Symbol SYMBOL LS7808 Manuale utente

Symbol LS7808 Horizontal Slot Scanner

Quick Reference Guide

2 Symbol LS7808 Horizontal Slot Scanner

Motorola reserves the right to make changes to any product to improve reliability,

function, or design.

Motorola does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under

any patent right or patent, covering or relating to any combination, system, apparatus,

machine, material, method, or process in which Motorola products might be used. An

implied license exists only for equipment, circuits, and subsystems contained in

Motorola products.

MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered

trademarks of Motorola, Inc. Other product names mentioned in this manual may be

trademarks or registered trademarks of their respective companies and are hereby

acknowledged.

Motorola, Inc.

One Motorola Plaza

Holtsville, N.Y. 11742-1300

http://www.motorola.com/enterprisemobility

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.motorola.com/enterprisemobility/warranty

Quick Reference Guide 3

Introduction

This guide is designed to assist during routine LS7808 operation. Detailed

information about unpacking, installation, performance specifications,

programming and troubleshooting can be found in the LS7808 Product

Reference Guide (p/n 72E-73952-XX).

Product Description

The Symbol LS7808 horizontal slot scanner is a high performance,

omni-directional scanner that supports high throughput applications at the point of

sale (POS). The scanner reads all retail symbologies and has multi-interface

capability to interface to all popular POS devices. The scanner is designed for

horizontal in-counter mounting and allows slide-through scanning of items

enhancing productivity and throughput. The scanner has an integrated Electronic

Article Surveillance (EAS) antenna for use with Checkpoint®EAS systems.

The LS7808-SR20007TCR features standard tin oxide glass, and the

LS7808-SR2X009SCR features scratch proof sapphire glass.

Configurations

The Symbol LS7808 is available in the following configurations.

Configuration Features

Symbol LS7808-SR20007TCR Standard (tin oxide) glass window; twilight

black; Checkpoint

EAS; RoHS compliant.

Symbol LS7808-SR20009SCR Scratch proof (sapphire) glass window;

stainless steel bezel top; Checkpoint

EAS;

RoHS compliant.

Symbol LS7808-SR22009SCR Scratch proof (sapphire) glass window;

stainless steel bezel top; Checkpoint

EAS;

RoHS compliant; Remote Scanner

Management (RSM) ready “out of the box.”

A stainless steel in-counter mounting kit (p/n 12-17206-02R) is required for all

models. See the Mounting Instructions and EAS Installation Guide for

mounting/installation instructions.

4 Symbol LS7808 Horizontal Slot Scanner

Operating the Scanner

Parts

Power

The LS7808 does not have an on/off switch. It is ready to scan when

connected to a power supply.

Indicator Lights

The scanner employs an LED with a combination of red and green lights

to indicate operation and decode status. See LED Definitions on page

10 for the different light combinations and their meanings.

If the scanner is not operating normally, contact the technical person in

charge of scanning, or call Motorola Enterprise Mobility Support (see

details on the back cover).

LED Indicator

Connector Cover

(Connector Ports behind

Connector Cover)

Speaker

Bucket

Quick Reference Guide 5

Sleep Mode

The scanner automatically enters Sleep mode when it has been inactive

for a specified length of time. The scanner has two levels of sleep: laser

and motor. In laser sleep mode, after ten seconds of inactivity the laser

pulses at a 50% rate, and then drops to 3% after a specified time. In

motor sleep mode, the scanner is programmed to turn off the motor and

the laser.

To wake the scanner from sleep mode, present a bar code at the scanner

window.

Beeper Volume

The scanner emits a short beep when it successfully reads a bar code.

The volume of the beep is changed electronically by a command sent by

the host, or by scanning one of the beeper volume bar codes in the

LS7808 Product Reference Guide. See Beeper Definitions on page 8.

Connections

The scanner’s ports are at the lower edge of the scanner. Remove the

connection cover to access the ports.

EAS

Power

Port

EAS

Interlock

Port

(Behind

Label)

Secondary

Scanner

Port

RS-232

Auxiliary

Port

Connector

Cover

Host Port

6 Symbol LS7808 Horizontal Slot Scanner

Routing the Cables

The scanner case has several channels to route the outgoing cables so

that they are organized and don’t hinder the scanner’s placement. After

placing the cable connectors in the appropriate scanner ports, route the

cables through the nearest channel.

For a cable with a Y-connector (containing both power and interface

connectors):

1. Connect the power and interface cables to the appropriate ports.

2. Route the cables according to the following diagram.

Installing the Scanner

The LS7808 mounts in the counter with the face of the scanner flush with

the counter top. Refer to the LS7808 Product Reference Guide for

detailed installation instructions.

Quick Reference Guide 7

Scanning Bar Codes

Install and program the scanner. Refer to the LS7808 Product Reference

Guide for programming instructions. For assistance, contact the local

supplier or Motorola Enterprise Mobility Support (see details on the

back cover).

To scan a bar code:

1. Ensure all cable connections are secure.

2. Orient the item with the bar code facing the scanner window.

3. Move the item through the active scan area (see page 8) in the

direction of the scan arrow, or place the item in front of the scanner.

