Sunshine QJ-Y-2-35 Manuale utente
0
2-Post Lift
Instruction Manual
Model No.:QJ-Y-2-35
1
Statement
All rights reserved! Without the written consent of Yantai Haide Science and
Technology Co., Ltd. , no copy or replicate is allowed by any company or individual in
any format(like electronics, mechanical, copy, record and other format). Please read
this manual carefully before usage,do carefully operation,maintenance and repair by
rules.No obligation is taken by our company if operate not by rules.This manual is
designed for Yantai Haide Science and Technology Co., Ltd. usage, no obligation is
taken if use this manual for other machine.
Manufacturer
Yantai Haide Science and Technology Co., Ltd.
Address: No 14, Wuxi Road, Developed District, Yantai, China
Tel: 86-535-6853129
Fax: 86-535-6853815
Website: www.ythaide.com
Service
Yantai Haide Science and Technology Co., Ltd.
No 14, Wuxi Road, Developed District, Yantai, China
Tel: 86-535-6853129
Fax: 86-535-6853815
Email: [email protected]
2
ATTENTION
The damage during the transportation is due to carrier.
The safety performance is considered during design and
manufacture. Sufficient training and skillful operation can
only make the product safety guaranteed.
All the specifications requested on the machine label must be
obeyed for installation. Only a qualified electrician is allowed
operation.
Read this manual Carefully before usage, any usage or repair
is prohibited before reading this manual.
The company has the right to improve partial structure, no
obligation for update about products sold before.
Make sure lifting arm lock gears are fastened well before
lifting vehicles.
The damage due to overload weight, the user is responsible for
the responsibility.
3
Contents
Chapter I Introduction....................................................................4-6
Chapter II Safety instructions........................................................7-10
Chapter III Method of Packaging and Handling.........................11-12
Chapter IV Installation and Testing.............................................12-24
Chapter V Maintenance...........................................................25-26
Chapter VI Electric Safety...........................................................26-27
Chapter VII Hydraulic System....................................................28-29
Annex：
1. Products Quality Certificate
2. Products Inspectation Report
3. Product Warranty Card
4. Packing List
5. Exploded Diagram
4
Chapter I Introduction
1.1 Overview
Two post hydraulic car lift uses hydraulic power as the power source and with
mechanical security insurance. The lift has the advantages of simple structure, superior
performance, advanced technology, easy operation and safe usage. It is suitable for
vehicle repairing industry such as auto repair shop and auto repair retail-department
and other etc.
1.2 Structural performance
1.2.1 The lift is the Floorplate 2-Post Hydraulic Car Lift which takes the use conditions
of most users into full consideration in structure.The users can install the lift in the
appropriate place according to their own situation.
1.2.2 The hydraulic system uses hydraulic power unit,compact, safe, reliable, easy to
adjust, easy to maintain and has low failure rate. The hydraulic system is with manual
voltage regulator, revolving the overflow valve and screw to adjust systematic pressure
is ok.
Note: The system pressure has been adjusted prior to shipment,the users can
not adjust by themselves.
1.2.3 The lift is with mechanical security lock, simple and reliable in structure.
1.3 Operating system:
1.3.1 When the power is on, press the rise button to achieve the required high, release
the button, the device can be stopped.
1.3.2 Confirm the mechanical lock can lock the slider, if there is no safe locked, press
the down handle to make the slider down so that the mechanical lock can lock the slider.
1.3.3 During working pay attention to the mechanical lock, if the mechanical lock
doesn’t lock the slider effectively, should adjust to make it in the best condition.
5
1.4 Technical parameters:
Dimensions（QJ-Y-2-35)
Type
lifting
height
mm
Lifting
weight
KG
Pressure
Pneumatic
Mpa
Motor
Power
Kw
Voltage
V
Lifting
Time
S
noise
QJ-Y-
2-35
≤1820
≤4000
16Mpa
2.2KW
220V/380V
50Hz
≤80
≤85dB
6
Chapter II, Safety instructions
7
2.1 Safety specification
在Do not operate the equipment until you carefully read and fully understand the
instructions which the rules contain. Negligence may result in major accidents,
electrical shock or serious personal and property damage.
1. Know your machine
For your personal safety, please carefully read this manual, know applications and
limitations of the machine, and the potential risks associated with the machine.
2. Keep work area clean
Messy area and components can cause accidents.
3. Do not use the machine in dangerous environment
Do not use the machine in wet atmosphere or rain, or exposed to rain, keep work
area in good lighting.
4. Non-professional staff do not close
All visitors must remain a safe distance from the work area.
5. Do not operate the machine by force
Keep the speed of the machine in its design, operate with security implementation
6. Wear appropriate clothing
Avoid wearing loose clothing, gloves, necklaces or jewelry that can be involved
by moving parts, we recommend wearing non-slip shoes, wear the cap long hair can be
wrapped in.
7.Do not maintain the machine in working condition
The machine should be properly maintained on a regular basis, such as lubrication,
adjustment, but certainly don’t maintain it in working condition.
8. You must cut off the power before maintenance and replacing parts.
9. Do not run the machine without people’s charge.
10.machine label
8
2.2 The warning signs
9
Indice
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
