Studiomaster DigiLiVE Manuale utente

digiLiVE Digital Mixing Console

Quick Start Guide

Issue 1.0

Introduction

This Quick Start Guide is intended to help you do just that – to get going with your digiLiVE as

quickly as possible. The Guide will show you how to connect your microphones, instruments or

other audio sources to the console, how to connect speakers in various ways and how to create

a basic mix. It goes on to show you how to enhance your mix by adding gating, compression and

reverb, and explains how your digiLiVE can be used as a monitor mixer. Finally, it shows you what

to do to control your digiLiVE remotely from a compatible iOS device.

IMPORTANT: This Quick Start Guide is not intended as an alternative or replacement for the full

digiLiVE User Guide, which will either be in the box with the console, or available to you as a free

download. As you work through the simple operating examples in the Quick Start Guide, you’ll

almost certainly notice that the console includes a great many features and possibilities that are not

covered here. Once you’ve mastered the basic principles of operation explained in the Quick Start

Guide, you should refer to the User Guide for full details of how to use all the additional facilities.

Unpacking your digiLiVE

Unpacking the digiLiVE

 digiLiVE console

 Console PSU

 IEC power cable

 Wi-Fi dongle

 User Guide*

* may alternatively be available as a download from www.studiomaster.com

Powering your digiLiVE

Your digiLiVE



mains supply with the cable supplied; it can operate on mains voltages from 100 V to 240 V. When

the PSU is connected to AC mains, a blue LED on the PSU lights. The DC output cable should be

plugged in to the 12V/DC INPUT socket on digiLiVE’s rear panel.

Once connected, digiLiVE starts its boot-up sequence as soon as you turn the AC mains on; this

takes approximately 30 seconds.

The Power button 

 



passed with all console settings retained;

 A short press when the console is in SAFE mode returns it to its normal operating state;

 

 

Whenever digiLiVE powers down, all current console settings are saved. Next time you power it

up, digiLiVE will have exactly the same settings you last used.

Connecting speakers

Connect powered speakers to the two rear panel XLR sockets MIX OUTPUT L & Rusing suitable

cables. All the main outputs on digiLiVE are at standard line level and are electronically balanced.

digiLiVE’s outputs



NOTE: It is always good practice to turn on interconnected audio devices in sequence. In this case,

turn digiLiVE

digiLiVE

avoid nasty loud bangs or thumps from the speakers.

Connection to passive speakers Connection to active speakers

ADJUST, MUTE and SOLO

In the Application Examples in this Quick Start Guide, you’ll need to navigate around digiLiVE’s

touch-sensitive screens, make selections and adjust various parameters.

Most digiLiVE adjustments – apart from fader movements, mutes, etc. - can be made using the

large rotary ADJUST knob. The parameter being adjusted will be indicated on-screen by a yellow

border around its control; to select a parameter for adjustment, touch its control on the screen.

In the example below, the ADJUST knob will pan the signal in Channel 1 between the left and right

stereo channels.

Press a channel MUTE button to mute the channel and again to unmute. You can plug headphones

into the socket marked and use the SOLO buttons to listen to one or more input channels

while setting up the mix. Pressing SOLO does not alter the main output mix.

Application Examples

The examples shown here use digiLiVE’s basic “out of the box” factory default settings. All of the

situations described can be expanded upon in various ways by using digiLiVE’s many additional

features; please consult the User Guide for more detailed descriptions.

IMPORTANT: Always start setting up your live sound application with digiLiVE’s faders fully closed

GAIN

This should ensure that no bangs or thumps will be heard from your system while you’re setting

everything up.

Application Example 1 – solo performer

This simple application would be suitable for a solo performer, e.g., a singer/instrumentalist. It would

also be appropriate for an AV situation such as in a school classroom, or anywhere a presenter is

using a laptop or similar audio source as part of his/her presentation.

INSTRUMENT

(via mic, DI box or from

Line Out on amplifier)

MIC

LAPTOP, TABLET, ETC

POWERED SPEAKERS

(L & R)

Connecting up

        MIX OUTPUT L & Rsockets as described

previously.

Plug the vocal microphone into MIC 1 input. Note Inputs MIC 1 to MIC 4 are “Combo” type sockets



for live use will usually be the dynamic type, but in some AV situations condenser mics may be in



Use Input MIC 2 for the instrument. Acoustic instruments such as acoustic guitars will need to

be mic’d up. An electroacoustic guitar can either be connected directly using a standard guitar







directly.