4. Upon successful decode, the scanner beeps and the green LED

flashes momentarily.

Product Flow

Scan Arrows

Scanner

Window

8 Symbol LS7808 Horizontal Slot Scanner

Active Scan Area

The active scan area, in front of the scanner window, is optimized to scan

items as they move in the direction of the scan arrow.

The dotted areas below represent the active scan area.

Beeper Definitions

The scanner communicates with the user by emitting different beeper

sequences and patterns. See the Beeper Indications table below for

beeper sequences that occur during both normal scanning and while

programming the scanner.

Beeper Sequence Indication

Standard Use

3 high beeps Power up.

High beep A bar code symbol was decoded (if decode beeper is

enabled).

4 long low beeps A transmission error was detected in a scanned symbol.

The data is ignored. This occurs if the scanner is not

properly configured. Check option setting.

5 low beeps Conversion or format error.

High-high-high-low

beeps

RS-232 receive error on RS-232 host or RS-232 auxiliary

port.

Scanner

Window

Quick Reference Guide 9

Code 39 Buffering

High-low beep New Code 39 data was entered into the buffer.

3 long high beeps Code 39 buffer is full.

Low-high-low beeps The Code 39 buffer was erased or there was an attempt to

clear or transmit an empty buffer.

Low-high beeps A successful transmission of buffered data.

Host Specific

USB only

4 short high beeps Scanner has not completed initialization. Wait several

seconds and scan again.

Scanner gives a

power-up beep after

scanning a USB

Device Type.

Communication with the bus must be established before

the scanner can operate at the highest power level.

This power-up beep

occurs more than

once.

The USB bus may put the scanner in a state where power

to the scanner is cycled on and off more than once. This is

normal and usually happens when the PC cold boots.

RS-232 Host only

High beep A <BEL> character is received and Beep on <BEL> is

enabled.

RS-232 Auxiliary Port only

High beep A complete block of data was received and sent to the

host, either due to a carriage return or because the

two-second serial response timeout has elapsed.

4 long low beeps A data overrun condition has occurred. Abstain from

scanning data from other ports when large amounts of

data are sent to the RS-232 Auxiliary port.

Beeper Sequence Indication

10 Symbol LS7808 Horizontal Slot Scanner

LED Definitions

In addition to beeper sequences, the scanner communicates with the

user via an LED display. The Standard LED Definitions table defines LED

indications that display during scanning.

Maintenance

Cleaning the exit window is the only maintenance required. A dirty or

scratched window may affect scanning activity.

-Remove any dirt particles with a damp cloth.

-Wipe the window with a tissue moistened with ammonia or water.

To clean the exit window:

1. Insert a coin into the large screw heads on the front of the scanner

and turn counter-clockwise.

2. Lift off the window.

3. Wipe clean the underside of the upper window.

4. Wipe clean the top surface of the lower window.

5. Re-install the top cover by tightening the two large screws.

To change the exit window:

1. Remove the window as described above.

2. Replace with a new window.

3. Reinstall the top cover by tightening the two large screws.

LED Indication

Off No power is applied to the scanner.

Green The scanner is on and ready to scan.

Momentary flash A bar code was successfully decoded.

Slow continuous red flashing, green on The scanner is in programming mode.

Fast continuous red flashing, green on There is an internal problem; the laser

is shut off for regulatory reasons.

Green on (and laser blinking) Scanner is in low power blink mode.

Red and green on Scanner is in low power (sleep) mode

and laser shutdown mode.

Altri manuali per SYMBOL LS7808

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Symbol Scanner

Symbol

Symbol LS 4800 Manuale utente

Symbol

Symbol LS 400Xi Manuale di installazione e funzionamento

Symbol

Symbol WS 1200 Manuale utente

Symbol

Symbol P470 Manuale utente

Symbol

Symbol CS 2000 Manuale utente

Symbol

Symbol P 300PRO Manuale di installazione e funzionamento

Symbol

Symbol LS 3X80-I233A Manuale utente

Symbol

Symbol LS 5700 Manuale di installazione e funzionamento

Symbol

Symbol SYMBOL DS6707 Manuale di installazione e funzionamento

Symbol

Symbol WSS 1000 Manuale di installazione e funzionamento

Symbol

Symbol P370 Manuale di installazione e funzionamento

Symbol

Symbol PDT 7200 Series Manuale utente

Symbol

Symbol MiniScan MS XX07 Series Guida rapida alla configurazione

Symbol

Symbol Symbol DS6708 Manuale di installazione e funzionamento

Symbol

Symbol LS 9208 Manuale

Symbol

Symbol LS 6000 Series Manuale di installazione e funzionamento

Symbol

Symbol LS 5700 Manuale utente

Symbol

Symbol LS 1000 Manuale utente

Symbol

Symbol LS 1220 Manuale utente

Symbol

Symbol P370 Manuale utente

Symbol

Symbol LS 1004 Manuale di installazione e funzionamento

Symbol

Symbol PL470 Base Cradle Manuale utente

Symbol

Symbol Cyclone M2000 Series Manuale di installazione e funzionamento

Symbol

Symbol Symbol DS6708 Manuale di installazione e funzionamento

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente