switel BSW 200 Manuale utente
Smart iCAM
Remote HD Wi-Fi
DIY Surveillance Camera
Please read carefully before using this equipment.
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
User's Manual
Manuel de l'utilisateur
Manual del Usuario
Bedienungsanleitung
Manuale d'uso
200
Before you start you need:
iPhone, iPad,
Android smartphone
or Android tablet
Wi-Fi router
1
Smart iCAM
Smart iCAM
Watch the things that matter to you
anytime and anywhere
iCAM is a wireless network camera. It can connect with your
smartphone or tablet via wireless technology, and monitor everything
that matters to you on your smartphone or tablet anywhere and anytime.
Smart
Smartphone,Tablet
Wi-Fi Router
Internet
2
Product Layout
1.Light sensor
2.Microphone
3.Camera lens
4.Infrared LEDs
5.
6.Antenna
Speaker
Camera
7.
8.Power adapter socket
9.Temperature sensor
10.Reset button
11.Power/Status LED
Micro SD Card slot
Package Contents
One Camera
One Adapter
One Screw and One Wall Anchor
EN
ENGLISH
1
2
Two Cable Clips
This User's Manual
6
7
8
9
1
2
3
4
5
10
11
3
Getting Started
Download Smart iCAM app
3.1
download the app from Apple App Store (iPhone/iPad) or
Google Play Store (Android).
Key in the keyword “Smart iCAM” or scan the QR code and
3
First-time Setup
3.3
the other end into the back of the camera to turn on the camera.
The LED on the camera will light up light orange. It takes about 30
to 60 seconds for initial setup and then the LED will start to blink a
dark orange color.
Plug one end of the provided power adapter into a wall outlet and
3.
2
Power on the camera
4
3.3.1
Connect your smartphone or tablet to the camera
2. Select “Smart-iCAM _XX : XX : XX…” under Wi-Fi Networks
and enter the password. The default password is “12345678”.
1. Turn on the Wi-Fi of your smartphone or tablet.
The welcome screen will be displayed.
3. Launch the Smart iCAM app on your smartphone or tablet.
Networks and the LED on the camera is not blinking, please
follow step 3.6 of this user manual to reset the camera.
Note: If you cannot find “Smart-iCAM_XXXXXX” under Wi-Fi
5
The camera will scan for available Wi-Fi networks (SSID). Select the
name of the Wi-Fi network (SSID) that you wish to connect with the
camera and enter the password of your Wi-Fi router if necessary.
First-time setup is now complete.
4. Set up an Internet connection
will turn green after about 1 minute.
Wi-Fi SSID is the wireless network name.
3:
connect to, please make sure the camera and the Wi-Fi
router are within range of each other.
4: If you type in the wrong SSID password the camera will
beep three times and then reset to factory default
automatically. Please close the App and follow step 3.3 in
the user manual to set up the camera again.
5: If you have completed Internet set up but the Power/Status
LED is still orange, please check the Wi-Fi router is OK and
make sure the camera and Wi-Fi router are within range of
each other.
6: Make sure your mobile phone is connected to the Wi-Fi
AP/Router you assigned after set up
Note 1: Once you complete Internet setup, the LED on the camera
2:
If the camera cannot find the Wi-Fi network you wish to
6
3.3.2
Viewing live video
2. Touch the image display area of the screen and slide on the
screen for pan-tilt function.
1. Select the camera icon in Camera List to view video from the camera.
apart for digital zoom function.
3. Touch the image display area of the screen and move fingers
7
Add camera to other smartphones or tablets
3.4
3.4.1
the camera.
If you enter the wrong password, please tap the camera
icon again and then retype the correct password.
7. Tap the camera icon in Camera List to view video from
Note:
Add camera in LAN (Your mobile phone and
camera are connected to the same Wi-Fi router.)
2. Turn on the Wi-Fi of your smartphone or
tablet and then tap the screen to select
which Wi-Fi router your camera has been
connected to.
3. Launch the Smart iCAM app on your
smartphone or tablet.
4. Tap the “Add New Camera” icon to add
a camera.
5. Tap the screen to select which camera
you wish to add under
“Available Camera List”.
6. Enter password for the camera.
The default password is “admin”.
1. Download the Smart iCAM app.
8
3.4.2
Add camera through remote setup (Your mobile and
camera are NOT connected to the same Wi-Fi router.)
2. Please make sure your smartphone or tablet can link to the
Internet via a Wi-Fi router or 3G/4G mobile network.
3. Launch the Smart iCAM app.
4. Tap the “Add New Camera” icon.
1. Download the Smart iCAM app.
Camera” screen.
6. Tap in the UID and password of the camera you want to add.
Note 1: Tap the i (information) icon in live video screen to
get UID information. The UID is 20 characters.
2: The default password is “admin”.
3: If you enter the wrong password, please tap the camera
icon and then retype the password.
7. Tap the camera icon in Camera List to view video from the camera.
5. Tap the “Add Remote Camera” icon to enter “Add a Remote
Add more cameras (Multi-camera)
3.5
each camera.
Note: Up to 10 cameras can be added.
Follow step 3.3 in the user manual to complete first-time setup for
9
button (using a small object or a pin) for 5 to 10 seconds.
The camera will beep 3 times and take about 1 minute to reset. The
LED will start to blink a dark orange color.
Note 1: If you do not hear a beeping sound, reset has failed. Please
turn the camera back on and press the rest button again.
Note 2: If you replace a new Wi-Fi router or if you forget the camera
password, the camera needs to be reset to factory default.
Please refer to 3.3 - First time setup in the user manual, to
set up the camera again.
When the camera has been on for at least 1 minute, press the reset
3.6
Reset the camera to factory default
Operation Mode
Viewing Live Video
4.1
4
4
6
5
1
2
3
Indice
Lingue:
Altri manuali switel Telecamera di sicurezza
