SVP SINGER C240 Manuale utente

INSTRUCTION MANUAL

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

C240

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the fol-

lowing:

Read all instructions before using this household sewing machine. Keep the instructions at a suitable place

close to the machine. Make sure to hand them over if the machine is given to a third party.

DANGER – To reduce the risk of electric shock:

• A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine

from the electric outlet immediately after using and before cleaning, removing covers, lubricating or when

making any other user servicing adjustments mentioned in the instruction manual.

WARNING – 7RUHGXFHWKHULVNRIEXUQV¿UHHOHFWULFVKRFNRULQMXU\WR

person:

• Do not allow to be used as a toy. Close attention is neccesary when this sewing machine is used by or near

children.

• Use this sewing machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized

service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing

machine and foot control free from the accumulation of lint, dust, and loose cloth.

.HHS¿QJHUVDZD\IURPDOOPRYLQJSDUWV6SHFLDOFDUHLVUHTXLUHGDURXQGWKHVHZLQJPDFKLQHQHHGOH

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

'RQRWSXOORUSXVKIDEULFZKLOHVWLWFKLQJ,WPD\GHÀHFWWKHQHHGOHFDXVLQJLWWREUHDN

• Wear safety glasses.

6ZLWFKWKHVHZLQJPDFKLQHRII³2´ZKHQPDNLQJDQ\DGMXVWPHQWLQWKHQHHGOHDUHDVXFKDVWKUHDGLQJ

needle, changing needle, threading bobbin, or changing presser foot, etc.

• Never drop or insert any object into any opening.

• Do not use outdoors.

'RQRWRSHUDWHZKHUHDHURVROVSUD\SURGXFWVDUHEHLQJXVHGRUZKHUHR[\JHQLVEHLQJDGPLQLVWUDWHG

7RGLVFRQQHFWWXUQDOOFRQWUROVWRWKHRII³2´SRVLWLRQWKHQUHPRYHSOXJIURPRXWOHW

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The foot control is used to operate the machine. Avoid placing other objects on the foot control.

• Do not use the machine if it is wet.

• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a

VLPLODUO\TXDOL¿HGSHUVRQLQRUGHUWRDYRLGDKD]DUG

• If the supply cord connected with the foot control is damaged, it must be replaced by the manufacturer or

LWVVHUYLFHDJHQWRUDVLPLODUO\TXDOL¿HGSHUVRQLQRUGHUWRDYRLGDKD]DUG

7KLVVHZLQJPDFKLQHLVSURYLGHGZLWKGRXEOHLQVXODWLRQ8VHRQO\LGHQWLFDOUHSODFHPHQWSDUWV6HH

LQVWUXFWLRQVIRU6HUYLFLQJRI'RXEOH,QVXODWHG$SSOLDQFHV

SAVE THESE INSTRUCTIONS

)RU(XURSHRQO\

This appliance can be used by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user maintenance shall not be made by children without

supervision.

7KHQRLVHOHYHOXQGHUQRUPDORSHUDWLQJFRQGLWLRQVLVOHVVWKDQG%$

The machine must only be used with foot control of type "C-9002" manufactured by CHIENHUNG

TAIWAN., LTD.

For outside Europe:

7KLVVHZLQJPDFKLQHLVQRWLQWHQGHGIRUXVHE\SHUVRQVLQFOXGLQJFKLOGUHQZLWKUHGXFHGSK\VLFDOVHQVRU\

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the sewing machine by a person responsible for their safety. Children should be

supervised to ensure that they do not play with the sewing machine.

7KHQRLVHOHYHOXQGHUQRUPDORSHUDWLQJFRQGLWLRQVLVOHVVWKDQG%$

The machine must only be used with foot control of type "C-9002" manufactured by CHIENHUNG

TAIWAN., LTD.

SERVICING OF DOUBLE INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No ground

means is provided on a double-insulated product, nor should a means for grounding be added to the product.

