Stirling Technology, Inc. 4
____________________________________________
Specifications:
Model: RecoupAerator®SD-95+ Energy Recovery Ventilator. Includes patented Rotary
Heat Exchange Core, filters, fans, and drive motor. Pre-heaters are optionally
available.
Air Flow Capacity: 197 cfm
Sensible Thermal Efficiency: 96% at full flow
Heat Exchange Type: Patented Rotary Random Matrix Polymer
Filtration: Washable Heat Exchange matrix 95% effective at 5 microns with washable
expanded aluminum pre-filter.
Motor Type: General Electric 1/3 hp programmable brushless motor
Electrical Ratings: 120/240 Vac, 60 Hz., 5.0/2.8 Amps
Dimensions: 42 cm D x 56 cm W x 58 cm H (16.8” x 22.5” x 23.4”)
Unit Weight: 30 kg (70 lbs.)
Shipping Weight: 36.3 (80 lbs.)
Mounting: May be mounted vertically or horizontally suspended from floor joists, or
placed on floor in conditioned spaces, such as attics, basements,
and utility rooms. Collars are 6”.
Maintenance: Clean filters once every 6 months, and clean or replace if necessary.
Certifications: ETL Testing Labs to ANSI/UL-1995 / CAN/CSA C22.2 No. 236 (heating
and cooling equipment).
General Information:
Application: The RecoupAerator®Energy Recovery Ventilator is designed to supply fresh
air and exhaust stale air while ventilating your home with conditioned and filtered
outside air. The RecoupAerator®draws fresh air from outdoors through the patented
rotary heat exchange core for distribution throughout the home. Stale air is exhausted
through the RecoupAerator®and ducted to the outdoors after transferring heat and
moisture to the incoming air stream.
Controls: Your RecoupAerator®comes equipped with a variable speed control knob, boost
function capability, “clean filter” indicator light, and furnace wiring terminals. This
allows you to adjust the airflow as needed to maintain a comfortable level of fresh air
into your home. The “clean filter” indicator light is designed to notify you when your
pre-filters and heat exchange material need to be cleaned. For systems where
constant ventilation is not required, a remote on/off switch, timer, and/or furnace
inputs can be wired directly to the controller.
Frost Control: A pre-heater (SH-1000) is recommended for colder climates in which the
outdoor air temperature will fall below 10oF for extended periods of time (24-48
hours). Each pre-heater comes equipped with a thermostat to automatically activate
and shut off pre-heater at pre-set temperatures. The pre-heater may additionally be
wired to a remote on/off switch.
____________________________________________
