Surecom EP-816DX-FS Manuale utente

FCC Statement

This equipment can generate, use and radiate radio frequency energy and, if not

installed and used in accordance with the instructions in this manual, may cause

interference to radio communications. This equipment has been tested and found

to comply with the limits for a Class A computing device pursuant to Part 15 of the

CC rules, which are designed to provide reasonable protection against radio inter-

ference when operated in a commercial environment. Operation of this equipment

in a residential area is likely to cause interference, in which case the user, at his

own expense, will be required to take whatever measures are necessary to correct

the interference.

CE Declaration of Conformity

This is a Class A product. In a domestic environment product may cause radio

interference in which case the user may be required to take adequate measures.

Trademarks

All other brands and product names may be registered trademarks or trademarks

of their respective holders.

EP-816CX/DX

/DX-FS

16-Port 10/100M Ethernet Desktop/

Rack Mount Smart Switch

Users Manual

"%&$+,. 

www.surecom-net.com

1.One 16-Port 10/100M Ethernet Rack-Mount Smart Switch

2.One Power Cord

3.One Users Guide

4.Two Rack Mount Kits (Only for 816DX/DX- S)

One Pack of Screws (Only for 816CX)

Note: If any item is damaged or missing, please contact your supplier.

Package Contents

Hardware

ollowing describes the front panel, LED indicators, and rear panel of the

Switch.

Front Panel

The front Panel consist of 16 10/100M RJ-45 ports,16 port LED indicators,

and one fiber port.(only 816DX- S)

1 2

EP-816CX

EP-816DX-FS

EP-816DX

The 16-Port 10/100M Ethernet Desktop/Rack Mount Smart Switch

is the latest design in its Smart Switches series for easy installation

and high performance in an environment where traffic on the network

and the numbers of users increasing continuously. What makes the

16-Port 10/100M Ethernet Desktop/Rack Mount Smart Switch out-

standing from the crowd is its built-in VLAN and Trunk configuration.

With VLAN, stations in the same LAN segment can be grouped into

different network segment. The goal of VLANs is to allow for complete

mobility of workstation placement, yet keeping broadcast traffic to a

minimum. When enabling VLAN function, the workstation only can

communicate with other workstations which are in the same VLAN

group.

With Trunk, the backbone bandwidth can be increased to advance

the network performance by easing and smoothing traffic load at

peak hours. Small businesses and corporate branch offices can take

full advantage of 100Mbps ast Ethernet performance and preserve

existing desktop investment with no changes required to PCs, NICs,

cabling, drivers, or PC configurations.

Introduction

Rear Panel

LED Indicators

1. Power

This indicator operates when the Switch is turned on. If this indictor is

not lit, check the DC power connector to ensure proper insertion of the

power cord and that the power switch is turned ON.

2. Link/Act

These LED indicators are lighted up when there is a secure connection

(or link) to a device at any of the 16 ports. The LED indicators blink whenever

there is reception or transmission (i.e. Activity/ACT.) of data occurring

at any of the 16 ports.

3. FDX/Col

This LED indicator is lighted up when a respective port is in full-duplex

( DX) mode. Otherwise, it is O for half-duplex (HDX) operations. It

blinks when collisions are occurring on the respective port.

The LED indicators of the Switch include Power, Link/Act (Link Activity),

DX/COL. ( ull-Duplex/Collision) and 100Mbps link speed status.

4. 100

This LED lights when the transmission rate is 100Mbps. It is O when

the transmission rate is 10Mbps or no linking.

etwork Connections

ollowing describes how to connect this Switch to your ast Ethernet

network.

Switch to PC

A PC can be connected to the Switch via a twisted-pair Category 3, 4,5

for 10Mbps and category 5 for 100Mbps.(UTP/STP straight cable or cross-

over cable) The PC (equipped with a RJ-45 10/100Mbps jack) should be

connected to any of sixteen ports.

The LED indicators for PC connection are dependant on the LAN card

capabilities. If LED indicators are not illuminated after making a proper

connection, check the PC LAN card, the cable, Switch conditions and

connections.

The following are LED indicator possibilities for a PC to Switch connection:

1. The Link/ACT. LED indicator illuminates upon hookup.

2. The DX/COL. LED indicator depends upon LAN card capabilities.

3. The 100 LED indicator comes on for a 100Mbps connection and stays

off for 10Mbps connection.

RJ- 45 JACK

3 4

90~264VAC

47~63Hz

DIP 1~10

EP-816CX/DX/DX-FS

RJ- 45 JACK

EP-816DX-FS

EP-816CX/DX

Switch to Hub Switch to Switch (Other Devices)

DC 7.5V 8765432 Up-L in k

5 6

EP-816DX-FS

EP-816CX/DX

the fiber cable.

When the fiber module connects to the fiber board, but it doesnt connect to

After the fiber module connects to the fiber board, you have to restart

deLroloCsutat

kniLneerGffO

llu neerGnO

001neerGnO

Led Status

the power again.

A 10 BASE-T Hub can be connected to the switch via a twisted-pair Category

3,4,5 UTP/STP straight cable or crossover cable. And the 100BASE-TX Hub

should be connected via Category 5 UTP/STP straight cable or crossover cable.

The Switch can be connected to another switch or other devices (routers,

bridges, etc.)via a twisted-pair Category 5 UTP/STP straight or crossover

cable for 100Mbps connection.