6HUYLFLQJRIDGRXEOHLQVXODWHGSURGXFWUHTXLUHVH[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGVKRXOG

EHGRQHRQO\E\TXDOL¿HGVHUYLFHSHUVRQQHO5HSODFHPHQWSDUWVIRUDGRXEOHLQVXODWHGSURGXFWPXVWEH

LGHQWLFDOWRWKRVHSDUWVLQWKHSURGXFW$GRXEOHLQVXODWHGSURGXFWLVPDUNHGZLWKWKHZRUGVµ'28%/(

,168/$7,21¶RUµ'28%/(,168/$7('¶

Table of contents

Introduction 5

Machine Overview...................................................5

Accessories.............................................................5

Presser Feet............................................................... 7

Stitch Chart..............................................................8

Preparations 9

Unpacking................................................................9

Connect to the Power Supply..................................9

Pack Away After Sewing..........................................9

Free Arm................................................................10

Leveling the Machine Base Plate..........................10

Thread Cutter ........................................................10

Spool Pins .............................................................10

Bobbin Winding ..................................................... 11

Inserting the Bobbin...............................................12

Threading the Machine..........................................12

Needle Threader ...................................................... 13

Threading for Twin Needle ....................................... 13

Integrated Even Feed System ..............................14

Presser Foot Pressure...........................................15

Thread Tension......................................................15

Needles .................................................................16

Changing the Needle.............................................16

Lowering Feed Teeth.............................................17

Presser Foot Lifter.................................................17

Changing the Presser Foot....................................17

Machine Operation Buttons...................................18

Warning Messages/Sound ....................................19

Sewing 20

Select a Stitch........................................................20

Stitch Adjustments.................................................20

Sewing Techniques................................................21

Multi-Stitch Zigzag Stitch.......................................... 21

Buttonholes .............................................................. 21

Sew on a Button....................................................... 22

Sewing Hems in Heavy Fabric................................. 23

Quilting..................................................................... 23

Blindhem .................................................................. 24

Sewing in Zippers..................................................... 24

Maintenance 25

Cleaning the Machine............................................25

Replacing the Stitch Plate .....................................25

Troubleshooting.....................................................26

15 16

Front Side

1. Threading slots

2. Thread cutter

3. LED lights

4. Built-in needle threader

5. Buttonhole lever

6. Needle bar

 6WLWFKSODWH

8. Bobbin cover

9. Lower thread guide

10. Presser foot lifter

11. Needle clamp screw

12. Needle thread guide

13. Presser foot bar and presser foot holder

14. Presser foot

15. Free arm

16. Removable storage compartment

6WLWFKFKDUW

18. Machine operation buttons and display

19. Handwheel

Introduction

Machine Overview

24 25 26 27

33 34 35 36

37 38 39

40 41

21 22 23

Top Parts

20. Presser foot pressure dial

21. Thread guides

6SRROFDSV

23. Attachment for auxiliary spool pin /

Bobbin winding spindle

24. Take-up lever

25. Thread tension discs

26. Bobbin winding tension disc

27. Thread tension dial

Rear Side

28. Main switch, connectors for power cord

and foot control

29. Handle

30. Presser foot lifter

,QWHJUDWHG(YHQ)HHG6\VWHP

6ZLWFKIRUORZHULQJWKHIHHGWHHWK

Accessories

Included Accessories

%REELQV6,1*(5®Class 15 transparent

EREELQV

34. Felt pad

6FUHZGULYHUIRUQHHGOHSODWH

36. Clearance plate

6SRROFDSODUJH

6SRROFDSVPDOO

6HDPULSSHUEUXVK

(GJHTXLOWLQJJXLGH

41. Auxiliary spool pin

Included Accessories Not in Picture

• Foot control

• Power cord

• Needles

• Hard cover

Presser Feet

Important: Make sure that the Integrated Even Feed System is disengaged when using presser foot 2A, 5B.

General Purpose Foot 0A with Integrated Even Feed System (shown as in

the display, attached on the machine upon delivery)

This foot is used mainly for straight stitching and zigzag stitching with a stitch

length longer than 1.0 mm.

All Purpose Foot 1A with Integrated Even Feed System (shown as in the

display)

This foot is used for decorative stitches. The groove on the underside of the foot is

GHVLJQHGWRÀRZVPRRWKO\RYHUWKHVWLWFKHV

Satin Stitch Foot 2A (shown as in the display)

When sewing decorative stitches or short zigzag stitches and other stitches with

less than 1.0 mm stitch length, use this foot. The groove on the underside of the

IRRWLVGHVLJQHGWRÀRZVPRRWKO\RYHUWKHVWLWFKHV

Blind Hem Foot 3 with Integrated Even Feed System (shown as in the

display)

This foot is used for blindhem stitches. The toe on the foot guides the fabric. The

red guide on the foot is designed to ride along the fold of the hem edge.

Zipper Foot 4 with Integrated Even Feed System

This foot can be snapped on either the right or the left of the needle, making it easy

to sew close to both sides of the zipper teeth. Move the needle position to the right

or left to sew closer to zipper teeth.

One-step Buttonhole Foot 5B (shown as in the display)

This foot has a space in the back to set the size of the buttonhole. The machine will

VHZDEXWWRQKROHWR¿WWKDWEXWWRQVL]H

Stitch Chart

Stitches  (QJDJH,QWHJUDWHG(YHQ)HHG6\VWHP

Stitch

No.

Presser foot

Stitch

No.

Presser foot

Stitch

No.

Presser foot

Stitch

No.

Presser foot

Stitch

No.

Presser foot

00 01 02 03 04 05 06 07 08 10 11 12 13

15 16 17 18 19 2520 21 22 23 24 26 27

28 29 30 31 32 33 34 35 36 37 38 39 40 41

42 43 44 45 46 47 48 49 50 51 52 53 54 55

56 57 58 59 60 61 62 63 64 65 66 67 68 69

Preparations

Unpacking

 3ODFHWKHER[RQDVWHDG\ÀDWVXUIDFH/LIWWKH

machine out of the box, remove the outer packaging

and lift off the machine carrying case.

2. Remove all outer packing material and the plastic

bag.

Note: Your sewing machine is adjusted to provide the

best stitch result at normal room temperature. Extreme

hot and cold temperatures can affect the sewn result.

&RQQHFWWRWKH3RZHU6XSSO\

$PRQJWKHDFFHVVRULHV\RXZLOO¿QGWKHSRZHUFRUGDQG

the foot control.

1RWH&RQVXOWDTXDOL¿HGHOHFWULFLDQLILQGRXEWDVWR

how to connect the machine to the power source. Unplug

the power cord when the machine is not in use.

For this sewing machine, foot control model C-9002

manufactured by CHIENHUNG TAIWAN., LTD must

be used.

1. Connect the foot control cord to the front socket on

WKHERWWRPULJKWVLGHRIWKHPDFKLQH$

2. Connect the power cord to the rear socket on the

ERWWRPULJKWVLGHRIWKHPDFKLQH%3OXJWKHFRUG

into the wall socket.

 3UHVVWKH212))VZLWFKWR21WRWXUQRQSRZHU

DQGOLJKW&

3DFN$ZD\$IWHU6HZLQJ

 6ZLWFKWKHPDLQVZLWFKRII

Note: After switching off, residual power may still

remain in the machine. This may cause the light to stay

on for a few seconds while the power is consumed. This

LVQRUPDOEHKDYLRUIRUDQHQHUJ\HI¿FLHQWDSSOLDQFH

2. Unplug the cord from the wall socket and then from

the machine.

3. Unplug the foot control cord from the machine.

Wind the cord around the foot control for easy

storage.

 3ODFHDOODFFHVVRULHVLQWKH5HPRYDEOH6WRUDJH

&RPSDUWPHQW6OLGHWKH5HPRYDEOH6WRUDJH

Compartment on to the machine around the free

arm.

5. Place the foot control in the space above the free

arm.

6. Put on the hard cover.

For the USA and Canada

7KLVVHZLQJPDFKLQHKDVDSRODUL]HGSOXJRQHEODGH

ZLGHUWKDQWKHRWKHU7RUHGXFHWKHULVNRIHOHFWULF

VKRFNWKLVSOXJLVLQWHQGHGWR¿WLQDSRODUL]HGRXW-

OHWRQO\RQHZD\,IWKHSOXJGRHVQRW¿WIXOO\LQWKH

RXWOHWUHYHUVHWKHSOXJ,ILWVWLOOGRHVQRW¿WFRQWDFW

DTXDOL¿HGHOHFWULFLDQWRLQVWDOOWKHSURSHURXWOHW'R

not modify the plug in any way.

Free Arm

To use the free arm, slide off the removable storage

compartment. When attached, a hook keeps the

removable storage compartment securely attached to the

machine. Take off the removable storage compartment

by sliding it to the left.

Leveling the Machine Base Plate

To make sure your machine stands steadily on your

sewing surface you can adjust the base plate height.

7XUQWKHEDVHSODWHDGMXVWLQJVFUHZ$E\KDQG7XUQ

clockwise to lower and counter-clockwise to raise the

base plate.

Thread Cutter

To use the thread cutter, pull the thread from back to

IURQWDVVKRZQ%

Spool Pins

Your machine has two spool pins, a main spool pin and

an auxiliary spool pin. The spool pins are designed for

many types of thread. The main spool pin is used in a

KRUL]RQWDOSRVLWLRQWKHWKUHDGUHHOVRIIWKHVSRRO7KH

horizontal position can be used for most sewing and

embroidery threads. The auxiliary spool pin is used in a

vertical position.

Main Spool Pin

Place a spool cap and the thread spool on the spool pin.

Make sure that the thread reels over the top and slide on

the second spool cap.

Use a spool cap slightly larger than the thread spool.

For narrow thread spools, use a smaller spool cap in

front of the spool. For large thread spools, use a larger

spool cap in front of the spool.

7KHÀDWVLGHRIWKHVSRROFDSVKRXOGEHSUHVVHG¿UPO\

against the spool. There should be no space between the

spool cap and the thread spool.

Large spool cap

Small spool cap

Indice

Lingue:

Altri manuali SVP Macchina da cucire

SVP

SVP SINGER 3210 Manuale utente

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Singer

Singer 2517 Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

Singer

Singer 148-5 Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Singer

Singer 15-91 Manuale utente

Brother

Brother BB370 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Singer

Singer 6038 Manuale utente

Singer

Singer 413K Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente