick
the rear static label in exactly the same position as the
front of the Call Unit. The Call Unit can now be used
from the other side of the window/door (except CH104).
In such case thickness of glass/door should be less
then 2 cm.
The Call Unit is also ideal for use on counters, desks,
toilets, reception areas or on wooden posts. For these
uses, the Call unit can be fitted with the supplied
adhesive tape. If additional security is required there is
provision for three screws which can be fitted by
opening the three screw covers and insert screws and
screw to desired location.
9