Stratix eZ-2D Xaminer Manuale di installazione e funzionamento
6/17/2015
STRATIX XAMINER EZ-2D BARCODE VERIFIER |
PRODUCT REFERENCE GUIDE (V2.0)
1
Table of Contents
Chapter 1 Getting Started ...................................................................................................... 2
Unpacking......................................................................................................................................2
System Requirements.....................................................................................................................2
Installing the Verifier......................................................................................................................2
Placing the Barcode Symbol............................................................................................................5
Chapter 2 Using the Verifier................................................................................................... 9
Looking at Data with the Verifier ....................................................................................................9
Commanding the Verifier .............................................................................................................10
Verifier Toolbar Button Commands...............................................................................................11
Symbol Image Window.................................................................................................................13
Symbol Grades Window ...............................................................................................................14
Symbol Statistics Window ............................................................................................................16
Chapter 3 User Preferences Options .................................................................................... 17
Accessing the Parameter Setup Window .......................................................................................17
Symbol Grades Setting .................................................................................................................21
Chapter 4 GS1 Data Structure Validation.............................................................................. 22
GS1 Data Structure Validation Overview .......................................................................................22
GS1 Application Identifier Details .................................................................................................22
GS1 Data Structure.......................................................................................................................23
Chapter 5 Exporting Reports ................................................................................................ 24
Exporting Reports to Excel............................................................................................................24
Exporting Reports to Adobe PDF File.............................................................................................25
Chapter 6 Error Messages .................................................................................................... 28
System Error Messages.................................................................................................................28
Scanner Reset ..............................................................................................................................30
Appendix A: 2D Barcode Samples ........................................................................................ 31
2
Chapter 1 Getting Started
Unpacking
Before going any further, take a moment to check the contents of the package to ensure your order was shipped
complete. Make sure no items are damaged or omitted. Xaminer eZ-2D verifier package includes:
Carry case
Imager scanner & USB interface cable
Stand
Calibration files CD1
Verifier software and imager scanner driver CD2
Installation guide
Product reference guide
Calibration Check Card
Certificate of Calibration
If any of these items are missing or damaged, please notify Stratix Corporation within two business days of receipt
of your verifier.
System Requirements
Windows® 7 (32 bit/64 bit), Windows® 8 (32 bit/64 bit).
Intel® Core™2 Duo Processor.
2GB of RAM.
USB port 2.0.
Microsoft.NET Framework 4.0 or later
Microsoft Visual C++ 2010 Redistributable Package (x86)
Microsoft Office Excel, Microsoft Internet Explorer.
Adobe Reader.
Installing the Verifier
1. Plug the USB cable modular connector into the cable interface port on the bottom of the imager scanner
handle. See Figure 1-1.
2. Gently tug the cable to ensure the connector is properly secured.
3. Connect the other end of the interface cable to the PC USB port.
4. Place the verifier stand on a flat desk surface.
5. Place the imager scanner into the scanner holder (cup). See Figure 1-2.
3
Figure 1-1
Figure 1-2
4
Stand Position & Field of View (FOV)
Stand position 1: Stand position 1 is the primary verification position for most barcodes. The FOV at this position is
1.10” x 1.10”(Figure 1-3 white square), and the maximum barcode size is 1.0” * 1.0”. The minimum X dimension
required for the barcode is 10mils.
Stand position 2: Stand position 2 is used for bigger barcode which the FOV at stand position 1 is too small for the
barcode to be verified. The FOV at stand position 2 is 1.30” x 1.30” (Figure 1-4 white square), and the maximum
barcode size is 1.2” * 1.2”. The minimum X dimension required for the barcode is 15mils.
Note: The illuminated red brackets and the red crosshair on the surface of top plate are the aiming pattern of
imager scanner. The relative position between the crosshair and FOV is useful for better placing the barcode in the
center of the FOV.
Figure 1-3 Stand Position 1 FOV
5
Figure 1-4 Stand Position 2 FOV
Placing the Barcode Symbol
1. Extract the plunger (Figure 1-5) and move the top plate up or down to stand position 1 or 2, and then
insert the plunger into the hole of that position (Default is stand position 1).
2. Loosen the knob to move down the bottom plate to make enough room for placing the barcode item
between top plate and bottom plate.
3. Place barcode item on the surface of bottom plate, make sure the barcode symbol faces the top plate.
4. Move the bottom plate up once it reaches the top plate.
5. Adjust the barcode position to ensure it is in the center of the FOV.
6. Tighten the knob to make it ready for verifying.
6
Figure 1-5 (a)
Figure 1-5 (b)
7
Supported Barcode Symbologies
Stratix Xaminer eZ-2D supports two barcode symbologies: QR Code and Data Matrix (ECC 200).
QR Code: The minimum symbol size is 21X21, and the maximum symbol size is 57X57. See Figure 1-6.
Data Matrix: The minimum symbol size is 10X10, and the maximum symbol size is 52X52. See Figure 1-7.
Figure 1-6(a) Figure 1-6(b)
Figure 1-7(a) Figure 1-7(b)
8
Opening Verifier Software
To open Stratix Xaminer eZ-2D, click the Stratix Xaminer eZ-2D icon (Figure 1- 8) on your desktop, or open the
Start Menu and click on All Programs->Stratix Corporation->Stratix Xaminer eZ-2D.exe (Figure 1-9)., the main
user interface will open.
Figure 1-8
Figure 1-9
9
Chapter 2 Using the Verifier
Looking at Data with the Verifier
The first time you open Stratix Xaminer eZ-2D you will see the three data windows shown below (Figure 2-1).
Verification reports are displayed in these windows (Figure 2-2) by commanding the Stratix Xaminer eZ-2D to scan
barcode using this interface.
Figure 2-1
Indice
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
