Strix Systems Strix Access/One MWS100-HSX10 Manuale utente
MWS100-HSX10 Installation Guide
Strix Access/One®
MWS100-HSX10
Guide
(Antennas optional)
Revision
March, 2010
Copyright © 2003 – 2010 Strix Systems, Inc.
2350 Mission Co ege B vd. #1070
Santa C ara, CA 95054
USA
MWS100-HSX10 Guide
FCC Notice
This wire ess network device comp ies with Part 15 of the FCC Ru es. Operation is subject to the
fo owing two conditions: 1. This device may not cause harmfu interference. 2. This device must
accept any interference received, inc uding interference that may cause undesired operation.
This wire ess network device has been tested and found to comp y with the imits for a C ass B
digita device pursuant to Part 15 of the FCC Ru es. These imits are designed to provide
reasonab e protection against harmfu interference in a residentia insta ation. This wire ess
network device generates, uses, and radiates radio frequency energy and, if not insta ed and
used in accordance with the instructions, may cause harmfu interference to radio
communications. However, there is no guarantee that interference wi not occur in a particu ar
insta ation. If this wire ess network device does cause harmfu interference to radio or te evision
reception, which can be determined by turning the wire ess network device off and on, the user is
encouraged to try to correct the interference by one or more of the fo owing measures: Reorient
or re ocate the receiving antenna; Increase the separation between the wire ess network device
and the affected receive; Connect the wire ess network device into an out et on a circuit different
from that to which the receiver is connected; Consu t the dea er or an experienced radio/TV
technician for he p.
European Community (EC) Directives and Conformity
This wire ess network device is in conformity with the Essentia Requirements of R&TTE Directive
1999/5/EC of the European Union.
Non-Modification Statement
Unauthorized changes or modifications to Strix devices are not permitted. Modifications to Strix
devices wi void the warranty and may vio ate FCC or other regu ations.
RF Exposure Requirements
To ensure comp iance with FCC RF exposure requirements, the antenna used for this wire ess
network device must be insta ed to provide a separation distance of a minimum of 40cm or
more from a persons, and must not be co- ocated or operated in conjunction with any other
antenna or radio transmitter. Insta ers and end-users must fo ow these insta ation instructions.
Professiona Insta ation On y
This unit must be insta ed by a trained professiona insta er on y.
MWS100-HSX10 Guide
Table of Contents
1. Introduction ............................................................................................................................ 4
2. Physical Specification.............................................................................................................. 5
3. Electrical Specification............................................................................................................ 5
4. op Panel Connectors............................................................................................................. 6
5. Bottom Panel Connectors....................................................................................................... 6
6. Powering he Unit .................................................................................................................. 7
7. Mounting Options................................................................................................................... 7
8. Antenna Options..................................................................................................................... 8
9. Installation .............................................................................................................................. 9
10. Shipping Content .................................................................................................................. 10
11. Configuration ........................................................................................................................ 11
MWS100-HSX10 Guide
1. Introduction
1 Introduction
Strix Systems introduces the Integrated wireless MWS100-HSX10 to its award winning
Access/One® family of wireless indoor, outdoor, mobile and video surveillance products.
Enclosed in a weatherized, air and watertight outdoor enclosure, Utilizing Strix DMA™, the
Access/One MWS100-HSX10 dual radio mesh system uses advanced algorithms to deliver high
performance intelligent radio algorithms that dynamically adjust to the environment for
superior multi-frequency, multi-channel, multi-radio technology that delivers multi-megabit and
low latency performance.
Designed to address key markets, Strix MWS100-HSX10 is easily deployable, automatically and
instantly self-configuring, and provides superior performance, security and flexibility. City and
municipal public safety deployments as well as mobile/RV parks, marinas, outdoor malls, fixed
and temporary event venues, outdoor enterprise, industrial and strategic locations, for
applications ranging from general WISP / hot spots, mobile data, video surveillance, VoIP and
backhaul transport for SCADA and AMR, efficiently increasing the reach of the networks in a
robust and a cost effective way.
Strix MWS100-HSX10 offers unique set of finely tuned features including robust high
performance 802.11a, 802.11g and high power licensed 4.9 GHz (DSRC-C) for a combination of
high density user access and high-speed backhaul to Strix Access/One Outdoor Wireless Mesh
Networks. Strix MWS100-HSX10 also supports industry-standard security algorithms for secured
backhaul and client connectivity, multiple SSIDS and VLANs as well as end-to-end Quality of
Service. Extended operating temperature ranges and flexible mounting options make Strix
MWS100-HSX10 suitable for all types of deployment scenarios. he MWS100-HSX10 scales
efficiently and economically while maximizing coverage areas affordably. It greatly reduces
deployment, operating costs bringing down the otal Cost of Ownership.
MWS100-HSX10 Guide
2.