If you need to use a stereo source such as a laptop, tablet or similar audio device, it is most easily

connected to STEREO input 2, which is available both in the form of a 3.5 mm jack socket and

separate left and right ¼” jack sockets.

Making a mix

digiLiVE

gain and then opening the channel and main faders. On switching on, INPUT 1-8 is selected in

MUTE, SOLO and SELECT

buttons control Inputs 1 to 8, and the screen display shows Channels 1 to 8.

INPUT GAIN CONTROLS

INPUT METERS

INPUT CHANNEL FADERS MIX OUTPUT FADER

LAYER BUTTONS

MIX METERS

If you are using a condenser mic, press the SELECT button for Channel 1, and then tap the Input

Mic IN

Touch the 48V



The 48V indicator at the top of the on-screen channel strip turns to red to remind you that phantom

power is on.

IMPORTANT: Only turn phantom power on when condenser mics are in use. Do not turn it on for



Adjust the GAIN control for Channel 1 while speaking into the mic. You will see an indication on

Channel 1’s input meter, which is duplicated by a smaller on-screen meter. A good setting is when

the meter just turns yellow on loud passages.

Set Channel 1’s fader to about the zero mark and move the MIX OUTPUT fader upwards. You

should hear the vocal mic when speaking into it, and see a level indication on the MIX meters.

These meters monitor the console’s output, which is feeding the speakers.

Repeat the above procedure for Channel 2, which is receiving the signal from the instrument.

If you are using the STEREO 2 input for an audio source as described in “Connecting up” above,

press the LAYER button marked INPUT 9-12 ST-USB.

Indice

Altri manuali Studiomaster Mixer musicale

Studiomaster

Studiomaster MIXDOWN Manuale utente

Studiomaster

Studiomaster 162BPX Manuale utente

Studiomaster

Studiomaster DJX-300 Manuale utente

Studiomaster

Studiomaster Professional DJX 825 Manuale utente

Studiomaster

Studiomaster C3X Manuale utente

Studiomaster

Studiomaster Diamond Pro-3 Series Manuale utente

Studiomaster

Studiomaster MIXDOWN Manuale utente

Studiomaster

Studiomaster Air-X Series Manuale utente

Studiomaster

Studiomaster digiLiVE 16 Manuale utente

Studiomaster

Studiomaster Powerhouse 300 Manuale utente

Studiomaster

Studiomaster Powerhouse 1000X-10 Manuale utente

Studiomaster

Studiomaster DJX 855 Manuale utente

Studiomaster

Studiomaster BASIC CUB Manuale utente

Studiomaster

Studiomaster palladium 1842 Manuale utente

Studiomaster

Studiomaster AiR 6 Manuale utente

Studiomaster

Studiomaster PRO VI 24.6 Manuale utente

Studiomaster

Studiomaster Platinum Basic MKI Manuale utente

Studiomaster

Studiomaster DigiLiVe16 Manuale utente

Studiomaster

Studiomaster DJX 925 Manuale utente

Studiomaster

Studiomaster Fusion+ Manuale utente

Studiomaster

Studiomaster Air Pro 24 Manuale utente

Studiomaster

Studiomaster air pro series Manuale utente

Studiomaster

Studiomaster 16x4x2 Manuale utente

Studiomaster

Studiomaster Auto 4 Manuale utente

Manuali Mixer musicale popolari di altre marche

Neve

Neve 8816 Manuale utente

Mackie

Mackie Onyx Analogue Mixer Manuale utente

Behringer

Behringer EUROPOWER PMP518M Manuale utente

Peavey

Peavey S-32 Sanctuary Series Manuale utente

Rane

Rane MP 4 Manuale utente

True

True T9 Touchscreen Console Manuale utente

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manuale utente

Roland

Roland M-160 Manuale utente

Yamaha

Yamaha MR1642 Manuale utente

Ecler

Ecler MAC40v Manuale utente

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manuale utente

Veeder-Root

Veeder-Root TLS-350 Series Manuale utente

Alto

Alto APM80.QUAD Manuale utente

Omnitronic

Omnitronic PM-211 Manuale utente

SoundCraft

SoundCraft B400 Manuale utente

Roland

Roland SoundCanvas SC-8820 Manuale utente

CARVIN

CARVIN RX 1200 Manuale utente

Roland

Roland M-16E Manuale utente

Studiomaster digiLiVE Manuale utente

Manuali Mixer musicale popolari di altre marche