Sveaverken Svea Manuale utente
Svea GNSS Receiver User Manual
©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
Copyright Notice:
Revisions
Sveaverken reserves the copyright for this manual and all
contents herein. No part of this manual may be reproduced,
extracted, reused, and/or reprinted in any form or by any
means without the prior written permission of Sveaverken.
This manual is subject to change without notice.
Version Date Description
1.0 2022.09.01 First release
©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
Others:
1. Do not disassemble the product without authorization,
which may invalidate the warranty.
2. Damages caused by force majeure events, such as
lightning strikes, high voltage, and collision, are not
covered by the warranty.
3. Use the device in strict accordance with the manual.
When connecting cables such as data cables, hold the
end of the plug and gently plug or unplug it. Do not pull
the plug by force or twist the plug, which may break the
pins.
Safety Instructions
Operation Environment:
Before using this product, make sure that you have read and
understood all the operation instructions and precautions in
the Svea GNSS Receiver User Manual.
1. Keep away from people, animals, electrical wires, tall
buildings, airports, signal towers, and other obstacles,
to avoid interference to GNSS signals and ensure the
positioning accuracy.
2. Avoid working in extreme weather such as heavy rain,
strong wind, thick fog, snow, and lightning.
©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
4. Use the regulated power supplies accepted by
Sveaverkan, and strictly follow the rated voltages, to
prevent damaging the radio, the eld controller, and the
receiver.
5. During charging, keep away from re sources such as
ammables and explosives, to avoid re and other serious
consequences.
6. During operation, do not power the receiver via the
Type-C interface and the aviation connector at the same
time.
7. Do not plug or unplug cables when the receiver is
powered on, and replace the damaged cables in time to
avoid personal injury.
©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
Contents
©2022 Sveaverken. All rights reserved. 1
Svea GNSS Receiver User Manual
1 About This Document
1.1 Introduction
1.2 GNSS Receiver
Figure 1.2 Interfaces and indicators
SVEA V1 GNSS receiver integrates high-precision GNSS
motherboard, data link, Bluetooth and other modules, with
delicate and simple structure, small and lightweight. V1 high
precision receiver fully supports BDS, GPS, GLONASS, Galileo
systems, accurate positioning, stable performance, V1 high
precision receiver makes your work more convenient and
efcient.
2 ©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
No. Name Description
1 Power button
Press and hold for 1 to 3 seconds
until the indicator turns solid
green, and release the button to
turn on the receiver.
Press and hold for 5 seconds to
turn off the receiver.
Press and hold for over 8 seconds
to enter the upgrade mode. In
this case, the four indicators
ash green, blue, green, and blue
respectively from left to right.
2Radio antenna
interface
For connection to the radio
antenna.
3Aviation connector
interface
For data transmission, and
connection to an external power
supply or an external radio.
4 Type-C interface For data transmission and
charging.
©2022 Sveaverken. All rights reserved. 3
Svea GNSS Receiver User Manual
No. Description
5
Power Indicator
(red, blue, and
green)
Green: battery level of 60%-100%;
blue: battery level of 30%-60%;
Red: low battery (<30%);
Charging: ashes red during
charging, and turns solid green after
charging is complete.
Data Indicator
(blue and
green)
Off: The base station does not
transmit differential data, or does not
start static collection.
Solid green: The data link is
established after settings.
Flashes green: The differential data is
transmitted, and the indicator ashes
at the transmission frequency.
Flashes blue: In the static mode, the
indicator ashes at the collection
interval when the interval ≥ 1s, and
ashes at 1s when the interval < 1s
4 ©2022 Sveaverken. All rights reserved.
Svea GNSS Receiver User Manual
No. Description
5
Satellite
Indicator
(red and
green)
Off: no satellite tracking;
Solid green: xed solution;
Flashes green: positioning but not in
the xed solution status;
Flashes red: satellite tracking but not
positioning;
Flashes green and red alternatively:
GNSS board exception.
Bluetooth
Indicator
(blue)
Off: no Bluetooth connection.
On solidly: Bluetooth connection
established.
The indicators are in the following colors during upgrade:
Power: green
Data: blue
Satellite: green
Bluetooth: blue
· Do not plug or unplug the charger repeatedly during
charging.
· Do not disassemble the receiver without authorization.
In case of a fault, contact the maintenance staff or your
dealer.
· Stop using the damaged pole. Repair or replace it in time.
Note:
Indice