Physical Specification
2 Physical Specification
•Dimensions: 7. 2 5” H x 8. 25” W x 2. 25” D
•Weight: 2.4 Lbs (1.08 Kg)
•NEMA 4X rated, IP 67
•N - ype Female Connectors
•Weather proof Power Connector
•Weather proof Ethernet Connectors
•Pole mount included and Wall mount (optional)
3. Electrical Specification
3 Electrical Specification
•AC Input: Auto- sensing 100- 24 0 VAC, 50/60 Hz (Optional External Power Supply)
• DC Input: 12V – 48 VDC, 6A maximum
• High Power Passive PoE Input, Up to 48 VDC
• AC Power Consumption: 18W - 20 W
MWS100-HSX10 Guide
4. Top Panel Connectors
4 Top Panel Connectors
5.
Bottom Panel Connectors
5 Bottom Panel Connectors
N
-
Type
N
-
Type
High Power ~ 20W
12
–
48 VDC (in)
2.4
GHz
5
GHz
MWS100-HSX10 Guide
6. Powerin The Unit
6 Po ering The Unit
Strix MWS100-HSX10 supports 12 - 48 VDC and high power, assive ower Over Ethernet
( oE). External AC power is available as an optional AC/DC power supply and accessory
item. Another available option is a high power, oE Injector and accessory item.
7.
Mountin Options
7 Mounting Options
his section provides instructions for mounting MWS100-HSX10 unit. he unit comes with
vertical pole mount (as a standard accessory) and Wall / Vehicle mount is optional. It is must for
this unit to be mounted vertically, so that the heat dissipation happens properly and unit
functions as per the temperature specification.
Below pictures show two different ways for MWS100-HSX10 unit mounting.
Pole mount comes standard with unit Wall/Vehicle mount is optional
MWS100-HSX10 Guide
8. Antenna Options
8 Antenna Options
he Strix MWS100-HSX10 does not include antennas but any style and gain antenna – OMNI
directional, directional or sector is an optional accessory item. Please follow required
weatherproofing techniques of all cables and connectors.
Notes About Antenna Installations
Read the following notes before installing any antenna.
•OMNI antennas can be used either directly attached to the N- ype connectors or
through an RF cable extension
•A sector antenna should point towards the center of the sector covered by the antenna
•Fixed point-to-point backhaul antennas should point towards the desired Strix Systems
Access/One Network device intended for the backhaul connection
•Unused antenna ports should be weather protected and a 50 ohm terminator is
recommended
•Depending on the application and deployment scenario, Strix Systems can assist in
process of antenna selection for the design
Antenna 2
Connector
Antenna 1
Connector
MWS100-HSX10 Guide
9. Installation
9 Installation
Note: he MWS100-HSX10 is designed for professional installation. Failure to comply fully with these
instructions may void the MWS100-HSX10 warranty and/or violate local safety or radio regulations.
1.
Select a mounting location for the MWS100-HSX10. he MWS100-HSX10 is designed for indoor,
outdoor and in-vehicle applications. Mount the MWS100-HSX10 using the chassis mounting holes
and hardware suitable for the particular installation.
Note: In the U.S. for the full range of 5 GHz band, specifically the 515 -525 MHz band is only available for
indoor applications. It is the responsibility of the installer to configure the MWS1 -HSX1 to use this band
only when it is installed indoor.
2. Select antennas with gain specifications and factor in cable loss by frequency to meet maximum
allowable regulatory EIRP levels by Country for point to point and point to multi-point applications.
3. Mount the selected antennas securely following all antenna manufacturer instructions and
recommendations. Provide a suitable length of LMR-400 type antenna cable between each antenna
and the MWS100-HSX10.
RF Exposure Requirements
o ensure compliance with FCC RF exposure requirements, the antenna used for this wireless
network device must be installed to provide a separation distance of a minimum of 40cm or
more from all persons, and must not be co-located or operated in conjunction with any other
antenna or radio transmitter. Installers and end-users must follow these installation instructions.
4. he MWS100-HSX10 supports several power options. It includes 12 – 48 VDC and optionally an
AC/DC power supply and High Power PoE (~20 W). For DC only power, an included power cable is
terminated to the Strix power connector and un-terminated end can be used for termination into a
DC power source.
5. Provide an outdoor rated Ethernet cable for connecting the MWS100-HSX10
i. o any Switch/Router at the wired core network
ii. o any networks or devices behind it when acting as a wireless mesh node with backhaul
to a wireless repeater location or wired network
iii. o a High Power Passive PoE Injector (~ 20W or more) to power the HSX10
iv. o another HSX10 wireless mesh node for back to back connectivity, flexible deployments,
increased capacity, etc.
6. Attach the outdoor rated power cable to the PWR connector on the MWS100-HSX10 bottom panel.
MWS100-HSX10 Guide
10. Shippin Content
10
Shipping Content
he MWS 100 HSX- 10 contains the following items. If any of these items are missing please contact
Connector
Washer
O
-
Ring
Pin 1 (
-
)
Pin (+)
Indice
Altri manuali Strix Systems Punto di accesso wireless
