Symbol LS 3020 Istruzioni operative

LS 3020-I037A Special Operating Instructions

(70-04014-37)

Revision A: March 1994

Special Operating

Instructions



LS 3020-I037A Special Operating Instructions

(70-04014-37)

Revision A: March 1994

2-4

This version of the software enables the scan-

ner to verify that the Motorola terminal is

ready before attempting a decode.

Defaults

Baud Rate: 2400

Stop Bits: 1

Laser Enable Mode: Disable

Laser Enable Mode

The Laser Enable Mode parameter indicates

whether the LS 3020 must establish communi-

cation with the Motorola terminal prior to at-

tempting a decode. If this parameter is

enabled, the following sequence occurs when

the trigger is pulled:

• The scanner sends an ENQ (05H) to

the terminal.

• ThedecodeLEDﬂashestoindicatethe

scanner is waiting for acknowledg-

ment from the terminal. The LED

stops ﬂashing when ACK (06H) or

NAK (15H) is received, or the trigger

is released.

• If an ACK is received, the unit at-

tempts a decode.

• If a NAK is received, the unit issues

four short low beeps.

LS 3020-I037A Special Operating Instructions

(70-04014-37)

Revision A: March 1994

3-4

Aiming LEDs andTrigger Posi-

tions

The LS 3020-I037A does not generate an aim-

ing LED.

An aiming LED is provided for the

LS 3020LR-I037 or LS 3020ALR-H037 when

the trigger is pulled. These scanners support

a two-position trigger to allow the user to aim

prior to activating the motor.

Whenthetriggerispulledintheﬁrstposition,

the aiming LED is generated. If the trigger is

not pulled to the second position, the aiming

LED turns off after approximately two sec-

onds.

Triggering and Laser Enable

Mode

If the Laser Enable Mode is disabled, the scan-

ning motor is activated as soon as the trigger

is pulled to the second position.

If Laser Enable Mode is enabled and the trig-

ger is not pulled to the second position, the

aiming LED remains on for two seconds, and

the unit does not transmit an ENQ. If the trig-

ger is pulled to the second position, the unit

transmits the ENQ to the terminal.

• If an ACK is received, the unit at-

tempts a decode.

• If a NAK is received, the aiming LED

is turned off, and the unit issues four

short low beeps.

• If the unit does not receive anACK or

NAK, the aiming LED remains on for

two seconds. The decode LED contin-

ues to ﬂash until anACK or NAK is re-

ceived.

LS 3020-I037A Special Operating Instructions

(70-04014-37)

Revision A: March 1994

4-4

Laser Enable Mode

To enable or disable this parameter:

1. Scan the

ENABLE LASER MODE

bar

code.

2. Scan either

ENABLE

DISABLE

3. Scan

ENTER

ENABLE LASER MODE

ENABLE

DISABLE

ENTER

Indice

Altri manuali Symbol Lettore di codici a barre

Symbol

Symbol DS4308 Manuale utente

Symbol

Symbol PDT 3100 Series Manuale di installazione e funzionamento

Symbol

Symbol LT 1850 Manuale utente

Symbol

Symbol LS 3603 Istruzioni operative

Symbol

Symbol LS 4008i Manuale di installazione e funzionamento

Symbol

Symbol LS 2000MX series Manuale utente

Symbol

Symbol LS 4071 Manuale utente

Symbol

Symbol LS 4208 Manuale utente

Symbol

Symbol LS 9208 Manuale utente

Symbol

Symbol CS4070 Manuale di installazione e funzionamento

Symbol

Symbol DS3578 Manuale utente

Symbol

Symbol DS3478 Manuale di installazione e funzionamento

Symbol

Symbol SYMBOL DS6707 Manuale di installazione e funzionamento

Symbol

Symbol LS 2104 Istruzioni operative

Symbol

Symbol LS 9208 Manuale utente

Symbol

Symbol LS 1006 Manuale di installazione e funzionamento

Symbol

Symbol LS 1220 Manuale di installazione e funzionamento

Symbol

Symbol DS3478 Manuale utente

Symbol

Symbol MicroKiosk MK1000 Manuale di installazione e funzionamento

Symbol

Symbol LT 1810 Manuale utente

Symbol

Symbol LS 4071 Manuale di installazione e funzionamento

Symbol

Symbol CS1504 Manuale utente

Symbol

Symbol WSS 1000 Manuale utente

Symbol

Symbol LS 4208 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente