
Instruction Manual forAS380 Series Elevator Integrated Drive Controller
V
4.1.1 For typical terminal wiring diagram of elevator integrated drive controller. ____________26
4.2 Notice items for peripheral equipments connection................................................. 27
4.2.1 Power supply ____________________________________________________________27
4.2.2 Breaker_________________________________________________________________27
4.2.3 AC reactor at the input side _________________________________________________27
4.2.4 Interference filter at the input side ____________________________________________27
4.2.5 Main circuit output contactor ________________________________________________27
4.2.6 Interference filters at the output side.__________________________________________27
4.2.7 AC reactor at output side ___________________________________________________27
4.2.8 DC reactor ______________________________________________________________28
4.3 The technical requirements for wire arrangement of peripheral equipments of the
elevator integrated drive controller.................................................................................. 28
4.3.1 The cable requirement of hoist way and accompanying cable arrangement ____________28
4.3.2 Method of Wiring Between Call board and TXV+、TXV-、TXA+、TXA- ___________29
4.3.3 Hoist way switch position __________________________________________________30
4.3.4 Upper and Lower Leveling Inductor __________________________________________31
4.4 main circuit terminal wiring....................................................................................... 33
4.4.1 The arrangement of main circuit terminal ______________________________________33
4.4.2 The main circuit terminal labeling and function description ________________________33
4.4.3 Main circuit wire specification_______________________________________________33
4.4.4 The main circuit composition________________________________________________36
4.4.5 The detailed description of main circuit terminal wiring ___________________________36
4.5 anti-interference measures.......................................................................................... 40
4.5.1 The specialized noise filter connected at the output side.___________________________40
4.5.2 Main circuit wiring arrangement _____________________________________________40
4.5.3 the better anti-interference measure ___________________________________________41
4.5.4 Relation between wiring length and carrier frequency. ____________________________41
4.6 Wiring of Control Circuit Terminals ......................................................................... 42
4.6.1 Layout of Control Circuit Terminals __________________________________________42
4.6.2 Functional Description of Control Circuit Terminals______________________________42
4.6.3 Dip switch setting method __________________________________________________45
4.6.4 Wire specification of control circuit___________________________________________45
4.6.3 main extension board SM.09I0/C introduction __________________________________46
4.6.5 Notice items for control circuit terminal wiring__________________________________48
4.7 The wiring of PG card terminals................................................................................ 48
4.7.1 PG card –Incremental ABZ 12V _____________________________________________48
4.7.2 PG card –SIN/COS _______________________________________________________51
4.7.3 PG card –Incremental ABZ 5V ______________________________________________54
4.7.4 PG card –Endat with absolute value __________________________________________56
4.7.5 Precaution for PG card terminal wiring ________________________________________58
Chapter 5 Operator .....................................................................................................59