2
INTRODUCTION
Congratulations on purchasing your STEP-HEAR™
Activator. The STEP-HEAR™ system consists of
two units: a weather resistant transmitter/base and
a small receiver/activator. Once installed, the base
sends out a continuous signal. When the activator,
held by the user, is within the range of the base, it
vibrates and beeps. Pressing a button on the
activator triggers a pre-recorded voice
announcement from the base. This provides
information that helps users find their destination.
It is important that you read the instructions below in
order to use your STEP-HEAR™ system to its full
potential. Keep this user guide in a safe place for
future reference.
This guide explains how to use the following:
STEP-HEAR™ Activator (SH-220)
Please note: Step Hear is not responsible for the
content of voice announcements or any other
recordings played back from the Step Hear bases.
Any content recorded onto the bases are the
responsibility of the base/service provider.