Smart Function

F-XD/XD/XC618-PE

:sdradnat tenrehtET-EAB013.208EEEI

tenrehtEtsaFXF/XT-EAB001u3.208EEEI

xelpuD-lluFroflortnocwolfx3.208EEEI

noitaitogen-otuataW-N3.208dtEEEI/INA

tnerapsnarT:sepytemarF3.208EEEI

xelpuD-flaHroflortnocwolferusserPkcaB

:locotorPDC/AMC

:ygolopoTrat

noissimsnarT

:dohteMdrawrof-dna-derot

:etaRrefsnarT

:tenrehtE

:tenrehtEtsaF

)xelpuD-lluF(spbM02;)xelpuD-flaH(spbM01

)xelpuD-lluF(spbM002;)xelpuD-flaH(spbM001

:aideM

:T-EAB01

:XT-EAB001

:XF-EAB001

;)m001htgnelelbac.xaM(5,4,3.taCPTU

;)m001htgnelelbac.xaM(5.taCPTU

citporebifedom-itlumnorcim521/5.26,05

citporebifedom-elgnisnorcim521/9,8

:stroPfo.oNstroP54-JRspbM01/00161

gnisuoH

:lairetaMnorI

:reffuBMARecivedrepstibM1latoT

gniretliFtekcaP

gnidrawroF/

:etaR)spbM01&spbM001rof(troprepdeeps-eriW

:rewoP)CDA5/V3.3(zH36-74,V462-09CA

:noitpmusnoCW8

:erutarepmeT

:gnitarepO

:egarot

54~C

06~C

:ytidimuH

:gnitarepO

:egarot

%09~%01

%59~%5

:ecnamrofnoCAssalCkraMEC,AssalCCCF

Technical Specifications

1 2 3

4 5 6 7 9 10

1: Enable the VLAN function on each port.

0: Disable the VLAN function on each 16 ports. (default)

DIP 1:

Ext. Port#1,12 as one group, Port#2,12 as one group....

DIP 2:

1: Enable port trunk 0 which consists of ports 5,6,13,14

DIP 3:

DIP 4:

7 8

Enable Port Based VLAN configuration function:

VLAN topology type selection:

1:Select 15 VALNs (port#1~11,13~16) with 1 overlapping port

(port#12) topology.

Enable Port Trunk 0:

Enable Port Trunk 1:

OFF:0

 ON:1

DIP 8

.0: Disable port trunk 0

1: Enable port trunk 1 which consists of ports 7,8,15,16

Ext. Port#1,4,12 as one group, Port#2,4,12 as one group....

0: Disable port trunk 1

0:Select 14 VLANs(port#1~3,5~11,13~16)with 2 overlapping ports

(port#4,12)topology.(default)

DIP 6:

DIP 7/8:

00: Disable port based priority. (default)

01: Set port 5,13 as high priority ports.

10: Set port 5,6,13,14 as high priority ports.

11: Set port 5~8,13~16 as high priority ports.

DIP 9:

1: Enabled

0: Disabled (default)

DIP 10:

1: Enabled

High Priority: if pattern bits TOS/DS[0:5] =(E ) 101110;(A )

001010, 010010,011010, 100010;(Network Control)

11x000;Low Priority: if TOS/DS = other codepoint values.

0: Disabled (default)(DS = Differentiated Service)

Note:1. If any physical port of a trunk group has a link down,

a fault condition has happened on this trunk group.

Enable Port Trunk 2:

Enable Port Trunk 3:

Enable Port based priority Qo function:

Enable 802.1p VLAN Tag priority based Qo function:

Enable TCP/IP TO /D (Diff erv) based Qo function:

2. After you change the status of any DIP, you have to restart

the switch again.

DIP 5:

2-Year Warranty2-Year Warranty

2-Year Warranty

The manufacturer warrants to the original consumer /purchaser free from defects

in materials or workmanship for limited time from the original factory shipment

date. KEEP THI TUB FOR YOUR RECORD

Date Purchased:

Where Purchased:

From Whom:

Serial:

Model:

TO:

ATTN:

Place

Stamp

Here

WARRANTY REGISTRATION CARDWARRANTY REGISTRATION CARD

WARRANTY REGISTRATION CARD

Please complete this form and return it within 10

days of purchase to validate the warranty

Name/Title:

Company:

ddress:

Tel. No.: Signature:

Purchase Model: Serial No.:

Purchase from:

ddress:

Date of Purchase:

M NUF CTURER DISTRIBUTOR

1: Enable port trunk 2 which consists of ports 1,2,9,10

1: Enable port trunk 3 which consists of ports 3,4,11,12

0: Disable port trunk 2

0: Disable port trunk 3

Altri manuali per EP-816DX-FS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Surecom Interruttore

Surecom

Surecom EP-808X-R Manuale utente

Surecom

Surecom EP-505ST Manuale utente

Surecom

Surecom EP-716X Manuale utente

Surecom

Surecom EP-816DX-FS Manuale utente

Surecom

Surecom EX-516DX-T Manuale utente

Surecom

Surecom EP-804CG Manuale utente

Surecom

Surecom EP-824DX-FS Manuale utente

Surecom

Surecom EP-726DG Manuale utente

Surecom

Surecom EP-802X Manuale utente

Surecom

Surecom EP-816DX-FS Manuale utente

Surecom

Surecom EP-824DX-FS Manuale utente

Surecom

Surecom EP-710CG Manuale utente

Surecom

Surecom EP-710CG Manuale utente

Surecom

Surecom EP-517T Manuale utente

Surecom

Surecom EP-824DX-B Manuale utente

Surecom

Surecom EP-816DX-FW Manuale utente

Surecom

Surecom EP-824DX Manuale utente

Surecom

Surecom 824DXFS2B Manuale utente

Surecom

Surecom EP532D Manuale utente

Surecom

Surecom EP-804CG-S Manuale utente

Surecom

Surecom EP-516DX-T Manuale utente

Surecom

Surecom EP-808DG-S Manuale utente

Surecom

Surecom EP-816DX-AS Manuale utente

Surecom

Surecom EP-508 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente